Content | Ψηφιακός επεξεργαστής ηχείων 2 in 6 out. Crossover 2x3, 2x4, 2x5 και 2x6 διαμορφώσεις, Είσοδο RTA για μικρόφωνο μετρήσεων, δυνατότητα "κουρδίσματος" της αίθουσας χωρίς την χρήση pink μέσω του Auto EQ εφαρμογής με 28 περιοχές γραφικού equalizer. Νέας σχεδίασης AFS (περιοριστής μικροφωνισμών) με 12 notch φίλτρα, Sub Harmonic Synthesizer, dual stereo equalizer 28 περιοχών linked ή dual mono, stereo 8 περιοχών παραμετρικό equalizer στην είσοδο αλλά και στην έξοδο. Limiter στην έξοδο για προστασία των ηχείων, delay για ευθυγράμμιση των δρόμων των ηχείων (aligment delay). Δυνατότητα απομακρυσμένου ελέγχου μέσω ασύρματου δικτύου via Android, iOS, MAC, Windows συσκευές. 24BIT A/D-D/A/113dB δυναμική περιοχή, οθόνη ενδείξεων LCD με 25 user μνήμες/25 factory preset, έτοιμοι συνδυασμοί ηχείων και ενισχυτών από πληθώρα κατασκευαστών, Led Bar ενδείξεις στο μπροστινό panel με ξεχωριστά mute κουμπιά για κάθε δρόμο, είσοδο USB για σύνδεση με υπολογιστή. Όλοι οι είσοδοι και έξοδοι είναι με βύσματα τύπου XLR.
Input |
(2) line inputs. (1) RTA Mic input |
Input Connectors |
(2) Female XLR line inputs. (1) Female XLR RTA Mic input |
Input Type |
Electronically balanced/RF filtered |
Input Impedance |
>50 kohm |
A/D Converter |
dbx Type IVTM Conversion System |
CMRR |
> 45dB |
Mic Preamp Phantom Power |
+15VDC (RTA) |
Mic Preamp Equivalent Input Noise (EIN) |
|
Output |
(6) Line Outputs |
Output Connectors |
Male XLR |
Output Type |
Electronically balanced, RF filtered |
Output Impedance |
120 Ω |
Max Output |
+20dBu |
A/D Dynamic Range |
112 dB A-weighted, 110 dB unweighted |
Type IV Dynamic Range |
123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW |
Input Delay Length |
100ms |
Alignment Delay |
10ms per channel (60ms total) |
Sample Rate |
48kHz |
Dynamic Range |
>110 dB A-weighted, >107dB unweighted |
THD+Noise |
0.003% typical at +4dBu, 1kHz, 0dB input gain |
Frequency Response |
20Hz - 20kHz, +/- 0.5dB |
Interchannel Crosstalk |
|
Operating Voltage |
100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz |
Power Consumption |
22 W |
Unit Weight |
5.25 lbs. (2.4 kg) |
Shipping Weight |
6.75 lbs. (3.1 kg) |
Dimensions |
1.75" (H) x 5.75" (D) x 19" (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W) |
D/A Dynamic Range |
112 dB A-weighted, 110dB unweighted |
|
Advanced Feedback Suppression® Processor with Full LCD Display
Hear No Evil and See no Evil.
The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.
With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®
Features
- Wizard Setup Function
- Full LCD Display
- dbxʼs patented (Advanced Feedback Suppression) AFS™ technology
- 24 Programmable Filters per Channel
- Stereo or Dual Independent Channel Processing
- Live and Fixed Filter Modes
- Selectable Filter Lift Times
- Application-specific filter types include: Speech and Music Low, Med and High
- Input channel Metering
- 24 LED per Channel Filter Metering
- XLR and TRS Inputs and Outputs
Specifications
Number of Inputs
|
2
|
Input Connectors
|
Female XLR and 1/4” TRS
|
Input Type
|
Electronically balanced/unbalanced, RF filtered
|
Input Impedance
|
Balanced 50kΩ, Unbalanced 25kΩ
|
Max input line level
|
+20 dBu
|
CMRR
|
> 40dB, typically >55dB @ 1kHz
|
Number of Outputs
|
2
|
Output Connectors
|
Male XLR and 1/4” TRS
|
Output Type
|
Electronically balanced/unbalanced, RF filtered
|
Output Impedance
|
Balanced >120 Ω, Unbalanced >60 Ω
|
Max Output Level
|
+20 dBu
|
A/D Converter
|
dbx Type IV™ Conversion System
|
A/D Dynamic Range
|
>113 dB A-weighted, >110 dB unweighted, 22kHz BW
|
Type IV Dynamic Range
|
>119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW
|
A/D Conversion
|
24-bit
|
Sample Rate
|
48kHz
|
D/A Dynamic Range
|
112 dB A-weighted, 109 dB unweighted
|
D/A Conversion
|
24-bit
|
Dynamic Range
|
109 dB A-weighted, 106 dB unweighted, 22kHz BW
|
THD+Noise
|
0.003% typical at +4 dBu, 1 kHz
|
Frequency Response
|
20Hz – 20kHz, +/- 0.5dB
|
Interchannel Crosstalk
|
>80 dB typical
|
Crosstalk input to output
|
>80 dB
|
Operating Voltage
|
100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
|
Power Consumption
|
9 W
|
Unit Weight
|
4.5 lbs. (2.04 kg)
|
Dimensions
|
1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
|
|
The ARX EC-2 is a flexible yet affordable 24 dB per octave Phase Correct active crossovers. It has 2 modes of operation; as either Stereo 2 way or a Mono 3 way units, with a switch on the back panel selecting either mode.
Features Ultra low noise circuitry Totally phase aligned at crossover point Switchable Dual Channel 2 way or Single Channel 3 way Unique 'semi-fixed' crossover point 24dB per octave (Fourth Order) Linkwitz-Riley filters Separate Summed Mono Output Balanced Inputs and Outputs Built in High Pass filters Intuitive, 'user friendly' layout Flawless performance in any audio environment
Tamper-Proof Crossover Points The crossover points are determined internally by the value of 4 resistors per channel; changing the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of externally adjusted crossover points, making the crossover points tamper-proof once they are set. Idle fingers can't fiddle with the crossover points and create havoc with the system! As a handy guide, a list of common crossover points and their corresponding resistor values are printed inside the unit's lid, and also set out in the Owner's Manual. On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid and High in single channel 3 way mode, with corresponding Outputs on the rear panel.
Balanced Inputs and Outputs EC-2 has Balanced Inputs and Outputs, on XLR connectors. The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low feed (e.g. Left and Right full-range plus a single Sub Bass speaker). High Pass Filter There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers and waste amplifier power. In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of differing sensitivities. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage change switch. Uncompromising Audio Quality Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels. It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the crossover region. From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX EC-2 is a crossover that is suited to any application that requires flawless, transparent sound. You'll never compromise on Quality when you choose ARX
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 21 dB CMRR >45 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 21dB Frequency Response 30Hz-20KHz +or- 0.5dB Note: 30 Hz is a function of the High Pass filter Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted Distortion 004% THD,0dB,1KHz Dynamic Range 111 dB Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm Input Connector type XLR Output Connector type XLR Crossover point frequencies are changed internally by varying the value of 4 resistors per channel.
Front Panel Controls Low and High Output controls for 2 way mode Low, Mid and High Output controls for 3 way mode Marker panels for labelling crossover assigns 2 way/ 3 way status LEDs Rear Panel Balanced XLR Inputs and Outputs Additional summed mono Low output 2 way / 3 way mode switch | Crossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kg |
Ψηφιακός επεξεργαστής ηχείων 3 IN x 6 OUT. Με νέο AutoEQ σύστημα αλγόριθμων. Διαθέτει είσοδο RTA για μικρόφωνο μετρήσεων, αντί ?μικροφωνικό σύστημα AFS, ισοσταθμιστή 31 περιοχών, παραμετρικό EQ 12 περιοχών (8 AutoEQs - 4 UserEQs), γεννήτρια υπό -αρμονικών χαμηλών συχνοτήτων, backline delay, Noise Gate, XLR είσοδοι - έξοδοι, 2 AES ψηφιακές είσοδοι (στις αναλογικές εισόδους 1&2), 6 έξοδοι μονοφωνικών ζωνών crossover, 8 περιοχών παραμετρικό EQ για κούρδισμα των ηχείων, θύρα Ethernet, USB, ασύρματη σύνδεση συμβατό με Android, iOS, Mac, Windows. |
Ψηφιακός επεξεργαστής ηχείων, 24 bit Delta-Sigma AD/DA, 2 in 6 out, με διάφορους τύπους φίλτρων, παραμετρικά EQ, delays, δυναμικούς επεξεργαστές. Ψηφιακή είσοδο AES/EBU (2 Ch.), USB θύρα επικοινωνίας με υπολογιστή.
Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.
A/D Conversion 24-Bit Delta-Sigma A/D Conversion 24-bit/sigma-delta (linear phase) 128 times oversampling Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced) Analog Outputs 6 XLR (Electronically Balanced) Control Protocol Front Panel USB Connector D/A Conversion 24-bit/sigma-delta 128 times oversampling D/A Conversion 24-Bit Delta-Sigma Data Format 24-Bit Digital Inputs 1 XLR AES/EBU (2 Ch) Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz) Electronics Type Processor FIR-Drive No Frequency Response 10 Hz - 22 kHz (±0.5 dB) Input Impedance (Balanced) 10 kΩ Internal Processing 32-Bit Floating Point Mains Voltage 100-240 VAC Maximum Input Voltage 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged) Maximum Output Voltage 8.7 V / +21 dBu Nominal Input Voltage 1.23 V / +4 dBu Nominal Output Voltage 1.23 V / +4 dBu Output Impedance (Balanced) 50 Ω Power Consumption 25 W Sample Rate 48 kHz THD+N < 0.01% (band limited 22 Hz - 22 kHz) Height 1RU 44.45 mm (1.75“) Width 482.6 mm (19“) Depth 355.6 mm (14“) Weight Net 4.6 kg (10.14 lbs) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.