| Content |
Premium ενισχυτής ακουστικών με DAC mode, χρησιμοποιεί τα κυκλώματα Hi End της σειράς Premium. Το HD-DAC1 μπορεί να οδηγήσει ακόμη και audiophile ακουστικά υψηλής αντίστασης 600 Ohm. Με το DAC (CS4398) Premium quality εξόδους RCA, μπορεί να συνδεθεί απευθείας στο Hi Fi σας ενισχυτή ή με ένα ζευγάρι ενεργά ηχεία. Έχει Οπτική- Ψηφιακή έξοδο USB-B για απευθείας streaming από τον H/Y ή MAC. • Διαστάσεις: 250x270x90 χλστ. • Βάρος 5 kg, Διατίθεται σε μαύρο & ασημί/χρυσό χρώμα
This ultra-high quality dedicated Headphone Amplifier creates simply amazing sound because it uses Current Feedback amplification technologies from Marantzʼs high-end Premium 11 Series. Headphones have always added extra intensity to music, now with the Marantz HD-DAC1 that intensity reaches new climactic heights. This completely new product category comes with a new design, but as always with the unmistakable Marantz family resemblance.
The powerful HD-DAC1 can drive audiophile high-impedance headphones up to 600 ohm - with complete MODE ease. All thanks to its three-level gain control, Marantz HDAM-SA2 modules, a high current audiophile DAC (CS4398), and its Premium Quality fixed and variable RCA outputs. It is so powerful it not only drives headphones, you can also directly connect it to your Hi-Fi integrated amplifier or to a pair of active speakers or power amps. Itʼs also highly connectable.
Optical and coaxial digital inputs as well as a USB-B port enable you to stream music directly from your PC or MAC; iDevices can also be connected via the USB port on the front. For even more connectivity we have also included an analog input. The USB-B works in asynchronous mode to support not only 192 kHz / 24bits high-resolution audio but also the DSD 2.8MHz and 5.6MHz for maximized performance and the most direct way to enjoy excellent quality. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of a high frequency noise being generated by the computer when entering the HD-DAC1. We even included a jitter remover and Dual Clock for extreme accuracy. Info on volume, input, resolution, etc. is shown on the stylish Marantz Porthole Display. The solid aluminum front is supported by a double layer bottom plate and retro-style side panels. Pure craftsmanship.
| Standby Consumption in W | 0.3 |
| Maximum Dimensions (W x D x H) in inches | 9.84 x 10.63 x 3.54 |
| Μίνι ενισχυτής ακουστικών για κιθάρα με τεχνολογία analog modeling εξομοίωσης με κύκλωμα AC30 Top Boost. Είσοδος AUX για σύνδεση με εξωτερική πηγή ήχου. Λειτουργία με 2xAAA μπαταρίες. |
Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.
In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.
The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.
Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.
The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.
| Behringer HA-400 Ultra-Compact 4-Channel Stereo Headphone Amplifier
Mini to the max! You can use this super-compact stereo headphone amplifier with practically all headphones?four of them at the same time, to be exact! For example, you can let up to 4 different people in your studio listen to the main mix while the recording is being made, and each listener can determine his own volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance?these are the same op amps found in ?full-size? audio equipment?plus, a DC 12-Volt adapter is included.
If you are one of those musicians who like to deck out their equipment with lots of bells and whistles, the HA400 definitely makes a great addition to the functionality of your studio.
The Behringer HA400 offers flexible amplification for up to 4 headphones. Whether you're tracking a full band, playing to a backing track, or just listening to your mix, this compact amp gives every performer diverse volume control.
Hear everything with clarity. The HA400 promises high audio quality with zero interference, no matter what headphones you use. Behringer are relied upon by professional musicians everywhere. With the HA400 headphone amplifier, you'll become a part of 50+ years of innovation and expertise.
The Highest Quality Monitoring Possible
Great monitoring is at the heart of a tight performance. Whether you're on stage or in the studio, the HA4000 delivers ultimate control for everyone playing. Discover the highest quality audio from 4 high power, stereo amplifiers. Even at maximum volume, this tidy headphone amp provides clear sound without muddiness or unwanted noise.
Industry Leading Standard
There's a reason why Behringer are leaders in their field. With 50+ years of industry experience, they've built a legacy around exceptional build quality and innovative design. The HA4000 is no exception. Every channel preserves the original sonic qualities of your input signal. That's performance you can trust.
Features
- Ultra-compact headphone amplifier
- Ideal for stage or studio use
- Full control for every channel with 4 independent stereo high-power amplifier sections
- Extremely high audio quality with virtually all types of headphones, even at maximum volume
- 12V DC power adapter included
- Designed and engineered by Behringer in Germany
Specifications
Line Inputs
-
-
- Type: 1/4'' TS Jack, Stereo
- Impedance: 100kohms
- Max. input level: +15dBu
Headphone Outputs
-
-
- Type: 1/4'' TRS Jacks, Stereo
- Impedance: Approx. 80ohms
- Max. output level: Approx. 40mW in 100ohms
Power Supply
-
-
- Power supply: External power supply 12V
Dimensions/Weight
-
- Dimensions: 47mm (H) x 57mm (W) x 104mm (D)
- Weight: 0.32kg
|
Αρίθμός Εισόδων 1
Τύπος Εισόδων 1 x TS / 1 x RCA
Αριθμός Εξόδων 4
Τύπος Εξόδων 4 x 1/4'' stereo
Απόκριση Συχνότητας 20 Hz - 20 kHz (+0 dB, -1.5 dB)
Λόγος Σήματος Προς Θόρυβο 100 dBA
Μέγιστη Στάθμη Εισόδου
Μέγιστη Στάθμη Εξόδου 2 x 1.5 W @ 8 Ohm
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.