Content |
For when you need even more advanced recording than R-09's built-in mic
CS-15CS-15 For serious field recording, the optional CS-15 cardioid-type stereo microphone is a great match for the R-09. For portability and convenience, the R-09 supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.
Cardioid-type stereo microphone
Battery operation is also possible when using with a recorder that doesn't supply the power
Ideal combination with the R-09 --- also the UA-4FX and the UA-1EX
Comes with a desktop stand, a hand-held mount (can be attached to the microphone stand) and a windscreen |
Πυκνωτικό μικρόφωνο κατάλληλο για ραδιοφωνικές εφαρμογές, με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –34 db re 1Mv Pa, ενσωματωμένο pop filter, καρδιοειδές πολικό διάγραμμα, ενδεικτικό LED όταν το μικρόφωνο λειτουργεί και φίλτρο low cut. Περιλαμβάνει δερμάτινη μαλακή θήκη μεταφοράς ZP1, μανταλάκι στήριξης ΒΜ1 και εναλλακτικό πενταπολικό βύσμα.
Tύπος: | Πυκνωτικό | Πολικό Διάγραμμα: | Καρδιοειδές; | Απόκριση συχνότητας: | 20 Hz ~ 20 kHz | Ευαισθησία: | -34 dB re 1 Volt/Pascal (20 mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Αντίσταση: | 40Ω | Συνολική αρμονική παραμόρφωση: | 128 dB SPL (@ 1% THD into 1kΩ) | Διαστάσεις: | 50mmΠλάτος x167mm Ύψος x 50mm Βάθος | Βάρος: | 577gm | Αξεσουάρ: | Δερμάτινη μαλακή θήκη μεταφοράς ZP1, μανταλάκι στήριξης ΒΜ1 και εναλλακτικό πενταπολικό βύσμα. |
|
Γραμμικό + μεταβαλλόμενο πυκνωτικό μικρόφωνο, μήκους 539 χιλ.
• Ιδανικό για χρήση σε εκπομπές, κινηματογραφικές και τηλεοπτικές παραγωγές και σε εφαρμογές ενίσχυσης θεατρικού ήχου
• Απευθείας σύζευξης, ισορροπημένη έξοδος που εξασφαλίζει καθαρό σήμα ακόμα και σε συνθήκες υψηλής εξόδου
• Σχεδίαση χωρίς μετασχηματιστή για βελτιωμένη λήψη μεταβάσεων
• Στιβαρή κατασκευή από ελαφρύ κράμα αλουμινίου
• Αγωγός παρεμβολής για μικρή γωνία υποδοχής
• Εναλλάξιμο φίλτρο διέλευσης υψηλών συχνοτήτων 80 Hz και10 dB pad
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 175 g (6.2 oz)
Dimensions: 539.0 mm (21.22“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case
|
Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7“) ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise
Operates on phantom power only
RoHS compliant free from all substances specified in the EU directive on hazardous substances
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 90-20,000 Hz
Open Circuit Sensitivity: 30 dB (31.6 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 107 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Weight: 80 g (2.8 oz)
Dimensions: 175.0 mm (6.89“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch
|
To sE Laser, είναι ένα νέο πυκνωτικό μικρόφωνο σχεδιασμένο ειδικά για ψηφιακές μηχανές DSLR.
Τοποθετείται πάνω στην κάμερα μέσω της ειδικής βάσης στήριξης και προσθέτει υψηλής ποιότητας ήχο στα βίντεο που γυρίζετε με οποιαδήποτε σύγχρονη κάμερα DSLR.
Γενικά χαρακτηριστικά :
- Επαγγελματικό πυκνωτικό μικρόφωνο (electret)
- Διάγραμμα: Super cardioid (shotgun)
- Τροφοδοσία: 1 μπαταρία AAA 1.5V
- Διαθέτει διακόπτες: 10dB Pad, Bass Cut και On/Off
- Απόκριση συχνότητας: 20Hz-20kHz
- Max SPL: 120dB
- Αντίσταση: ?200ohm
- Ευαισθησία: -30dB ±2dB
- Περιλαμβάνει: Ειδική αντικραδασμική βάση, καλώδιο μικροφώνου (3.5mm jack), θήκη μεταφοράς, αφρώδες αντιανέμιο.
|
Γραμμικό + μεταβαλλόμενο πυκνωτικό μικρόφωνο, μήκους 233 χιλ.
• Σχεδιασμένο για χρήση σε εκπομπές, κινηματογραφικές και τηλεοπτικές παραγωγές και σε εφαρμογές ενίσχυσης θεατρικού ήχου
• Απευθείας σύζευξης, ισορροπημένη έξοδος που εξασφαλίζει καθαρό σήμα ακόμα και σε συνθήκες υψηλής εξόδου
• Πρωτοποριακή ακουστική σχεδίαση που παρέχει την ίδια κατευθυντικότητα με μικρόφωνα έως και 50% μακρύτερα
• Εναλλάξιμο φίλτρο διέλευσης υψηλών συχνοτήτων 80 Hz και10 dB pad
• Στιβαρή κατασκευή από ελαφρύ κράμα αλουμινίου
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 99 g (3.5 oz)
Dimensions: 233.0 mm (9.17“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8144 windscreen; two O-Rings; protective carrying case
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.