| Content |
Επαγγελματικά bi-amplified nearfield monitors δύο δρόμων με kevlar woofer 5 ιντσών και tweeter μαλακού θόλου 1 ίντσας. Είσοδοι balanced και unbalanced (XLR & TRS), απόκριση συχνοτήτων 53Hz - 22kHz, κυκλώματα προστασίας και εξωτερική ασφάλεια, συχνότητα crossover 3kHz, μέγιστη δυναμική περιοχή > 100dB, ενισχυτής LF 40W, ενισχυτής HF 30W, RMS 70W, Peak 100W. Μαγνητικά θωρακισμένα
frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.
| Χαρακτηριστικά της σειράς D3
> Σχεδίαση με δύο ενισχυτές για δυναμικό και ακριβή ήχο,
> Ειδικά σχεδιασμένος οδηγός στα tweeter, για καλύτερη στερεοφωνική εικόνα,
> Σύστημα 'Acoustic Space Control', για προσαρμογή των χαμηλών συχνοτήτων στον κάθε χώρο,
> Βελτιωμένο σύστημα Bass Reflex, για εκτεταμένη απόκριση χαμηλών συχνοτήτων,
> Είσοδοι XLR balanced και 1/4” balanced/unbalanced, για εύκολη σύνδεση με audio interfaces,mixers, synthesizers, DJ gear
>Έλεγχος στάθμης ακρόασης,
>Φωτεινή ένδειξη LED στο εμπρός μέρος, που γίνεται πιό έντονη όταν το ηχείο τοποθετείται στη σωστή γωνία ακρόασης.
Χαρακτηριστικά BX8
> Συνολική ισχύς 150 watts (80 watts για woofer, 70 watts για tweeter),
> Woofer 8 ιντσών από Kevlar,
> Tweeter θόλου 1.25 ιντσών (από φυσικό μετάξι) με εξαιρετική λεπτομέρεια στον ήχο,
> Απόκριση συχνότητας: 37Hz - 22kHz.
Η τιμή αφορά σε τεμάχιο |
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
| Woofer |
| | Number | 1 | | Basket Ø | 9" (228 mm) | | Voice coil Ø | 2" (50 mm) | | Cone material | HexaCone | | Midrange |
| | Number | 1 | | Basket Ø | 4.5" (116 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Midrange | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | | EQ 80 Hz | 0 to +6 dB (1 dB steps) | | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | | Low Shelf EQ | ±4 dB (1 dB steps) | | Tweeter gain | ±2 dB (0.5 dB steps) | | Input connectors |
| | Analog | XLR | | Digital (optional) | AES/EBU / SPDIF / word clock | | General data |
| | Panel | Front | | Frequency response | 32 Hz - 50 kHz | | THD > 80 Hz | ≤0.6 % | | Long term output | ≥114 dB | | Max. peak | ≥124 dB | | Crossover frequencies | 350 / 2800 Hz | | Input impedance | 10 KOhm | | Weight | 34 lb (15,4 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
| ΤΙΜΗ ΤΕΜΑΧΙΟΥ
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
| Subwoofer |
|
| Number |
1 / 1 |
| Basket Ø |
7" (175 mm) / 7" (175 mm) |
| Voice coil Ø |
1.5" (38 mm) / 1.5" (38 mm) |
| Cone material |
Carbon / rohacell / glass / Carbon / rohacell / glass |
| Tweeter |
|
| Number |
1 |
| Type |
X-ART |
| Diaphragm area |
4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø |
2" (56 mm) |
| Velocity transform ratio |
4:1 |
| Diaphragm weight |
0.17 g |
| Built-in Amplifiers |
|
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Tweeter |
1 |
| Type |
A/B |
| Amp. power RMS / music |
50 W / 75 W |
| Control panel |
|
| Input Sensitivity |
-∞ to +14 dB |
| High Shelf EQ > 5 kHz |
±6 dB |
| Low Shelf EQ |
±6 dB |
| Tweeter gain |
±4 dB |
| Input connectors |
|
| Analog |
XLR / RCA |
| Location |
Rear |
| General data |
|
| Panel |
Front |
| Frequency response |
38 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz |
≤0.5 % |
| Long term output |
≥114 dB |
| Max. peak |
≥122 dB |
| Crossover frequencies |
400 / 3000 Hz |
| Input impedance |
30 KOhm |
| Weight |
28.2 lb (12,8 kg) |
| Magnetically shielded |
Optional |
| Height x Width x Depth |
9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) |
| Warranty |
5 Years |
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The original A5
The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).
The new A5X
The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.
Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.
A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.
Stereolink
A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.
This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.
Controls and Connectors
The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.
Review: "The A5X: a superb impression."
“A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)
| Mid-Woofer |
| | Number | 1 | | Basket Ø | 5.5" (145 mm) | | Voice coil Ø | 1.5" (32 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 50 W / 75 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 50 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.6 % | | Long term output | ≥102 dB | | Max. peak | ≥110 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 14.6 lb (6,6 kg) | | Magnetically shielded | No | | Height x Width x Depth | 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm) | | Warranty | 5 Years |
| Delivery contents | |
Cinch-cable, Power cord, Manual
|
|
Ενεργό monitor (2 way active), 8.75 ίντσες υψηλής ευκρίνιας , χαμηλής παραμόρφωσης LF αισθητήρες, 1 ίντσα θόλος τιτανίου, ferrofluid cooled tweeter, twin FR series ενισχυτές (150watt LF/100watt HF), passive radiator , articulate bass extension μέχρι 35Hz, balanced XLR/TRS και unbalanced RCA εισόδους, THX pm3™ για surround sound εφαρμογές.
High resolution Active studio reference monitorUltra-linear frequency response for accurate mix translation8.75-inch high-precision, low-distortion LF transducer1-inch titanium dome, ferrofluid cooled tweeterOptimized Waveguide for wide, even sweet zoneTwin FR Series amps — 150W for LF / 100W for HFCast aluminum Zero Edge Baffle™ minimizes diffractionFull internal damping eliminates midrange artifactsPassive radiator provides tight, articulate bass extension down to 35HzAcoustic Space, LF roll-off, and HF controlsBalanced XLR, TRS, and unbalanced RCA inputsOmniMount™ ready for easy wall/ceiling placementTHX pm3™ certified for surround sound applicationsPerfect for High-Definition audio, cinema and gaming systemsΔιαστάσεις (HxWxD) 425x 273x290mm.Bάρος 15,7kg. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.