| Content |
User's manual [5,41 MB]LD Systems zone 423 2-Zone-Mixer
The ZONE 423 is a full featured zone mixer with 4 line and 2 microphone channels, that can be assigned to a master and a zone output, as well as inputs for an external emergency announcement system and remote-controlled switching mute. Through versatile connectivity, the compact 2U rack device is the perfect control centre for PA systems in food outlets, clubs, hotels, fitness centres, and is also excellent for presentations and DJs.
In addition to the two balanced microphone inputs with variable Gain and Talkover level,12V-phantom power, and a shared 3-Band-EQ, the ZONE 423 offers Line, Phono-, and Aux-stereo connections in RCA format, a FOH-input with balanced stereo jack plugs as well as a USB and 3.5mm mini jack. The USB-port is used as a stereo input and output and allows the mixer to be used as an external audio interface. The four input channels have individual gain controls with signal and peak value display, 45 mm faders for adjusting the volume and cue buttons.
The master and zone sections each have their own EQ, balanced XLR and unbalanced RCA outputs: the master output via terminal block connectors and the zone output using a mono sum switch, and 100 Hz high-pass filter. The stereo level indication can be set to master or zone, and the maximum output level can be preset for both on the back of the mixer. In addition to an adjustable headphone connection for pre-listening, the ZONE 423 also has a recording output.
- Type: stereo
- Number of Zones: 2 (Master, Zone)
- Installation Height: 2U
- Total Input Channels: 6 (2x Mic, 1x Line/Aux, 2x Line/Phono, 1x Line/FOH)
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channel Connections: 6.3 mm stereo jack (balanced), XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: Gain, On/Off, 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1 x Talkover Level
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 8 mV
- Microphone Channels THD: 0,07 %
- Line Channels: 4 (Input 1: USB/Line, Input 2 + 3: Line/Phono/CD, Input 4: Line/FOH)
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack + USB, input 2 + 3: 4 x RCA, input 4: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, Source, Cue, Level, Enable FOH
- Line Channel Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 60 kOhm)
- Line Channels Input Sensitivity: 1 V (Phono 10 mV)
- Line Channels THD: 0,03 % (Phono 0,05 %)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 3 (Master - Stereo, Zone - Stereo/Mono, Rec - Stereo)
- Output Connectors Master: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ HI, EQ Mid, EQ Low, Max. Level
- Master Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Master Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Zone Output Connections: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Zone Controls: Level, Source Input 2 - 4/Mix, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Mono
- Zone Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Zone Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 1,2 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Connections Additional Inputs: Terminal Block
- Additional Input Controls: Level Emergency Input
- Input Sensitivity Emergency Input: 5 V
- Additional Controls: power switch
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 22 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 483 x 89 x 210 mm
- Accessories Included: terminal blocks, power cable, operating instructions
|
Συσκευή διαχείρισης σημάτων audio/video. Διαθέτει 8 εισόδους/εξόδους audio και 8 εισόδους/εξόδους video. Δυνατότητα επιλογής μεταξύ των πηγών εισόδου/εξόδου audio/video. Λειτουργεί με τάση από 100V-230V, 50/60Ηz. Κατάλληλο για TV post production studio, κλειστά κυκλώματα παρακολούθησης χωρών κ.τ.λ.
|
VIDEO
| |
Video Input
|
VS or VBS 1.0Vp-p 75Ω, 8CH, BNC
| |
Video Output
|
VS or VBS 1.0Vp-p 75Ω, 8CH, BNC
| |
Frequency Response
|
Below ±0.5dB(7MHz)
| |
S/N
|
-60dB
| |
Crosstalk
|
-60dB
| |
Audio
| |
Audio Input
|
2.2Vp-p, High Impedance Unbal/RCA
| |
Audio Output
|
2.2Vp-p, High Impedance Unbal/RCA
| |
T.H.D
|
Below 0.1(20Hz-20kHz)
| |
Frequency Response
|
Below -3dB
| |
S/N
|
90dB
| |
Crosstalk
|
-90dB
| |
CONTORL CPU MICOM
| |
Interface
|
RS-232C
| |
Operating Temperature
|
-10℃~+40℃
| |
Storage Temperature
|
-20℃~+60℃
| |
Operating Humidity
|
Below 90% RH
| |
Power Source
|
100-120VAC or 220-240VACl 50/60Hz
| |
(supplied AC mains transformer depends on country requirements)
| |
Weight
|
5kg/11lb
| |
Dimensions
|
482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in
|
| Ψηφιακός τελικός ενισχυτής 16 καναλιών, ισχύς RMS 4Ω 16x80ws, ισχύς RMS bridged 8x160w, line input unbalanced x 20, κανάλια εξόδου 16, απόκριση συχνότητας 20 - 30kHz, |
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 400: 2x 200 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 17 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) | User's manual [14,45 MB]
LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
- Type: live, installation
- Channels: 8
- Mono input channels, line: 6
- Stereo line input connectors: 4x XLR, 2x 6.3 mm jack
- Mono line input type: electronically balanced
- Stereo input channels, line: 1
- Stereo line input connectors: 2 x XLR
- Stereo line input type: electronically balanced
- Input impedance: 50000 ohms (balanced), 25000 ohms (unbalanced)
- Maximum input level: + 21 dBu
- Nominal working level: -10 dBV to +4 dBu
- Mono output channels: 6
- Mono output connectors: 4x XLR, 2x 6.3 mm jack
- Mono output type: electronically balanced
- Stereo output channels: 1
- Stereo output connectors: 2x XLR
- Stereo output type: electronically balanced
- Output impedance: 60 ohms (balanced), 30 ohms (unbalanced)
- Maximum output level: + 22 dBu
- Frequency response: 5 Hz - 40000 Hz
- THD: 0,0008 %
- S/N ratio: 85 dB
- Controls: Main Input Level, Main Output Level, Main Link, Level Channel 1-6, Bal/Pan Channel 1-6, Splitter/Mixer Channel 1-6, Power
- Indicators: Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), In/Out Level Channel 1-6 (6 -segment), Power
- Operating voltage: 220 - 240 V AC, 50 - 60 Hz
- Power socket: IEC power socket
- Power consumption: 15 W
- Fuse: T 315 mAL, AC 250V
- Dimensions (W x H x D): 483 x 44.5 x 216 mm
- Accessories included in package: power cord
|
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 600: 2x 300 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 19 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.