Content |
The Shure N 44 G DJ, Jico is a high quality replacement needle and comparable to the original stylus.
The Japanese company Jico is specialized in the production of replacement needles for more than 70 years.
The high quality is a result of the combination between material knowledge and processing technology.
On one hand committed to tradition and on the other hand open for technical innovation, Jico produces themselves both, material and production tools.
The sophisticated process plus the manual work on each needle makes the Jico replacement needles distinctive in finish and sound.
The Shure N 44 G DJ from Jico replaces the following styli: Dual DN 305, Shure N 44C, N 44G, N 44-7, N 55 E, Pfeifer 10472, Pfeifer 10473. E009605
0.7 mil conical needle, weight 0.5 g
Cantilever |
Aluminum |
Cartridge number |
M44G |
Color |
DK / Grey |
Tip |
Conical Stylus |
Tracking Force |
3.5 – 4.5 g |
Type |
Moving Magnet |
| Bελόνα Πικάπ για την κεφαλή της Νumark CC-1 |
ORTOFON 520MKII βελόνα
Frequency range 20-23.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 25 µm/mN
Stylus type Nude Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 520 Mkll, 520, 520 P |
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Technical data
Output |
3,5 mV |
|
Frequency response |
10-25.000 Hz dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
30 µm/mN |
Stylus type |
Spherical |
Stylus tip radius |
R 15 µm |
Tracking force range |
1,25-1,75 g (12,5-1,75 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
Recommended for following cartridges |
Dual TKS 49S |
Recommended for following cartridges - Dual TKS 49 S
*) Typical value |
Stylus 5E
Technical data |
| Frequency range |
20-25.000 Hz
| Frequency response |
20-25.000 Hz
| Tracking ability at 315Hz at recommended tracking force *) | | |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.