DOD 2×15 Equalizer -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ-

53%
Όλα τα προϊόντα με DOD

Original price was: €210.80.Current price is: €99.20. με ΦΠΑ 24%

Μόνο 1 απομένουν σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων €
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο Διαθέσιμο Κωδικός προϊόντος: DOD 2x15 Κατηγορία:
Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ Φ.Π.Α. 23%    

 

Διαβάστε περισσότερα

Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ Φ.Π.Α. 23%

 

 

Βάρος 8.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DOD 2×15 Equalizer -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ-”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

DOD 2x15 Equalizer -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeOutline FSC1 Formula Stack Controller -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeAKG N63E Phantom Power Supply ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ removeBSS AUDIO FCS-966 Opal Constant Q Γραφικός Ισσοσταθμιστής-Used- removePeavey EQ-215 Stereo Equalizer Vintage -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- remove
NameDOD 2x15 Equalizer -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeOutline FSC1 Formula Stack Controller -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeAKG N63E Phantom Power Supply ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ removeBSS AUDIO FCS-966 Opal Constant Q Γραφικός Ισσοσταθμιστής-Used- removePeavey EQ-215 Stereo Equalizer Vintage -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ- remove
Image
SKUDOD 2x15FSC1N63EFCS966SHEQ215SHFDS-334
Rating
Price Original price was: €210.80.Current price is: €99.20. με ΦΠΑ 24% Original price was: €2,500.00.Current price is: €550.00.€80.00 Original price was: €558.00.Current price is: €285.00.€140.00 Original price was: €499.00.Current price is: €480.00.
Stock

Μόνο 1 απομένουν σε απόθεμα

Μόνο 2 απομένουν σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα

Μόνο 2 απομένουν σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα

AvailabilityΜόνο 1 απομένουν σε απόθεμαΜόνο 2 απομένουν σε απόθεμαΜόνο 1 απομένουν σε απόθεμαΜόνο 2 απομένουν σε απόθεμαΜόνο 1 απομένουν σε απόθεμαΜόνο 1 απομένουν σε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ Φ.Π.Α. 23%    

Outline FSC1 Processor-2nd Hand- FEATURING Customized functions FOC1 dedicated controller for Flyone loudspeaker system SC1 dedicated controller for Spectra loudspeaker system NC1 dedicated controller for Integra loudspeaker system MEC1 dedicated controller for Media loudspeaker system FSC1 dedicated controller for Formula Stack louds. System TFC1 dedicated controller tor Topfly loudspeaker system MRC1 dedicated controller for Road loudspeaker system TLC1 : dedicated controller for Tripla loudspeaker system Dynamically invariant filter transfer function RMS limiters on each output Subwoofer dedicated output Adjustable band gain Polarity inversion switches Muting switches   DESCRIPTION Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive. Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best. The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system. The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system. All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed. All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output. All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units. All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included. Dimensions of all models are 483mm width, 44mm height, 210mm depth. SPECIFICATIONS Product name: Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1 Product type: Dedicated active controller Channels: 1 Ways: FOCI: 2 ways + subwoofer SC1: 2 ways + subwoofer NCI: 2 ways + subwoofer MEC1 : 2 ways + subwoofer FSC1: 3 ways + subwoofer TFC1: 3 ways + subwoofer MRC1: 3 ways + subwoofer TLC1: 3 ways + subwoofer Crossover frequencies: fixed customized Filter slope: fixed customized Filter transfer function: fixed customized Input impedance: 20 kΩ balanced Frequency response: 20-20000 Hz ± 0.3 dB Output impedance: 600Ω balanced Total harmonic distortion (THD): <0.01% Total intermodulation distortion (SMPTE): <0.01% Signal to noise ratio: > 100dBA Subsonic filter: Butterworth 18 Hz, 18 dB octave Controls: Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust Rear panel switches: Balanced/unbalanced input and outputs, limiters on Display: Front panel: Power on, signal present, limiting action, input overloading Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold Power supply: AC from 100 -to 240V/50-60 Hz Power consumption: 20W Dimensions and net weight: Front panel Standard EIA 19" 1 U 483mm width, 44mm height, 210 mm depth, all models 3.3 net weight. Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.  

Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ ΦΠΑ

AKG N63E Phantom Power Supply

 Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ Φ.Π.Α. BSS Opal FCS-966 Constant Q Graphic Eq Graphic equalisers are found in just about every sound application, from room contouring to feedback control and general audio sweetening. Traditionally, much general eq'ing takes place on the faders alone, but this restricts the use of the faders at each end of the scale for further precision eq work. So we provided the Opal FCS-966 with separate LF and HF contour filters which can change an overall sound balance without disturbing a detailed room or loudspeaker response. These filters are very musical gentle boost and cut shelving filters which can be used to add (or remove) room effects that change with temperature, audience numbers or humidity. All these effects can be easily made without disturbing the critical fader settings already made. Constant Q Filters The modern generation of graphic eq's uses the Constant Q topology, pioneered by BSS Audio, which means that the filter width is constant whatever the fader gain setting. Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting eq curve more closely resembles the actual fader positions. More Gain Control Per Filter Each eq fader has +/-15dB of adjustable gain, more than many competitive graphic eq's. The faders are long-throw 45mm types for precision control. High Pass Filter Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals e.g. from vocal-only wedges. Metering BSS Audio believes in providing engineers with information, and the FCS-966's 8-segment led meter shows output level and warns of signal clipping within the eq. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalised signals using the gain control. Centre Bypass When any eq fader is in its centre detent position, the filter is automatically bypassed, for optimum performance. Input/Outputs All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, we've provided three differerent interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals. Relay Bypass The EQ IN buttons switch the EQ path into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors. Control Descriptions Faders 30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders. HP Filter Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz. LF Contour Smooth shelving filter, +/-6dB of gain at 50Hz HF Contour Smooth shelving filter, +/-6dB of gain at 14kHz. GAIN Used for overall unity gain adjustment. Adjustable from - infinity to +10dB. CLIP Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points. LED Meter Shows output signal level (input signal when eq is bypassed) from -24dBu to +18dBu in 8 steps.

Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ ΦΠΑ

Peavey EQ-215 Stereo Equalizer Vintage (Μεταχειρισμένο)

  • Στερεοφωνικό equalizer 15 περιχών
  • Μέτρια εξωτερική κατάσταση (γραντζουνιές,λείπει ένα κουμπί από ένα fader)
  • Λειτουργεί άψογα
  • Made in U.S.A.
  • Τιμή χωρίς Φ.Π.Α.

 

Η ΤΙΜΗ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΙ Φ.Π.Α.

FDS-334 MINIDRIVE   
Ψηφιακό σύστημα διαχείρισης ηχείων, 2 εισόδων, 4 εξόδων.

The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.

 

Weight8.00 kg7.00 kg2.00 kg3.00 kg2.00 kg3.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 8.00 kg
Βάρος 7.00 kg
Βάρος 2.00 kg
Βάρος 3.00 kg
Βάρος 2.00 kg
Βάρος 3.00 kg

Σχετικά προϊόντα

Πρόσφατη Εμφάνιση Προϊόντων