WHARFEDALE Reva-3 Hχεία (Pair) Piano Black

The Reva-3 is the smaller of the two floorstanding speakers in the series, which can be used in audiophile stereo systems or part of a larger surround sound system too. It's slot-loading port technology means it can perform well even when placed close to the wall, and utilises Reva Series new proprietary Glass Fibre cone woofers.

Designed from the ground up to offer state-of-the-art tonal accuracy and musical detail, Wharfedale Reva has been born out of a combination of extensive research into unique driver and cabinet technology, combined with a passion for music.

From our proprietary glass fibre weave bass and mid range drivers to the 7 layer piano gloss lacquer finish, Reva Series is stunning inside and out and will bring excitement to your music collection and home cinema experience.

Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years

System Format:    3 Way
Frequency Response:    35 Hz - 60 kHz
Sensitivity (1W@1M):    89 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    114.5 dBA
Power Handling (RMS):    150 W
Recommended Amplifier Requirements (RMS):    100 - 150 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment:    2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands:    22.2 Kg (48.9 lbs)

Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years

Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers