| Content | The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.
Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.
| Maximum Current: |
6 amps |
| Line Cord: |
Captive AWG, 2.5M black cord with IEC Female to Schuko plug |
| BNC Socket w/Switch: |
12VAC 500MA maxx (lamp not included) |
| Operating Voltage: |
170 to 274 VAC |
| Over-Voltage Shutdown: |
275 VAC Nominal |
| Approximate Input Voltage Capture Range: |
174 to 264 VAC |
| Spike Protection Mode: |
Line to neutral, zero ground leakage |
| Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
| Response Time: |
1 nanosecond |
| Maximum Surge Current: |
6,500 Amps |
| Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
| Dimensions: |
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H) |
| Weight: |
7 kg. |
| Power Consumption: |
5 watts |
SPECIFICATIONS:
| Maximum Current: |
6 amps |
| Line Cord: |
Captive AWG, 2.5M black cord with IEC Female to Schuko plug |
| BNC Socket w/Switch: |
12VAC 500MA maxx (lamp not included) |
| Operating Voltage: |
170 to 274 VAC |
| Over-Voltage Shutdown: |
275 VAC Nominal |
| Approximate Input Voltage Capture Range: |
174 to 264 VAC |
| Spike Protection Mode: |
Line to neutral, zero ground leakage |
| Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
| Response Time: |
1 nanosecond |
| Maximum Surge Current: |
6,500 Amps |
| Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
| Dimensions: |
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H) |
| Weight: |
7 kg. |
| Power Consumption: |
5 watts |
|
1U Rack διπλό φωτιστικό με dimmer και 10 εξόδους 230V για τροφοδοσία effects. | Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
| Adam Hall Cables 87471 X7
19" Power Strip 1U 7-way with switch & protection cap
- Mountable Power Strip from our 19" PDU range
- With recessed, illuminated switch and protective cap
- 7 Schuko sockets rotated 45°
- With 8-way adjustable mounting brackets
- 1.4 m PVC cable with angled Schuko plug
The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
7, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch with protective cap, Mounting brackets can be inserted in 8 positions
|
The Furman PL-Plus C Power Conditioner protects your valuable equipment from mains power spikes and sags. Advanced Series Multi-Stage Protection Plus SMP+ circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Furman Linear Filtering Technology LiFT. The Furman PL-Plus features 8 rear-panel AC mains outlets and one front-panel AC mains outlet, a 10-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back panel connector for gooseneck lamp with front-panel switch, and a segmented LED voltmeter to monitor and display incoming line voltage. The Furman PL-Plus C fits in one 19-inch rack space.
Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so withFurman SMP+. With the PL-PLUS C's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no maintananc, no down time.
Unique to the Furman PL-PLUS C's SMP+ is its clamping voltage. Other designs offer clamping voltages that are well above 375VAC peak, the Furman PL-PLUS C's SMP+ clamps at 375VAC peak, even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology.
The Furman PL-PLUS C features LED rack lights which produce virtually no heat and provide an extremely long life. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. The Furman PL- PLUS C includes a rear mounted BNC jack which accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation
FURMAN PL-PLUS C E CLASSIC SERIES POWER CONDITIONER WITH VOLTMETER FEATURES
8 Rear-panel outlets and one front-panel outlet.
10-amp rating with circuit breaker.
Retractable LED rack lights with on/off/dimmer control.
BNC back panel connector for gooseneck lamp with front-panel switch.
Segmented LED voltmeter to monitor and display incoming line voltage.
Multi-stage protection.
Extreme voltage shutdown.
Linear filtering technology.
FURMAN PL-PLUS C CLASSIC SERIES POWER CONDITIONER SPECIFICATIONS
Maximum Output Current: 10 amps.
Pull-out Lights: Two multi-LED, dimmable lamps.
BNC Socket with Switch: Rear rack lamp, 12VAC 500mA maxx. Lamp not included.
Operating Voltage: 180 to 274 VAC.
Spike Protection Mode: Line to neutral, zero ground leakage.
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps.
Maximum Surge Current: 6,500 Amps.
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (mm, WxDxH): 482.6 x 266.7 x 4.45.
Weight: 6 kg.
Power Consumption: 12 watts.
|
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
| Maximum Output Current: | 10 amps | | Line Cord: | 1.5 meter, removable, IEC C-13 female to Schuko male | | Operating Voltage: | 230VAC 50Hz | | Spike Protection Mode: | Line to neutral | | Energy Dissipation: | 305 joules | | Peak Impulse Current: | 12,000 amps | | Maximum Continuous Opterating Voltage: | 650 Volts | | Noise Attenuation: | Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz | | Dimensions: | 1.75” H x 19” W x 7.5” D | | Weight: | 2.3 kg. | | Safety Agency Listing: | CE | | Warranty: | Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.