MC2 Audio T1500 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2×1025 4ohm + Euro lead

1,250.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: T1500 Κατηγορία:
Number of Channels: 2 Output Power: (per channel) 8 ohms     575W 4 ohms  1025W 2 ohms  1750w Output Power: (bridged) 8 ohms 2050W 4 ohms 3500w THD%: (@1dB below max output) @ 1kHz 

 

Διαβάστε περισσότερα

Number of Channels: 2

Output Power: (per channel)

8 ohms     575W
4 ohms  1025W
2 ohms  1750w

Output Power: (bridged)

8 ohms 2050W
4 ohms 3500w

THD%: (@1dB below max output)

@ 1kHz 

Βάρος 19.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “MC2 Audio T1500 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2×1025 4ohm + Euro lead”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

MC2 Audio T1500 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x1025 4ohm + Euro lead removeINTER-M DPA-1200S ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 1Χ1200W/100V PRIORITY IN. removeRCF HC 3200 HIGH CURRENT STEREO POWER AMPLIFIERS 3200W 2 IN removeDYNACORD DSA-8212 ΔΙΚΑΝΑΛΟΣ ΕΝΙΣΧΥΤΗΣ 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω removeMC2 Audio E25 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x1350W 4ohm 230V removeDYNACORD LX-3000 Power Amplifier 2x1500 Watts remove
NameMC2 Audio T1500 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x1025 4ohm + Euro lead removeINTER-M DPA-1200S ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 1Χ1200W/100V PRIORITY IN. removeRCF HC 3200 HIGH CURRENT STEREO POWER AMPLIFIERS 3200W 2 IN removeDYNACORD DSA-8212 ΔΙΚΑΝΑΛΟΣ ΕΝΙΣΧΥΤΗΣ 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω removeMC2 Audio E25 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x1350W 4ohm 230V removeDYNACORD LX-3000 Power Amplifier 2x1500 Watts remove
Image
SKUT1500DPA-1200SHC3200E009305E25E009294
Rating
Price 1,250.00 με ΦΠΑ 24% 1,230.00 με ΦΠΑ 24% 1,460.09 με ΦΠΑ 24% 1,296.00 με ΦΠΑ 24% 2,295.23 με ΦΠΑ 24% 2,000.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Number of Channels: 2

Output Power: (per channel)

8 ohms     575W
4 ohms  1025W
2 ohms  1750w


Output Power: (bridged)

8 ohms 2050W
4 ohms 3500w


THD%: (@1dB below max output)

@ 1kHz 

Single digital (Class D) amplifier with switching power supply 1200W/70V/100V. Protection against overheating, overcurrent and short circuit output. Features & priority entry program (program override) for message playback emergency. Highpass filter OFF/200Hz/400Hz. Remote control function ON / OFF. Power Supply DC 24V, AC 220 ~ 240V 50/60Hz.

This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 1600 Watt rms 
Power output stereo 4Ω:2 x 1100 Watt rms 
Power output stereo 8Ω:2 x 700 Watt rms 
Power output bridged 4Ω:3200 Watt rms 
Power output bridged 8Ω:2200 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 102 dB 
Crosstalk:> 65 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:400:1 (8 W) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, temperature, direct current, short circuit, RFI 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:16 A 
Power Consumption:6500 W 
PHYSICAL SPECIFICATIONS
Height:132 / 5.19 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:29.5 / 65.03 Kg/Lbs 
SHIPPING INFORMATION
Package height:200 / 7.87 mm/inch 
Package width:575 / 22.63 mm/inch 
Package depth:555 / 21.85 mm/inch 
Shipping Weight:32.5 / 71.64 Kg/Lbs

 


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight19.50 kg3.00 kg32.50 kg17.70 kg12.00 kg8.70 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 19.50 kg
Βάρος 3.00 kg
Βάρος 32.50 kg
Βάρος 17.70 kg
Βάρος 12.00 kg
Βάρος 8.70 kg