Content |
The OM 5S is a moving magnet cartridge for general purpose application
OM 5S
The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OMs. A glance at any one of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.
If your tonearm is a standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.
A great match for your home system
Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application, and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.
Depending on your preference, styli for the OM 5 Series are easily interchanged and include :styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.
-
Channel balance at 1 kHz
2 dB
-
Output voltage at 1 kHz, 5cm/sec
4.5 mV
-
Channel seperation at 1 kHz
20 dB
-
Channel seperation at 15 kHz
12 dB
-
Frequency response 20 Hz - 20 kHz
20-20.000 Hz
-
Tracking ability at 315Hz at recommended tracking force
60 µm
-
Compliance, dynamic, lateral
20 µm/mN
-
Stylus type
Spherical
-
Stylus tip radius
R 18 µm
-
Tracking force range
1.5-2.0 g (15-20 mN)
-
Tracking force, recommended
1.75 g (17.5 mN)
-
Tracking angle
20°
-
Internal impedance, DC resistance
750 Ohm
-
Cartridge colour
Black/Black
-
Cartridge weight
incl. extra weight 5 g, excl. extra weight 2.5 g
-
Recommended load resistance
47 kOhm
-
Internal inductance
450 mH
-
Recommended load capacitance
200-500 pF
-
Replacement stylus
Stylus 5S
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
|
Κεφαλή πικάπ ιδανικό για μουσική και DJ δραστηριότητες, καθώς διαθέτει full-range απόκριση συχνότητας (20 to 22,000Hz), στρογγυλή βελόνα, high output και βάρος 18 gr.
|
Σώμα: Aluminium / Synthetic Resin
Τύπος: Dual Moving Coil
Πηνία: PCOCC
Cantilever: Duralumin
Έξοδος: 0.3 mV
Απόκριση Συχνότητας: 15Hz - 50KHz
Διαχωρισμός καναλιών: 30 dB
Ισορροπία καναλιών: 0.5 dB
Βάρος Ανάγνωσης: 1.8-2.2 gr (standard 2.0 gr)
Εσωτερική Αντίσταση: 10 Ω
Συνιστώμενη Αντίσταση: 100 Ω
Ενδοτικότητα: 10 x 10-6 cm/dyne
Βάρος: 6.9 gr
|
A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542: - Tracking ability at 315Hz at
recommended tracking force: 70 µm - Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
|
The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
TECHNICAL DATA |
| Output voltage at 1000 Hz, 5cm/sec. | 5,5 mV | Channel balance at 1 kHz | 1,5 dB | Channel separation at 1 kHz | 22 dB | Channel separation at 15 kHz | 15 dB | Frequency range at - 3dB | 20-22.000 Hz | Frequency response | 20-20.000 Hz + 3 / - 1 dB | Tracking ability at 315Hz at recommended tracking force | 70 µm | Compliance, dynamic, lateral | 20 µm/mN | Stylus type | Elliptical | Stylus tip radius | r/R 8/18 µm | Tracking force range | 1,6-2,0g (16-20 mN) | Tracking force, recommended | 1,8 g (18 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 1,3 kOhm | Internal inductance | 700 mH | Recommended load resistance | 47 kOhm | Recommended load capacitance | 150-300 pF | Cartridge colour, body/stylus | Black/Red | Cartridge weight | 7,2 g | Replacement stylus unit | 2M Red | |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.