YAMAHA NS-SW300 ACTIVE SUBWOOFER 10” 250W

Subwoofer
Driver     25 cm (10”) cone
Output Power     250 W
Frequency Response     20–160 Hz
Advanced YST     Yes
High-Efficiency Power Amplifier     Yes
Twisted Flare Port     Yes
BASS (Bass Action Selector System)     Yes
Auto Standby     Yes
Standby Power Consumption     0.3 W
System Connector     Yes
Dimensions (W x H x D)     350 x 366 x 420 mm; 13-3/4” x 14-3/8” x 16-1/2”
Weight     18 kg; 39.7 lbs.

Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES