Content |
DYNACORD΄s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.
The SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORDʼs D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.
The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet΄s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the DND12S400 woofer against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.
The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport. A protective cover is available as an optional accessory.
|
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
Reloop's Active PA Set stands for mobile sound quality. The heart of the entire independent PA system is the massive 600 watt subwoofer module which in addition to a 38 cm speaker also accommodates a perfectly modulated final amplifier including limiter and diplexer. The 'highlights' of the Reloop Active PA system are the two 150 watt satellites.
features:
- 600 watt RMS high-end active subwoofer satellite combination
- Set consists of:
1 x 300 watt RMS high-end active subwoofer
2 x 150 watt RMS high-end active satellites
2 x Aluminium loudspeaker stands
2 x PA professional speaker cables
1 x line cord
technical data:
Subwoofer:
- Type: active bandpass subwoofer
- Frequency range: 35 Hz - 250 Hz
- Acoustic pressure: 129 dB
- Speaker: 38 cm (15“) "Long-Throw" woofer
- Active electronic filter
- Integrated diplexer
- Opto limiter
- Dynaclip protective system
- Transportation wheels
- Carrying handles
- Inputs: 6.3 mm jack, XLR
- Outputs: PA professional speaker cables
- Dimensions: 447 x 542 x 640 mm
- Weight: 48.5 kg
Satellites:
- Type: active 2-way system
- Frequency range: 100 Hz - 18 kHz
- Impedance: 4 ohm
- Acoustic pressure: 119 dB
- Speaker: 20.3 cm (8“) mid/low-frequency speaker, 2.54 cm (1“) tweeter
- Connections: PA professional speaker cable
- Dynamic protective system
- Dimensions: 272.5 x 420 x 250 mm
- Weight: 10 kg |
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.