| Content |
Επαγγελματικά bi-amplified nearfield monitors δύο δρόμων με kevlar woofer 5 ιντσών και tweeter μαλακού θόλου 1 ίντσας. Είσοδοι balanced και unbalanced (XLR & TRS), απόκριση συχνοτήτων 53Hz - 22kHz, κυκλώματα προστασίας και εξωτερική ασφάλεια, συχνότητα crossover 3kHz, μέγιστη δυναμική περιοχή > 100dB, ενισχυτής LF 40W, ενισχυτής HF 30W, RMS 70W, Peak 100W. Μαγνητικά θωρακισμένα
frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.
|
Ενεργά επαγγελματικά ηχεία 2 δρόμων nearfield με 2 ενσωματωμένους ενισχυτές (150+100W RMS). Με μεγάφωνα Focal 6,5” κώνου ΅ΆWΆΆ σε διάταξη sandwich για το woofer και ανεστραμμένου θόλου καθαρού Βηρυλλίου για το tweeter. Το γούφερ είναι κατασκευασμένο σε μορφή κώνου ΅ΆWΆΆόπως και τα μεγάφωνα στις περίφημες consumer σειρές Utopia της Focal και το τουίτερ είναι το ίδιο περίφημο τουίτερ βηρυλλίου ανεστραμμένου θόλου από τις ίδιες σειρές.
Η τιμή του προϊόντος αφορά τεμάχιο και όχι ζευγάρι
Χάρη στην εξαιρετική κρουστική απόκριση το tweeter παίζει flat μέχρι τα 40kHz. Παρά το μέγεθός του έχει μεγάλο και αληθινό ήχο με δυναμική περιοχή SPL της τάξης των 113dB@1M. Τα Solo6 ενσωματώνουν τον άριστο τεχνικό σχεδιασμό και την κατασκευαστική εμπειρία των 30 χρόνων των Focal.
Specifications | Frequency response : | 40Hz - 40kHz | | Maximum SPL : | 113dB SPL (peak @ 1m) | |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| | Bass/mid-range : | 150W rms, BASH® technology | | Treble : | 100W rms, AB class | |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| |
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| | warning light : | Power on LED | |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| | Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | | transducer shielding : | Integral through cancellation magnets or by magnet design | | Box : | 7-1/2" (19mm) MDF panels | |
Finish :
|
Dark red natural veneering side panels, black body
| | Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | | Weight : | 24.2lb (11kg) |
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | | Max SPL: | 114 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, metal dome | | | Woofer: | 6.5" neo, ICC technology | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | combo XLR/Jack | | | Input sensitivity: | -6/+6 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1900 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| High frequencies: | 100 Watts | | | Low frequencies: | 200 Watts | | | Cooling: | convection | | | Connections: | vde | |
| CABINET |
|---|
| Cabinet Material: | die cast aluminum | | | Hardware: | orientation adjustable stand | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 370/14.5 mm/inch | | | Width: | 265/10.4 mm/inch | | | Depth: | 250/9.8 mm/inch | | | Net Weight: | 10.5/23 Kg/Lbs |
|
Μonitor 2 δρόμων-2ενισχυτών near field, woofer 5.25? SFG?, tweeter 1"
τιτανίου προσαρμοσμένο σε eos waveguide, 100WRMS για LF and
50WRMS για HF, 70Ηz?20kΗz +1/-2dΒ, >109dB SPL peak. XLR, RCA
inputs. Δυνατότητα πολλαπλών ρυθμίσεων και συνεργασία με JBL RMC
calibration kit. Μαγνητική θωράκιση. 7,7kg., (173W x 269H x 241D mm).
| ΤΙΜΗ ΤΕΜΑΧΙΟΥ
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
| Subwoofer |
|
| Number |
1 / 1 |
| Basket Ø |
7" (175 mm) / 7" (175 mm) |
| Voice coil Ø |
1.5" (38 mm) / 1.5" (38 mm) |
| Cone material |
Carbon / rohacell / glass / Carbon / rohacell / glass |
| Tweeter |
|
| Number |
1 |
| Type |
X-ART |
| Diaphragm area |
4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø |
2" (56 mm) |
| Velocity transform ratio |
4:1 |
| Diaphragm weight |
0.17 g |
| Built-in Amplifiers |
|
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Tweeter |
1 |
| Type |
A/B |
| Amp. power RMS / music |
50 W / 75 W |
| Control panel |
|
| Input Sensitivity |
-∞ to +14 dB |
| High Shelf EQ > 5 kHz |
±6 dB |
| Low Shelf EQ |
±6 dB |
| Tweeter gain |
±4 dB |
| Input connectors |
|
| Analog |
XLR / RCA |
| Location |
Rear |
| General data |
|
| Panel |
Front |
| Frequency response |
38 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz |
≤0.5 % |
| Long term output |
≥114 dB |
| Max. peak |
≥122 dB |
| Crossover frequencies |
400 / 3000 Hz |
| Input impedance |
30 KOhm |
| Weight |
28.2 lb (12,8 kg) |
| Magnetically shielded |
Optional |
| Height x Width x Depth |
9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) |
| Warranty |
5 Years |
|
Ενεργό monitor (2 way active), 8.75 ίντσες υψηλής ευκρίνιας , χαμηλής παραμόρφωσης LF αισθητήρες, 1 ίντσα θόλος τιτανίου, ferrofluid cooled tweeter, twin FR series ενισχυτές (150watt LF/100watt HF), passive radiator , articulate bass extension μέχρι 35Hz, balanced XLR/TRS και unbalanced RCA εισόδους, THX pm3™ για surround sound εφαρμογές.
High resolution Active studio reference monitorUltra-linear frequency response for accurate mix translation8.75-inch high-precision, low-distortion LF transducer1-inch titanium dome, ferrofluid cooled tweeterOptimized Waveguide for wide, even sweet zoneTwin FR Series amps — 150W for LF / 100W for HFCast aluminum Zero Edge Baffle™ minimizes diffractionFull internal damping eliminates midrange artifactsPassive radiator provides tight, articulate bass extension down to 35HzAcoustic Space, LF roll-off, and HF controlsBalanced XLR, TRS, and unbalanced RCA inputsOmniMount™ ready for easy wall/ceiling placementTHX pm3™ certified for surround sound applicationsPerfect for High-Definition audio, cinema and gaming systemsΔιαστάσεις (HxWxD) 425x 273x290mm.Bάρος 15,7kg. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.