| Content |
| General Description |
2-way centre speaker |
| Enclosure Type |
bass reflex |
| Transducer Complement |
2-way |
| Bass Driver |
5“(130mm)
Black woven Kevlar cone x 2 |
| Full Range Driver |
1“(25mm) soft dome |
| Sensitivity (2.83v @ 1m) |
89dB |
| Peak Power Handling |
25-120W |
| Peak SPL |
95dB |
| Nominal Impedance |
4Ω (compatible 8Ω ) |
| Minimum Impedance |
3.8Ω |
| Frequency Response (+/-3dB) |
65Hz ~ 20kHz |
| Bass Extension (-6dB) |
55Hz |
| Crossover Frequency |
2.5kHz |
| Dimensions ( H x W x D ) |
(180+10) x 510 x (200+32)mm |
| Net Weight |
8.0kg/pcs |
|
Tweeter 1¨Silk Dome Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance Bi-Laminatex2
Frequency Response 48Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-150 W/Channel
Sensitivity 91dB
Dimensions (cm) 20.32 x 55.88 x 22.86 |
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 111.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: 2.8 kHz
Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands: 6 Kg (13.25 lbs)
|
HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.
MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
LF unit
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
Power Handling 150W max
Frequency response +/-6db 55Hz to 23kHz
Sensitivity 90 db/W
Impedance 8 ohms
Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.
Terminals Gold-plated 2-way binding posts.
Weight
(excl. packaging) 8kg
Dimensions
Width 530mm
Height 170mm
Depth 196 mm
|
2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22
|
Reviews
There are no reviews yet.