Content |
WHARFEDALE Blutooth Active Speaker 2x15 Watt
DS-2 stereo Bluetooth speaker system delivers hi-fi sound in miniaturised form – perfect to place on a desk, table or shelf
Based on the now-discontinued DS-1, a similarly diminutive pair of Bluetooth speakers widely acknowledged as the best available under £200 – "petite little desktop speakers that sound fantastic for the money,” said What Hi-Fi? whilst presenting them with an Award in 2015.
In contrast to most Bluetooth speakers, the DS-2 is a pair of proper two-way hi-fi speakers shrunk to desktop size, standing just 190mm high, 120mm wide and 140mm deep.
The mid/bass driver’s cone is fashioned from woven polypropylene, chosen for its ideal combination of lightness, strength and low coloration. Both drive units are protected by specially designed metal grilles, while a rear-firing port augments low-frequency performance to provide bass that’s surprisingly deep and punchy for the speakers’ size. Inside the master speaker nestles new-generation, high-performance digital amplification outputting 2x15W continuous and 2x30W peak. This drives the treble and mid/bass units via a high-quality crossover network containing select audio-grade. Bluetooth provides simple wireless pairing with smartphones, tablets, PCs and Macs, complete with support for the sonically superior aptX codec. Flexibility is further enhanced by a 3.5mm analogue stereo input and supplied cable. |
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31KHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28KHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 88 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories (comes with) included wall mount bracket
ALSO AVAILABLE IS WHITE COLOR
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 60 - 120 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 362 x 210 x 303 mm (14 3/8 x 8 1/4 x 11 15/16 inch) Weight (each) Excluding stands: 9.9 Kg (21.75 lbs) AVAILABLE IN SIX COLOR FINISHES
| Frequency Response +/- 3dB: 60 Hz - 35 KHz
Sensitivity (1W@1M): 87 dB
Driver Compliment: 1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance: 8 ohms
Maximum SPL (each): 110.8 dBA
Recommended Amplifier Requirements (RMS): 25 - 100W
Bass Alignment: Front ported - bass reflex. HiVE®II port system
Power Handling (RMS): 100W
Crossover Frequency: 3.0kHz
External Dimensions:
(H x W x D) 250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual): 3.95 kg (8 3/4 lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Reviews
There are no reviews yet.