DRAWMER DA6 – Balanced Distribution Amplifier

The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.

The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.

The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.

The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.

• 1x6 Stereo Distribution Amp with Monitoring.
• 1 set of stereo (2) XLR inputs.
• 6 sets of stereo (2) XLR outputs.
• Input stage has LED level meter.
• Each output channel can be switched to mono.
• Each output channel can be individually monitored.
• Built-in headphone amp.
• Optional transformer balanced outputs.
• Electronically balanced inputs with individual left/right level controls.
• LED metering on input for balancing stereo material or two mono signals.
• Left / Right level controls on each output with a stereo / mono switch.
• Headphone jack to monitor output of selected channel.
• LED metering on output of selected channel.
• Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
• 1 unit rack space.
• Inputs and Outputs are balanced XLRs at +4dBu.

Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.

• Each channel: Input: female XLR type
• Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
• Nominal impedance for inputs/outputs: 200
• Max. input level: + 6 dBu

• Με βελτιωμένο ρυθμό δειγματοληψίας 192 kHz για την καλύτερη αναπαραγωγή ήχου.
• Υποστηρίζει ασυμπίεστα σήματα ήχου 2 καναλιών LPCM (γραμμική διαμόρφωση παλμικού κώδικα).
• Υποστηρίζει συμπιεσμένα 2κάναλα και πολυκάναλα ηχητικά σήματα Dolby Digital και DTS.
• Ιδανικό για παρουσίαση ή διανομή σε άλλο δωμάτιο.
• Ο οπτικός (Toslink) διαχωριστής ψηφιακού ήχου μπορεί να διαχωρίσει μια ενιαία οπτική ψηφιακή είσοδο σε τέσσερις εξόδους χωρίς καθυστέρηση ή απώλεια ποιότητας.
• Υποστηρίζει τα πρότυπα S/PDIF και Toslink.

Practical distributor with 1 input and 6 outputs

• Extends every mixer with additional outputs
• 1 stereo XLR input
• 6 stereo zone outputs (XLR)
• Each zone with level control and mono switch
• LED display of signal input and mono/stereo mode
• Rack installation with 1 U
• (19") 48.3 cm rack installation 1 U

Διανομέας ήχου 2 εισόδων και 4 εξόδων με δυνατότητα διπλής λειτουργίας. α) 1 είσοδος - 8 έξοδοι ή β) 2 είσοδοι - 4 x 2 έξοδοι.
Δέχεται σήματα mono ή stereo και η στάθμη εξόδου μπορεί να ελέγχεται ανεξάρτητα σε κάθε έξοδο μέσω περιστροφικού ποτενσιόμετρου. Διαθέτει LED VU meters για την απεικόνιση της στάθμης του σήματος εισόδου και ανεξάρτητα ρυθμιστικά για κάθε κανάλι. Είσοδοι και έξοδοι σε XLR balanced.

This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.

WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.

Audio signal distributor with 2 inputs and 8 outputs.
Two operating modes:
1 stereo input with 4 stereo outputs.
1 mono input with 8 mono outputs.
Adjusting Output level.
Balanced LINK output for interconnecting several units.
Individual gain control of each channel

Inputs: 2 x XLR3 female balanced.
Outputs: 8 x XLR3 male balanced.
Input sensitivity: 0 dBu.
Max. level input: 22 dBu.
Input impedance: 10 kohm.
Level range: ? to - 12dBu.
Frequency response: 20 Hz to 22 kHz.
Distortion: 110 dBu.
Noise and hum: < - 80 dB @ 20 Hz - 22 kHz.
Crosstalk: < - 80 dB @ 20 Hz - 22 kHz.
Output impedance: 120ohm.
Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz.
Power consumption: 20 W.
Dimensions (WxHxD): 483 x 44 x 220 mm.
Weight: 2.75 kg.

DBX 1215
Ισοσταθμιστής 2 x 15 περιοχών με XLR IN/OUT

1215 Dual 15-Band Graphic Equalizer

The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.

•   Switchable boost/cut ranges of ±6 or ±15 dB
•   Electronically balanced/unbalanced inputs
•   Servo balanced/unbalanced inputs
•   RF filtered inputs and outputs
•  XLR, Barrier Strip, and 1/4" TRS connectors
•  -12dB/+12dB input gain range
•  18dB/octave 40Hz Bessel low-cut filter
•  Chassis/signal ground lift capability
•  Internal power supply transformer
•  Power-off hardwire relay bypass with 2-second power-up delay