ARTSOUND A8862 ΥΠΕΡΥΘΡΟ ΘΕΡΜΟΜΕΤΡΟ LASERGRIP THERMOMETER

ARTSOUND A8862 ΥΠΕΡΥΘΡΟ ΘΕΡΜΟΜΕΤΡΟ LASERGRIP THERMOMETER

ΕΥΡΟΣ ΘΕΡΜΟΚΡΑΣΙΑΣ: -32 C - 550 C
AKΡΙΒΕΙΑ : 1,5%
ANAΛΥΣΗ :  0,1 C
ΧΡΟΝΟΣ ΑΠΟΚΡΙΣΗΣ : 0,5sec
ΒΑΡΟΣ  : 258gr
ΤΡΟΦΟΔΟΣΙΑ : 9V

Minilyzer ML1 is the state-of-the-art analog audio meter that fits
into the palm of your hand.
It provides you with a comprehensive set of functions essential
for the analysis of professional audio systems.The powerful Minilyzer
continuously measures the audio signal and displays the desired
results with all complementary information on an illuminated hi-res
graphical LC-Display.
The Minilyzer and the MiniSPL form a comprehensive integrating
sound level meter.
MiniLINK, the USB interface for the Minilyzer allows documentation
and data acquisition of all ML1 functions in conjunction with the easy
to use MiniLINK PC application. MiniLINK supports online data logging
up to several days.
Product-details

Measurement functions:
Level RMS, Relative
Sound Pressure Level
Distortion Analyzer (THD+N), k2 - k5 harmonics
VU & PPM Meter
Speaker Polarity Test(for all speaker types)
Signal Balance Error
Frequency-/Time-Sweep Recording
1/3rd Octave Spectrum RMS & SPL
Scope

Cable Tester ACT-100

The Alphaton active remote cable tester can be used for testing either normal short
cables or long ones, especially mufticores, wkh connectors not being accessible at
one time. The tester is especially suded for fixed installations where cables can not
be tested with a standard type cable tester or Ohm meter. Either symmetric and
unsymmetric cables can be tested.
“Cold" solderings and junction resistances are displayed by color or luminosity changes
in three color LED Display. The imprinted fault table incorporates alt important fault
conditions, indeed not all possible ones due to their reiatively large number. In case the
display is in a state which cannot be found on the imprinted table, it can be looked up in
the user's manual. In any case, however, the cabie is in aquite unusable state and should
be repaired or replaced.The Alphaton cable tester has a SEND and a REMOTE section.
The REMOTE sectionconsistsof two recessed mounted XLR type male or female connector
and a stereo phone jack at the right hand side of the tester. Additionally, a separate REMOTE
plug is delivered togetherwith the active remote cable tester for testing long cables in fixed
installations.

DIGILYZER  Φορητό όργανο έλεγχου ψηφιακών συστημάτων
 
Audio/Video related, condumer/professional 8-16BIT, συχνότητα δειγματοληψία
32-96 kHz, είσοδοι AES-3/SPDIF/TOS LINK/ADAT INTERFACE. Απεικόνηση
μετρήσεων σε μεγάλη LCD οθόνη, ενσωματωμένο ηχείο, έξοδος ακουστικών,
λειτουργεί με 3 ΑΑΑ μπαταρίες (+DC IN) βάρος 300gr. Εκτελεί μετρήσεις LEVEL
-FS/LEVEL RMS/SIGNAL, FREQ/THD+N/FREQ. SWEEP/PPM/SCOPE/CRC/
OVERLOAD DETECTION/FULL SCALE DETECTION. Επίσης SAMPLING FREQ
/CARRIER LEVEL/CHANELL STATUS κ.α.

• Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
• Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
• Super-easy operation with intuitive LED display
• Continuity check and intermittent contact detection

• Phantom-power and ground-shield check
• Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operates with 2 AA size batteries (not included)
• Designed and engineered in Germany

Tester καλωδιώσεων με αυτόματη ένδειξη οχτώ σημείων, σασσί δύο τμημάτων για έλεγχο δομημένης καλωδίωσης γεννήτρια θορύβου, tester με beeper και led ενδεικτικό με την χρήση banana connectors, ελέγχει DMX (5-pin), BNC RCA, XLR (αρσενικό /θηλυκό) 3 επαφών, MIDI (5-pin DIN), speakon 4 επαφών, 1/4? (6.3mm) TRS/TS, RJ45, 1/8" (3.5mm) TRS/TS.

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

• Tests up to 8-pin cables
• 2 piece chassis for testing installed cables
• Test Tone Generator
• Allows connection between different format connectors with ease
• ʽBananaʼ connector continuity tester with beeper and LED indicator
• Super-rugged construction for durability and longer life
• (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
• (2) BNC connectors for testing of 2 pin->to pin connections
• (2) RCA Phono connectors for testing of 2 pin->to pin connections
• (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
• (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
• (2) Speaker Twist connectors for testing of 4 pin->to pin connections
• (2) Banana connectors for testing of 1 pin->to pin connections
• (2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
• (2) RJ45 connectors for testing of 8P8C modular connections
• (2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections