Content |
While maintaining the great sound of the Concert Club series, the BR series provides cost-effective speakers in three configurations to match a wide range of applications. Inheriting the excellent portability and placement flexibility that characterized previous models in the series, and featuring the same tasteful design and powerful sound, the BR series is a great choice for bands, clubs, halls, rehearsal studios, retail or school events … anywhere you need great sound in a medium-scale application.
- Outstanding audio quality with titanium diaphragm HF drivers.
- An ideal match for the EMX series powered mixers and P series power amps.
- Design that carries on the simple sophistication of the Concert Club series.
- Speaker stand pole sockets on all models
Yamaha BR10 Specifications
- Woofer: 10"
- Tweeter (diaphragm): 1" titanium
- Frequency Response (-10dB): 65Hz-20kHz
- Power Handling (noise*/program/peak): 125/250/500 Watts
- Nominal Impedance: 8 ohms
- Nominal Dispersion: 90° H x 40° V C.D.
- Sensitivity (1W, 1m): 96dB
- Input Connectors: 2 x 1/4" Phone
- Dimensions (Approximate): 394x537x396
- Weight: 14.4 Kg.
* (EIA RS426)
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
- 38 Hz to 17 kHz frequency range
(-10 dB) - 250W pink noise, 500 watts continuous program power capacity
- 120 x 110 degree coverage horn
- 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
- 4 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 30-WH)
- Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
- Net Weight: 18.9 kg (42 lb)
|
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. | MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
Description - Superior, crystal clear, sound quality from a compact full range speaker cabinet.
- The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
- Remarkable low frequency reproduction for a small sized cabinet
- Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
- Perfect for portable use: DJ, hiring companies, …
- VIBE10 Mk2 and VIBE15-SUB Mk2 make a perfect couple for more demanding situations.
- Solid, high strength, MDF enclosure
- Scratch resistant polyurethane painting
- Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
- Strong M8 Rigging Points
- Built-in 35mm Speaker stand adapter
- High Power 10inch (25cm) Woofer
- High Power 1,5inch Titanium Driver
- 2 Neutrik Speakon® connectors
- Specially designed Glass fiber horn
- Built-in heavy duty carrying handles
- Heavy duty rubber feet
Technical Information - Power Capacity: 200Wrms (400Wpeak)
- Input impedance: 8Ω
- Input Sensitivity: 95dB 1W/1m
- Max. SPL: 120dB
- Frequency response: 65 - 20.000Hz
- Nominal dispersion: 100° x 70° (HxV)
- Dimensions: 330 x 510 x 302 mm
- Weight: 15kg
|
Reviews
There are no reviews yet.