DYNACORD SUB 112 – ΠΑΘΗΤΙΚΟ ΗΧΕΙΟ SUBWOOFER 12” 400W (ΜΑΥΡΟ)

DYNACORD΄s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.
The SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORDʼs D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.
The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet΄s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the DND12S400 woofer against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.
The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport. A protective cover is available as an optional accessory.

The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.

The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
 

Professional Sound Tools for Musicians
 
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.

Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.

Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.

PREMIUM PR:O - PR:O 15 X
 
Description  The multi-talented prodigy in the PREMIUM PR:O family. The
Description  housing shape enables the PR:O 15 X to be used as a main
Description  PA or a monitor speaker.
Power handling capacity  RMS: 400 W
Power handling capacity  Program: 800 W
Frequency response within +/-3dB  60 Hz ? 19 kHz
Frequency response @ -10dB  53 Hz- 19 kHz
Speaker  1x 15?
Impedance  8 Ohm
HF driver  1?
Axial sensitivity 1w/1m half-space  104 dB
Maximum SPL 10% THD half-space  128 dB
Crossover frequency  2 kHz/12 db Octave
Connections  2x Speakon
Mounting collar  DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar  orientation of the speakers towards the audience
Rigging points  side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD)  47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD)  18 1/2? x 24 1/4? x 17 1/2?
Weight  21.6 kg
Weight  47.52 lbs

FB-120W

Όμοιο με το FB-120B, σε λευκό χρώμα

The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.

The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.

Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:

• Tough, paintable exterior coating
• Cast-frame 18" woofer
• Frequency response of 30Hz-2kHz (-10dB)
• 600W program handling/1,200W peak
• Sensitivity: 96dB
• 22“W x 32“H x 25“D

Professional Sound Tools for Musicians
 
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.

Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.

Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.

PREMIUM PR:O - PR:O 12 M
 
Description  For a band, monitors play an important role too. The classic
Description  monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description  12 M monitor is designed without compromise exactly for this
Description  application to provide the highest possible level of on-stage
Description  performance.
Power handling capacity  RMS: 400 W
Power handling capacity  Program: 800 W
Frequency response within +/-3dB  70 Hz ? 19 kHz
Frequency response @ -10dB  63 Hz ? 19 kHz
Speaker  1x 12?
Impedance  8 Ohm
HF driver  1?
Axial sensitivity 1w/1m half-space  104 dB
Maximum SPL 10% THD half-space  128 dB
Crossover frequency  2 kHz/12 db Octave
Connections  2x Speakon
Dimensions (WxHxD)  39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD)  15 1/4? x 21 3/4? x 15?
Weight  16 kg
Weight  35.2 lbs