| Content | This subwoofer incorporates a number of Yamaha’s advanced and a high performance bass technologies such as Twisted Flare Port and Advanced YST II with discrete amp circuitry and high quality 10" woofer unit
This subwoofer incorporates a number of Yamaha’s advanced and a high performance bass technologies such as Twisted Flare Port and Advanced YST II (Yamaha Active Servo Technology II) with discrete amp circuitry and high quality 25 cm (10”) woofer unit. This results in sensational bass response that adds significantly to overall listening enjoyment of music and movies.
The black NS-SW100 from Yamaha is a powered 10" subwoofer designed to provide rich and impactful bass response, making it well suited for home theaters, game setups, and music reproduction. The NS-SW100 utilizes a twisted flare port, which reduces air turbulence noise when compared to a conventional port, resulting in clear and accurate low frequency reproduction.
The inclusion of Advanced Yamaha Active Servo Technology II (Advanced YST) allows the speaker and amplifier to work together to cancel out impedance so the speaker unit maintains linear motion and ensures the highest levels of sound pressure and overall performance. The rear panel offers a single RCA input, power switch, and volume control.
- New Twisted Flare Port contributes to clear and tight bass
- Advanced YST II (Yamaha Active Servo Technology II)
- 25 cm (10”) cone woofer
- Stylish addition to any room
| Subwoofer Type |
Active |
| Enclosure Type |
Bass-Reflex |
| Amplifier Power Rating |
100 W Peak
50 W |
| Drivers |
10" / 25.4 cm (Front-Firing) |
| Ports |
1 |
| Frequency Response |
25 to 180 Hz |
| Impedance |
5 Ohms |
| Magnetic Shielding |
None |
| Connectivity |
1 x RCA Input (Audio) |
| Phase Adjustment |
None |
Power
| AC Input Power |
120 VAC, 60 Hz |
| Power Consumption |
40 W |
Physical
| Placement & Mounting Options |
Floorstanding |
| Dimensions |
13.8 x 13.9 x 16.1" / 351 x 352 x 408 mm |
| Weight |
26.5 lb / 12.0 kg |
|
With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.
Features
Compact, stylish cabinet; high-value subwoofer
6.5" active and 8" passive andonized aluminum woofers
High quality, long throw drivers
2" copper-wound voice coil for exceptional reliability
Down-firing bass radiator for more output, less distortion
"Green” MDP amp rated at 300 watts Dynamic power
User's Manual Specifications
| Amplifier Output: 500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit 40 - 120Hz Variable
Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification: Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification: Class-D amplifier
Driver Compliment: 1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D) 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked) 22.56Kg (49.63lbs)
Mains Input Voltage: 100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance 20Kohms
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
AVAILABLE IN SIX COLOR FINISHES
![colors_01]( "colors_01")
|
The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality
Features
Rigid MDF cabinet
70W RMS amplifier
8-inch long-throw woofer
Individual controls to tailor volume, crossover frequency and phase adjustment
Sensitivity 180mV for full power output
Frequency response 34Hz - 150Hz
Rated output power 70W
Drive units 1 x 8" (203mm) long throw woofer
Crossover 50 - 150Hz continuous/active
Max. power consumption 100W
Colour Black
Dimensions (WxHxD) 300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight 7.7kg (17lbs) | Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Reviews
There are no reviews yet.