| Content |
O Master Audio MV1100CR είναι ένας ενισχυτής εγκαταστάσεων με ενσωματωμένο MP3 player και FM tuner.
Τεχνικά Χαρακτηριστικά:
-
Ενισχυτής εγκαταστάσεων με ενσωματωμένο MP3 player και FM tuner
-
Ισχύς εξόδου 60W RMS
-
Μπορεί να λειτουργήσει και με ηχεία 70/100V και με ηχεία 4/16Ω
-
Έλεγχος έντασης για 6 ανεξάρτητες ζώνες
-
Οθόνη για έλεγχο του tuner και των συσκευών USB / SD που θα συνδεθούν στη συσκευή
-
3 είσοδοι μικροφώνου, 3 είσοδοι auxiliary
-
1 έξοδος auxiliary
-
Ανεξάρτητος έλεγχος έντασης και tone (μπάσα και πρίμα), λειτουργία σίγασης (mute)
-
Διαθέτει κύκλωμα προστασίας από βραχυκύκλωμα
-
Περιλαμβάνει και ασύρματο τηλεχειριστήριο
-
Διαστάσεις 48 X 30 X 8,8 cm
|
Ενισχυτής ανακοινώσεων 250W. 24 ζωνών ψηφιακός, 24 έξοδοι επιλεγμένες με διακόπτη με ενσωματωμένο δέκτη FM, 1 CDP. 22 kg.
|
POWER AMP
| |
Rated Output
|
120W + 120W
| |
Input Sensitivity
|
-10dBV / 10kΩ
| |
S/N
|
Better than 75dB
| |
Frequency Response
|
100Hz-18kHz
| |
MIC/LINE 1~5CH
| |
MIC Input Sensitivity
|
-55dBV / 10kΩ
| |
MIC S/N
|
Better than 55dB
| |
MIC Frequency Response
|
120Hz-10kHz
| |
MIC T.H.D
|
Less than 0.5%
| |
LINE Input Sensitivity
|
-10dBV / 10kΩ
| |
LINE S/N
|
Better than 65dB
| |
LINE T.H.D
|
Less than 0.3%
| |
CD
| |
S/N
|
Better than 80dB
| |
Frequency Response
|
100Hz-20kHz
| |
TUNER
| |
S/N
|
Better than 60dB
| |
Frequency Response
|
120Hz-12kHz
| |
Power Consumption
|
170W (1/8 Power)
| |
Weight
|
16kg/35.3lb
| |
Dimension
|
482(W)x177(H)x373(D)mm/19(W)x7(H)x15(D)in
|
|
Specifications | Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
| | Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) |
100 dB
| | Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
| | Input Stage |
Input is electronically balanced and employs
precision 1% resistors
| | AC Line Current |
CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
| | Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
| | Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
| Load impedance (note: safe with all types of loads)
Dual
Bridge mono |
2–8 ohms
4–16 ohms
| | Voltage Gain (at 1 kHz, 8 ohm rated output) |
CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
| | Sensitivity (at 8 ohm rated output) |
1.4V
| | Maximum Input Signal |
+22 dBu typical
| | Operating Temperature |
0° C to 40° C at 95% relative humidity (non-condensing)
| | AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V-240V, 50/60 Hz
| | Ventilation |
Flow-through ventilation from front to back
| | Cooling |
Heat sinks and proportional-speed fan
| | Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
| | Net Weight, Shipping Weight |
19 lb (8.6kg), 22 lb (10.0 kg)
| |
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 33 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Ενισχυτής 5 μεγαφωνικών ζωνών, 240W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd, pam tuner, βάρος 19 kg. Kατάλληλος για ναούς, ξενοδοχεία, καταστήματα κ.λ.π.
|
|
PAM-510
|
PAM-520
| |
Amplifier Section
(Amp In@1kHz,
4Ω Load Output)
|
Rated Output Power (THD 1%)
|
120W(RMS)
|
240W(RMS)
| |
Speaker Zone 1~5 Output
|
25W MAX
|
50W MAX
| |
Input Sensitivity/Impedance
|
1V/20kΩ
| |
S/N
|
Better than 85dB
| |
Frequency Response
(at 1kHz Half Power Output, ±3dB)
|
80Hz~18kHz
| |
Mic Input Section
(Mic 1~4 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–60dBV/600Ω
| |
S/N
|
Better than 55dB
| |
Frequency Response (±3dB)
|
120Hz~10kHz
| |
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
| |
Phantom Power
|
+24VDC
| |
Line Input Section
(Line 1~2 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–30dBV/10kΩ
| |
S/N
|
Better than 65dB
| |
Frequency Response (±3dB)
|
80Hz~15kHz
| |
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
| |
Remote Amp Section
(Remote In@1kHz,
Preamp Out)
|
Mic Input Sensitivity/Impedance
|
–60dBV/600Ω
| |
S/N
|
Better than 55dB
| |
Frequency Response (±3dB)
|
120Hz~10kHz
| |
Tel In Section
(Tel In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
0.3V/600Ω(USA/Canada)
| |
0.775V/600Ω(EC & Associated)
| |
S/N
|
Better than 65dB
| |
Frequency Response (±3dB)
|
330Hz~3kHz
| |
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)
|
0dBV/600Ω
| |
|
T.H.D
|
Less than 0.5%
| |
Record Out
|
–10dBV/3kΩ
| |
Operating Temperature
|
–10°C~40°C
| |
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
| |
Power Consumption (1/8 POWER)
|
180W
|
320W
| |
Weight
|
17kg/37.6lb
|
19kg/42lb
| |
Dimensions
|
482(W) x 132(H) x 398(D)mm
19(W) x 5.2(H) x 15.7(D)in
| |
※ Specifications and design subject to change without notice.
|
|
XV Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile,
dynamic and extremely rugged according to IEC286-3. For the
highest requirements in safety and quality.
Sequential power on, alive contacts and incorporated ground fault
detection - the XV is the solution under all conditions. Without the
need for additional equipment. For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers
in the XV series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 1600: 2x 800 W / 100 V
Class: AB
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans(temp. reg. variable speed)
Weight: 39 kg
Dimensions: 3 RU / 483 x 88 x 382 mm(19" x 3.5" x 15 |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.