| Content |
- Simply add two speakers to make a wireless music system
- Use on its own or add to any other MusicCast enabled product to expand your multi-room system
- Powerful 70-watt amp can drive most speakers and it supports hi-res audio
- Easy installation - Suitable size for 1U rack with a width of 214 mm (8-3/8“) and height of 42 mm (1-5/8“) (without feet).
- 2 year warranty & 1.8w low standby power consumption
|
JTS PT950B-CM501 Wireless Microphone Set
JTS PT-950B
UHF PLL pocket transmitter with lavalier microphone
All instrument microphones of the CX serires as well as headband microphones and lavalier microphones of the CX
series or CM series can be operated via this stable pocket transmitter without interference. The PT-950B is supplied
with the high-quality lavalier microphone CM-501; its frequency response which has been optimised for speech
applications guarantees max. audibility. 193 frequencies with pilot tone technology offer highest flexibility and safe transmission.
The integrated LC display provides reliable information about battery status and transmitting frequency. Continuously adjustable
gain and lock function are indispensable features for professional applications.
Supplied with stable transport box.
Features:
Carrier frequency 790-814MHz
Audio frequency range 40-18,000Hz
Frequency stability ±0.005%
Transmitting power 10mW
Connections 4-pole mini XLR
Power supply 2 x batt. AA size, alkaline
Operating time > 30h
Dimensions 70x190x27mm (WxHxD)
Weight 160g
JTS CM501
Electret lavalier microphone
This microphone is cut out for presentations and discussions. It guarantees good audibility, a secure fit due to the supplied tie clip
and is quickly to install. The cartridge design of cardioid characteristic allows to pick up a precise voice of high quality over a wide dynamic range.
Supplied with windshield.
Features:
System electret/cardioid
Frequency range 100-15,000Hz
Impedance 2.2kΩ
Sensitivity 3.2mV/Pa/1kHz
Max. SPL 130dB
Power supply pocket transmitter
PT series or PS-500
Connections cable with 4-pole mini XLR
Weight 20g
|
The WM-5320H wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use.
Case
| Modulation | Frequency modulation | | Frequency Range | 636 - 865 MHz*, UHF | | Channel Selectable | 64 channels (the number of channels may differ from country to country) | | RF Carrier Power | 50 mW or less | | Tone Frequency | 32.768 kHz | | Oscillator | PLL synthesized | | Maximum Input Level | 120 dB SPL | | Battery | LR6 (AA) | | Battery Life | 10 hours or more (alkaline) | | Indicator | Power/Battery lamps | | Antenna | Built-in type | | Finish | Resin, coating | | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | | Weight | 90 g (with battery) |
Headset
| Microphone Element | Electret condenser microphone, cardioid | | Cable Length | 1.4 m | | Connector | φ3.5 plug (EIAJ RC701) | | Accessory | Screw driver ……1, Neck strap ……1 |
|---|
|
Connections
| REAR:
Aux in (via 2 x RCA/phono)
Aux out (via 2 x RCA/phono)
Stereo pre-out (via 2 x RCA/phono)
Subwoofer pre-out (via RCA/phono)
Digital optical audio in (via toslink)
Digital optical audio out (via toslink)
Coaxial digital audio out (via RCA/phono)
USB socket
Wireless antenna socket
Network socket (via RJ45)
Remote in
Trigger in & out
OTHER:
Wireless networking
Bluetooth connection
Apple Airplay
MusicCast
DLNA certified | | DAC/Digital bits | Up to 192kHz/24 bit | | Extra | Bluetooth connection.
Apple AirPlay.
DLNA certified for network connection. | | Networking | Wired or wireless networking | | Supplied accessories | Remote control, stand | | Tuner | Internet radio tuning. | | W x H x D (mm) | 215 x 51.5 x 245.9 (214 x 123.6 x 245.9 with antenna) | | Weight (kg) | 1.44 |
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V | Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | | Power Consumption | 15 W or less | | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | | Tone Squelch Frequency | 32.768 kHz | | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | | Frequency Response | 100 Hz - 12 kHz | | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Case: ABS resin, black | | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | | Weight | 630 g (1.39 lb) (unit only) | | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
Reviews
There are no reviews yet.