Zero88 Rack 6-Schuko 6 Channels Digital Switcher

939.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Zero88 Rack 6-Schuko 6 Channels Digital Switcher Cost effective 19″ dimmer The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers […]

 

Read more

Zero88 Rack 6-Schuko 6 Channels Digital Switcher

Cost effective 19″ dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.

The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19″
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions – 88mm x 483mm x 360mm
  • Weight – 8.0kg
Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “Zero88 Rack 6-Schuko 6 Channels Digital Switcher”

Your email address will not be published. Required fields are marked *

Quick Comparison

Zero88 Rack 6-Schuko 6 Channels Digital Switcher removeWORK PD 81S-1 ΜULTICONNECTOR INPUT-8 SCHUCKO OUTPUTS removeAdam Hall 87480 19" Mains Power Distributor Strip, 2 U, 9 Sockets removeZero88 Switch 6 Socapex DMX 6 Channels Digital Switcher removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out remove
NameZero88 Rack 6-Schuko 6 Channels Digital Switcher removeWORK PD 81S-1 ΜULTICONNECTOR INPUT-8 SCHUCKO OUTPUTS removeAdam Hall 87480 19" Mains Power Distributor Strip, 2 U, 9 Sockets removeZero88 Switch 6 Socapex DMX 6 Channels Digital Switcher removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out remove
ImageSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out
SKURACK6SCHUKOPD 81S87480SWITCH6SOCAPD190850294
Rating
Price 939.00 incl. GR VAT 156.24 incl. GR VAT 482.77 incl. GR VAT 1,262.75 incl. GR VAT 173.59 incl. GR VAT 97.95 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

Only 3 left in stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockOnly 3 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description• Manufacturer: Showtec • Connecting plug: CEE 16A • Output: Schuko • Number of Channels: 3 • Number of Schuko Outputs: 6
Content

Zero88 Rack 6-Schuko 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg

1 multiconnector input 8 schucko outputs

Specifications:
Power Input  AC 230V~50/60Hz
Input Connector 16 pin ILME male multiconnector
Power Outlet  8xSchuko, 16A
Dimensions   345x150x102mm
Weight          3.2Kg

  These power distributors are cost-optimised powerhouses. Designed for everyday stage use, they provide a basic supply of conventional electricity requirements. The components have been selected based upon their fulfilment of the relevant safety requirements and a favourable price/performance ratio.
  • 3 x indicator lamps for phase control L1, L2, L3
  • Input via 32 A CEE panel mounted receptacles 5-pin red
  • Output parallel to input 32 A CEE socket 5-pin red
  • Protection via 3 x C16 circuit breakers
  • Front output via 3 x panel mounted receptacles with hinged lids grey
  • Rear output via 6 x panel mounted receptacles with hinged lids grey
  • Quality Made in Germany
Product type
19" rack mains socket strips
Type
19" / 2 U
Number of outlets (Earthing contact / IEC 7/4)
9 (3 x front, 3 x 2 rear)
Power input
32 A CEE 5-pole panel socket, red
Output parallel to input
32 A CEE 5-pole panel plug, red
Operating voltage
400 V
Max. current
3 x 16 A
Fuse
3 x C16 circuit breaker (C tripping characteristic : for higher switch-on power)
Cabinet material
Metal
Color
blue
Width
485 mm
Height
88 mm
Depth
70 mm
Other features
indicator lamp pro phase
Weight
3,06 kg
 

Zero88 Switch 6 Socapex DMX 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg
PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.   240 Volt 8 IEC OutputsBreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out Powersplitter from CEE 16A 5 pole three phase to 6 schuko outputs (2 per phase). Also equipped with a CEE 16A 5 pole three phase for linking multiple splitters together. Compact design. Sliding profile for easy mounting of clamps and safety-eyes.
Weight8.00 kg3.20 kg3.00 kg8.00 kg5.00 kg0.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 3.20 kg
Weight 3.00 kg
Weight 8.00 kg
Weight 5.00 kg
Weight 0.90 kg