Content |
The C400 C is a professional 4 channel compressor that can be operated as 4 separate
processors or linked as two independant stereo pairs. In Link mode, Channel 1 and 3
provide Master control and 'rms summing' is used to ensure that signals from both the
linked channels affect compression equally. Each channel has fully variable controls for
Threshold, Ratio, Release and Gain. The compression slope can be switched between
Hard or Soft knee, with Hard knee providing tight control of compression Ratio and Soft
knee a more progressive style of compression. Two Attack/Release modes are available;
Auto (program dependant) Attack/Release or Auto Attack with manuallly adjustable Release.
A low frequency Program filter can be switched into the sidechain to reduce the effects of
bass heavy material causing over compression. Each channel also has a sidechain insert
jack. Gain Reduction is displayed on an 8 segment LED bargraph. The Bypass and Link
switches also have led indicators. All Inputs and Outputs are electronically balanced and
can be switched between +4dBu and -10dBV operating levels.
TECHNICAL SPECIFICATIONS:
ELECTRICAL
Frequency response: 20Hz to 20kHz (+0, -0.5dB)
Input Impedance: 20k balanced
Maximum Input Level: +20dBu
Input-Output Level: +4dBu or -10dBV
Output Impedance: 100R balanced
Max. Output Level: +20dBu
THD:
Signal to Noise Ratio: > 90dB, +4dBu out, 22Hz- 22kHz
Threshold: -40dB to +20dB
Ratio: 1:1 to >20:1
Knee: Hard or Soft knee
Attack: Auto Attack/Release or program
dependant
Release: 40ms to 4s - manual mode
Program Filter: -6dB @ 100Hz
Gain: -20dB to +20dB
Power Requirement: 15VA, 115/230V AC, 50/60Hz
PHYSICAL
Input Connectors: XLR 3 pin (Pin 2 hot)
Output Connectors: XLR 3 pin (Pin 2 hot)
Power Connection: IEC 3 pin socket, Detachable lead
Dimensions (mm): 482 (19“) W
164 (6.5“) D
44 (1.75“) H
Weight: 2.9 kg, 6lbs
Shipping Weight: 3.6kg, 8lbs
Temperature Range: Operating 0?C to 50?C
Storage -30?C to 75?C
|
Features Enhance switch to restore spectral balance of compressed signal Switchable Mode - Dual Channel or Stereo linked Above or Below Threshold LEDs Balanced XLR and Jack Inputs and Outputs Intuitive, user friendly layout Flawless performance
Innovation The ARX COMPO? is a unique compressor/limiter designed for use in any professional audio dynamics control application, packaged in a compact 1 RU chassis.The COMPO operates as two independent compressor/limiters, with 'industry standard' variable Threshold, Ratio and Output gain controls. A Stereo Link switch on the front panel lets both channels track as a stereo pair in a Master/Slave configuration. Enhance Switch The COMPO features an 'Enhance' switch, which provides frequency restoration to preserve the spectral balance of the audio signal, compensating for the sagging Low and High frequency response of compressed program material. The best way to think of it is as a 'smart' loudness control. Wide Scale metering There is comprehensive LED indication of all operating functions and status. Above or Below Threshold LEDs on each channel give you instant visual confirmation of compressor activity, as well as easy to read LED Gain Reduction meters. Balanced Inputs and Outputs On the rear panel, each channel has true differential Balanced inputs and outputs, on both XLR and TRS jack connectors. Other features include an Active/Bypass switch for each channel, and passive RFI filters on the inputs. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. ARX Quality With its smooth compression, intuitive user friendly layout, high density precision circuitry, and extensive user-variable operating parameters, the ARX COMPO is the ideal installation 'set and forget' compressor, and is also equally at home in Studio, Broadcast and Sound Reinforcement environments.
Every day, ARX Audio interface products solve audio problems for thousands of people around the world.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 22 dB CMRR >60 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 22 dB Frequency Response 20Hz to 20KHz ±0.4dB Signal to Noise ratio -85 dB Unweighted, -99 dB 'A' weighted Distortion .02% THD @ 0dB,1KHz Dynamic Range 107 dB Enhance Section Low Enhance 50 Hz, High Enhance 10 KHz Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input/OutputConnector type XLR, Balanced Jack
Front Panel Controls Channel A Active/Bypassed IN/OUT switch Threshold, Ratio and Output Gain controls Numbered marker panel for labelling compressor assigns 5 segment LED Gain Reduction display Above/Below Threshold status LEDs Enhance switch and status LED Stereo link switch and status LED Channel B controls identical to Channel A Rear Panel Connectors Balanced XLR Input and Output connectors. Balanced TRS jack Input and Output connectors. AC input connector, with voltage switch and fuse. |
Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor. Ανιχνεύει αυτόματα τους μικροφωνισμούς και τους εξαφανίζει. Διαθέτει επίσης low cut filter, phantom power, balanced in/out.
Χαρακτηριστικά:
Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor
Αυτόματα ανιχνεύει και εξολοθρεύει 8 συχνότητες μικροφωνισμών
Ultra low noise mic/line είσοδος με gain control και +48V phantom power τροφοδοσία για πυκνωτικό μικρόφωνο
Delay line μέχρι 2,5 sec και με ρύθμιση μέτρων ποδιών και msec
Noise gate με αυτόματες και manual ρυθμίσεις
Αυτόματο compressor
Low cut filter με ρύθμιση συχνότητας
Είσοδος – έξοδος σε balanced JACK 6,35 και XLR
Frequency response: 10H – 21KHz
Noise: 92dB (line), 89dB mic
THD: 0.007%
Μετατροπείς: 24bit Sigma-Delta, 64/128-times oversampling
Η συσκευασία περιλαμβάνει: fbq100, users manual
Τροφοδοσία: AC 220V / 50Hz
Διαστάσεις: 56 x 88 x 132 mm
Βάρος: 380 gr
|
DBX-166XL
Compressor - limited- gate /expander 2 εισόδων κύκλωμα overeasy,
peakstopplus, είσοδοι- έξοδοι XLR κατάλληλος για studio & live χρήση.
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications Input Connectors | 1/4" TRS, female XLR (pin 2 hot) | Input Impedance | >50kΩ balanced, >25kΩ unbalanced | Max Input | >+24dBu, Balanced or Unbalanced | Input Type | Electronically balanced/unbalanced, RF filtered | Sidechain | 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) | Sidechain Impedance | Tip = >10kΩ (Input), Ring = 2kΩ (Output) | Sidechain Max Input Level | >+20dBu (tip/input); >+20dBu (ring/output) | Output Connectors | 1/4" TRS, female XLR (pin 2 hot) | Output Impedance | 120Ω balanced, >60Ω unbalanced | Max Output | +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) | Frequency Response | 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain | Noise | |
|
Features Four Independent Compressor Channels Channels 1 and 2, 3 and 4 are stereo linkable 7 LED Gain Reduction metering Balanced XLR Inputs and Outputs Sidechain Insert points Intuitive, user friendly layout Flawless performance The sheer amount of effects and signal processors necessary for today's standards of audio production puts a great strain on the available space in equipment racks, both in the studio and on the road.So, ARX would like to introduce the ARX Quadcomp. An all-new upgrade of the classic award-winning ARX Quadcomp?, the very first four channel 1 RU compressor.You?ll notice that we haven?t strayed very far from our original design concept. The Quadcomp is still four variable ratio Compressor/ Limiters neatly housed in a compact all steel 1 RU package. However, all new low noise/low distortion circuitry, better metering plus XLR inputs and outputs put the Quadcomp in a class of its own. More Control, Less Space On the front panel, each channel has the 'industry standard' individual controls for Threshold, Compression Ratio and Output, plus a new 7 LED Gain Reduction display for accurate visual indication of the amount of gain reduction being applied to the program, and an IN/OUT hardwire bypass switch.In addition to this, each channel has a blank numbered panel to write on for easy confirmation of compressor assigns. Precision Circuitry Internally, each compressor uses Class A VCAs and true 2 pole averaging RMS/DC converters for low distortion and accuracy, plus program dependent attack and release time, which automatically determines optimum compressor response. Balanced Inputs and Outputs The rear panel has true differential Balanced XLR Inputs and Outputs for each compressor. Each compressor has a TRS jack Sidechain access insert point, for frequency sensitive compression, De-essing, etc. in conjunction with an external equalizer (such as the ARX EQ260). Compressor pairs 1 and 2, 3 and 4 also have rear panel mounted Stereo Link switches for accurate stereo tracking. When switched IN, the first channel becomes the master and controls all the functions of the second except Output gain. Universal AC Power AC power range is switchable 100 to 120V, or 220 to 240V, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage switch. Whatever the application ? Channel insert, Bus insert, Master Outputs, Monitor outputs, Crossover outputs, the Quadcomp II?s unique High Density design, precision Low Noise circuitry and clean uncluttered layout make it a truly useful audio tool for all applications.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 20dB CMRR >50dB, 20 Hz?20 KHz Output Impedance Balanced 300 ohms Unbalanced 150 ohms Output Level (Max) + 20 dB Frequency Response 20Hz-20KHz ±0.5dB Signal to Noise ratio -93 dB Unweighted, -98 dB ?A? weighted Distortion .015% THD @ 0dB,1KHz Dynamic Range 108 dB Attack and Release Times Program dependent Metering 7 LED display: ?1, 2, 3, 6, 12, 18, ?24 dB Sidechain Insert Impedance 10 Kohm Power Requirements 100/120 V AC or 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input Connector type Balanced XLR Output Connector type Balanced XLR Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls 7 LED Gain Reduction display Marker panel for labelling compressor assigns Stereo link status LEDs Rear Panel Connectors Input and Output balanced XLR connectors TipRingSleeve Sidechain insert connectors Channels 1 and 2, 3 and 4 Stereo link switches IEC AC mains connector with inbuilt fuse and voltage change |
DBX-1074
4 ch noise gate με δυνατότητα λειτουργίας σε ρυθμιζόμενο εύρος
συχνοτήτων XLR in/out, insert points.
- Four independent channels of gating
- Independent key filtering
- Independent Threshold and Release controls
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Stereo Coupling mode
- Switchable +4dBu or -10dBv operation per channel
Input Connectors | XLR (Pin 2 and tip hot) | Input Type | Electronically balanced/unbalanced, RF filtered | Input Impedance | Balanced > 50 kOhm, unbalanced >25 kOhm | Max Input | > +22 dBu balanced or unbalanced | CMRR | 40dB: Typically >55 dB at 1 kHz | Key Input | Electronically balanced/unbalanced, RF fitered Balanced 50kOhm, unbalanced > 25 kOhm | Output Connectors | XLR (Pin 2 hot) | Output Type | Servo-balanced/unbalanced, RF filtered | Output Impedance | Balanced 60 Ohm, unbalanced 30 Ohm | Max Output | > +22 dBm balanced, > +20 dBm unbalanced | Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB | Frequency Response | 0.35 Hz to 200 kHz, +0/-3 dB | Noise | | Dynamic Range | > 115 dB, unweighted | THD+Noise | 0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), | Interchannel Crosstalk | | Stereo Coupling | True RMS Power Summing | Operating Voltage | 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz | Power Consumption | 30 Watts | Fuse | 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T | Power Connector | IEC receptacle | Unit Weight | 6.9 lbs. | Shipping Weight | 9.3 lbs. |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.