| Content |
Μίκτης ενισχυτής 240W/100V τεσσάρων ζωνών (4x60W). Διαθέτει εξόδους high impedance και 8Ω, έξοδο pre amp για σύνδεση με εξωτερικό τελικό ενισχυτή, εισόδους πέντε mic/line (κατʼ επιλογή) με priority και phantom power 48V στα mic 1 και 2, gain control σε όλες τις εισόδους, ενσωμετωμένο chime με δύο τόνους, δυνατότητα σύνδεσης με τηλεφωνικό κέντρο και εξωτερικό chime. Κατάλληλο για χώρους που απαιτείται backround μουσικη οπως εμπορικα καταστηματα, κομμωτήρια κτλ
Ισχύς εξόδου (RMS): 240W Ισχύς: 240W/100V τεσσάρων ζωνών (4x60W). Είσοδοι: 5 mic/line (κατʼ επιλογή) με priority και phantom power 48V στα mic 1 και 2 Gain control σε όλες τις εισόδους, Εξοδοι: high impedance και 8Ω, Master volume Ενσωματωμένο chime με δύο τόνους Έξοδο pre amp για σύνδεση με εξωτερικό τελικό ενισχυτή Δυνατότητα σύνδεσης με τηλεφωνικό κέντρο και εξωτερικό chime. Δέχεται module στο front panel CDR-100RDS (radio-cd), TP-100 (tuner FM/AM), DM-100 (digital message) Διαστάσεις (HxWxD) 133x483x350mm Βάρος: 13kg Rackmount 3U
Tεχνικά χαρακτηριστικά
Έξοδοι ηχείων:100V, 70V / 8ohm, 2.6ohm AC Power: 240V, 50Hz DC Power: 24V THD at rated power: 60dB Signal/Noise ratio, Aux: >70dB
|
P-120D features 2x 200W into 4 Ohm load. This amplifier matches the needs for noiseless operation through air-cooling. It is ideally suitable in studios, small theatres, cabarets, churches, conference- and multimedia rooms etc. Multiple protection circuits care for stable operation. The amplifier is rackmountable (2 units). The optional transformer LT-101 converts the input to a balanced transformer isolated input. |
Ενισχυτής αυτοκινήτου 30W, με δυνατότητα τροφοδοσίας 12V από μπαταρία, 2mic input, 1AUX και μικρόφωνο με push talk διακοπτη.
| Specification |
|
|---|
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | | Power Consumption | 4.4A or less at rated power output. | | Output Power | Rated 30W, max. 60W | | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | | Distortion | Less than 5% (at 1kHz rated output) | | Frequency | Response 100 ~ 10,000Hz | | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | | Dimensions | (W x H x D): 178 x 50 x 144mm (mounting device excluded) | | Weight | 1.1 kg | | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (8A) ... 1
Connection cord ... 1 set | | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
Input module για ενισχυτές VP με είσοδο BGM |
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
| Power Source | Supplied from VP-2064, VP-2122, VP-2241 or VP-2421 | | Current Consumption | 30 mA or less | | Power Amplifier Link | RJ45 female connector for connecting the VX-200SP,
VX-200SZ Audio Output module, or SX-2100AO.
Twisted-pair straight cable (TIA/EIA-568A standard) | | Finish | Panel: Surface-treated steel plate | | Dimensions | 88 (W) × 25.8 (H) × 53.2 (D) mm | | Weight | 50 g | | Applicable Model | VP-2064, VP-2122, VP-2241, VP-2421 |
|
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 33 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.