Content |
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. |
Because the TOA T-650 speaker employs a horn for short distance coverage and a horn for long distance coverage, it ensures high intelligibility even in sports facilities or public halls where many reverberations are generated. The speaker is designed to be installed as a main speaker in small and intermediate indoor sports facilities, and its heavy-duty construction protects unit against impacts from balls and other objects.
Enclosure | Bass reflex type | Power Handling Capacity | Continuous pink noise: 120 W, Continuous program: 360 W | Rated Impedance | 8 Ω | Sound Pressure Level | 100 dB (1 W, 1 m) | Frequency Response | 80 - 20,000 Hz | Crossover Frequency | 1.2 kHz (passive network) | Speaker Component | Low frequency: 25 cm cone speaker × 2
High frequency: (for long-distance use) CD horn fitted with compression driver
(60 horizontal × 30 vertical)
(for short-distance use) CD horn fitted with compression driver
(90 horizontal × 40 vertical) | Input Terminal | 2-pole M5 screw terminal, distance between barriers: 12.2 mm | Finish | Enclosure: Coniferous plywood, black, semi-mat, urethane paint
Grille: Steel plate, black, semi-mat, acryl paint
Mounting bracket: Steel plate t3.2, black, semi-mat, acryl paint | Dimensions | 288 (W) × 827 (H) × 354 (D) mm | Weight | 22 kg (including mounting brackets) | Accessories | Speaker mounting bracket A,B ……1, Speaker mounting bolt ……8, Eyebolt ……1 | Option | Matching transformer: MT-S0601 |
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
2-Way, 10“
High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
Spec. | Enclosure | Sealed type | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | Rated Impedance | 8 ohms | Sound Pressure Level | 96dB (1W, 1m) | Frequency Response | 100 - 20,000Hz | Crossover Frequency | 2.5kHz (passive network) | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | Dimensions (W × H × D) | 460 × 310 × 200mm | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | |
- Equipped with: 2" tweeter and 10" woofer
- Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
- Rated power: 700 W (PGM)
- Biamp mode
- Setting for floor monitor
- Lightweight but durable wooden cabinet with high quality polyurea coating
- Stand flange mount for two angles
- Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
- Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
- Weight: 14.0 kg
|
Reviews
There are no reviews yet.