Content | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
Power Supply |
AC 9V-500 mA 50/60 Hz |
Frequency |
2404-2476MHz |
Channel |
25 |
Modulation/Demodulation |
GFSK |
Receive Sensitivity (WDR 24) |
-84dBm (min.) |
Transmitted Power (WDT 24) |
6 dBm |
Output Level (WDR 24) |
+13dBu (BAL max.) |
Input Level (WDT 24) |
+5dBu (max.) |
Bandwidth |
>=1.8 MHz |
Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
S/N |
>80 dB |
Dynamic Range @ 1 kHz |
>90 dB |
Crosstalk @ 1kHz |
>90 dB |
THD |
|
|
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. |
Overview
Dial in YOUR mix exactly as YOU want it, in Real Time.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
Recommended for: Portable, Tour.
Features
- 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
- 16 Preset Locations for Mix & Configuration Recall
- LCD Display with 16 Channel Metering
- Built-In Lexicon© Reverb
- dbx PeakStopPlus™ Limiting
- Global High & Low EQ
- Global Master Level Control
- Global Stereo Width Control
- BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
- XLR & 1/4” Stereo or Mono Outputs
- 1/8” & 1/4” Headphone Outputs
- Setup Wizard for Easy Configuration
- Supports 48 kHz & 96 kHz Sampling Rates
- Channel Linking, Grouping, & Multi-Select Capabilities
- Supports up to 60 PMC16s on a Single BLU Link Ring
- Built-In Sturdy Mic Stand Mount
- USB Port for Firmware Updates
|
Wireless 5.8 GHz Stereo Receiver
- For wireless transmission of a stereo audio signal together with the
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
- Volume control
- Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
Reviews
There are no reviews yet.