| Price | €99.00 €78.98 incl. GR VAT | €267.06 €130.19 incl. GR VAT | €57.20 €49.00 incl. GR VAT | €117.79 €116.62 incl. GR VAT | €324.60 €275.91 incl. GR VAT | €167.00 €155.00 incl. GR VAT |
| Content | • 5” Mineral filled polycone
• Rubber surround
• Magnesium basket
• Smooth roll off
• Neutral midrange
• Vented pole piece
• Flange 140mm
• Cut-out 112.3mm
• Depth 64.5mm
Nominal impedance [ohm]8
Voice coil resistance [ohm]5.7
Nominal power [W]40
Short term max power [W]-
Long term max power [W]-
Operating power [W]6.3
Sensitivity [dB]88
Frequency range [Hz]60-5000
Free air resonance [Hz]60
Voice coil diameter [mm]25
Voice coil height [mm]14
Air gap height [mm]6
Voice coil inductance [mH]0.7
Eff. diaphragm Area [cm²]86
Moving mass [g]7.5
Magnet weight [g]/[oz]415/14.6
Force factor [Bl]6.0
VAS [l]10
Qms1.38
Qes0.43
Qts0.33
Znom 8 ohm
Re 5.7 ohm
Le@1kHz .7 mH
fs 60 Hz
Qms 1.38
Qes 0.43
Qts 0.33
Mms 7.5 g
Cms - mm/N
Sd 86 cm2
BL 6.0 Tm
Vas 10 ltrs
Xmax 4 mm peak
VC Ø 25 mm
Sensitivity 2.83V / 1m 88 dB
Nom. Power DIN 40 W
Magnet weight 415 g
Weight : 1.5Kg | Weighing a mere 2 lbs., the Pro 5MRN neodymium midrange / tweeter driver features a wide usable frequency range and water resistant epoxy treated paper cone for a warm, rich tone. The truncated cast frame chassis allows for tight placement in your pro audio or car audio cabinet, and pair it with a Kappalite model for the ultimate in ultra-light bass guitar performance.
SPECIFICATION
- Nominal Basket Diameter: 5“, 127 mm
- Nominal Impedance*: 8 Ω
- Power Rating**
- Watts: 65 W
- Music Program: 130 W
- Resonance: 223 Hz
- Usable Frequency Range: 325 Hz - 20 kHz
- Sensitivity***: 93.1 dB
- Magnet Weight: 4 oz.
- Gap Height: 0.236“, 6 mm
- Voice Coil Diameter: 1“, 25 mm
THIELE & SMALL PARAMETERS
- Resonant Frequency (fs): 223 Hz
- DC Resistance (Re): 5.45 Ω
- Coil Inductance (Le): 0.18m H
- Mechanical Q (Qms): 2.8
- Electromagnetic Q (Qes): 0.93
- Total Q (Qts): 0.7
- Compliance Equivalent Volume (Vas): 0.85 liters / 0.03 cu.ft.
- Peak Diaphragm Displacement Volume (Vd): 3.6 cc
- Mechanical Compliance of Suspension (Cms): 0.12 mm/N
- BL Product (BL): 5.84 T-M
- Diaphragm Mass Inc. Airload (MMs): 4 grams
- Efficiency Bandwidth Product (EBP): 239
- Maximum Linear Excursion (Xmax): 0.51 mm
- Surface Area of Cone (Sd): 71.3 cm2
- Maximum Mechanical Limit (Xlim): 5.0 mm
MOUNTING INFORMATION
- Recommended Enclosure Volume
- Sealed: 0.85-1.56 liters / 0.03-0.06 cu.ft.
- Vented: - liters / - cu.ft.
- Driver Volume Displaced: 0.494 cu.ft. / 14 liters
- Overall Diameter: 5.25“, 133.4 mm
- Baffle Hole Diameter: 4.28“, 108.7 mm
- Front Sealing Gasket: Yes
- Rear Sealing Gasket: Yes
- Mounting Holes Diameter: 0.18“, 4.6mm
- Mounting Holes B.C.D.: 4.79“, 121.7mm
- Depth: 2.16“, 54.8 mm
- Net Weight: 2 lbs, 0.91 kg
- Shipping Weight: 2.2 lbs, 1 kgs
MATERIALS OF CONSTRUCTION
- Coil Construction: Pure aluminum voice coil
- Coil Former: Kapton former
- Magnet Composition: Neodymium magnet
- Core Details: Vented and Extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Treated paper cone
- Cone Edge Composition: Cloth cone edge
- Dust Cap Composition: Treated paper dust cap
| ELECTRO VOICE genuine replacement woofer for EVID 4.2
- Genuine Electro Voice 4" Woofer
- 16 Ohm
- F.01U.150.288
|
LSR25P LF Driver Description:
This is the JBL low frequency driver (MPN 124-10002-00) for the LSR25P powered reference monitor. It is a genuine JBL replacement part sold to you sealed just the way we get it from JBL. The device is mounted in a frame which bolts into the front baffle of the speaker from the inside. You must dismantle the speaker to replace this driver. Order carefully, returns for your mistakes are not allowed.
|
- 90 dB sensitivity 1 W 11m
- 130 W + 25 W Power handling
- 1.5" + 1" voice coil
- Single point source providing coherent wave front
- 900 conical dispersion
- Optimal for compact 2-way systems
| JBL Replacement Woofer for Control 25 Loudspeaker 124-10000-00
Replacement woofer for JBL's Control 25 Loudspeaker. |
Reviews
There are no reviews yet.