JBL CSM-32 PUBLIC ADDRESS MIXER

Επεξεργαστής σήματος, διαθέτει 3 stereo, 1 line priority audio, 1 mic με phantom power εισόδους, και 2 stereo εξόδους με ενσωματωμένο crossover για χρήση subwoofer, συν 1 aux έξοδο. Συμβατό με τα επίτοιχα controllers της σειράς CSM για απομακρυσμένο έλεγχο, και τα μικρόφωνα αναγγελιών CSPM. Δυνατότητα ducking και ελέγχου της ποσότητας μέσο κομβίου, θύρα RJ-45 για Link με άλλες μονάδες, θύρα USB για Firmware Update. EQ, Level Guard και Auto Warmth σε κάθε είσοδο για ομοιόμορφη ακρόαση και συχνοτική συμπεριφορά ανεξαρτήτως έντασης. Εύκολο routing.

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  33 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Zone output selector και matrix 6x21 ζώνες. 3 έξοδοι για σύνδεση με εξωτερικό ενισχυτή και δυνατότητα επικοινωνίας με C-500, Z-500, V-500, F-500 μέσο θύρας RS-232.

*6 Input 21 Output Matrix

*Allocate  BGM Source to Desired Output Zone

*Clear LED/LCD Visual Display Shows Status of Each Area/Zone

*Interface for Remote Zone Controllers L-500(21 Zones)

*Interface for Remote Paging Microphones RM-500(4 No.)

*Adoption of RS-422/RS-232 Communication Method Supporting Long Distance

*Conveient Connection with 7-Ch Power AMP with Adoption of Lump-sum Output terminal

*Power Source: DC 24V

*Weight: 4.3kg/9.5Ib

*Dimensions(W×H×D): 482×132×380mm/19×5.2×15in