X VIVE Metal Practice Amp GA-4

Dimensions:79.5 x 75.5 x 15.5mm 
Weight: 40g 
Controls: Gain, Tone, Volume; STANDBY/ON/FX switch 
Terminals: Phone Jack/AUX In Jack

• Type: 6-channel
• Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
• Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
• Input Impedance: 13 kOhm
• Line Outputs: Main Output (stereo, balanced)
• Line Output Connectors: XLR and 6.3 mm jack L&R
• Headphone Outputs: 6 x 3
• Headphone Output Connectors: 6.3 mm stereo jack
• Power Output: 6 x 125 mW
• Minimal Connected Impedance per Channel: 8 ohms
• Frequency Response: 20 Hz - 20.000 Hz
• Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
• Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
• Power Supply: IEC power socket
• Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
• Power Consumption: 40 W
• Cabinet Material: metal
• Cabinet Surface: painted
• Width: 483 mm
• Height: 44 mm
• Depth: 217 mm
• Accessories (included): power cord

Specifications
General

Frequency response
    

 
    

20 Hz - 20  kHz (+0 dB, -1.5 dB)

Signal-to-noise ratio
    

 
    

100  dB (IHF A-weighted, input level control min.)

Channel separation
    

 
    

80 dB between adjacent channels

Line input
    

 
    

Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced

   Input impedance
    

 
    

40 kOhm

   Nominal level
    

 
    

-10 dBV (0.3 V)

Headphone outputs
    

 
    

four 6.3 mm stereo jacks

   Maximum output power
    

 
    

2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)

Power supply
        

230 V AC, 50 Hz

Power consumption
    

 
    

10 W

Dimensions (W x H x D)
        

482  mm x 44  mm x 196  mm

Weight
    

 
    

4 kg

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Overview

Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.

Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability

• Type: passive
• Number of channels: 2
• Number of inputs: 2
• Input connections: XLR Combo / 3.5mm stereo jack
• Input type: balanced/unbalanced
• Maximum input level: +20 dBu
• Input impedance: 10 kohms balanced/ 5 kohms unbalanced
• Number of outputs: 2
• Output connections: XLR/m, 3.5 mm stereo jack
• Output type: balanced/unbalanced
• Max output level: +20 dBu
• Output impedance: 600 ohms
• Frequency response: 10Hz - 40 kHz +/- 1 dB
• THD: 0,001 %
• Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
• Controls: Attenuation, Mute, Mono
• Housing material: sheet steel/wood
• Housing surface: powder-coated
• Width: 164 mm
• Height: 62 mm
• Depth: 85 mm