PALMER MI EINS – Full Tube Guitar Amplifier 1W

Palmer EINS - Amazingly versatile!

Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.

The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.

• 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
• 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
• 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
• 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.

• Type: head
• technology: Tube
• class: A
• power: 1 W
• Inputs: 1
• input connectors: 6.3 mm Jack
• Input impedance: 1 M ohm
• outputs: 4
• output connectors: 6.3 mm Jack
• output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
• Channels: 1
• Indicators: Power
• controls: Level, Tone
• FX loop: no
• Power supply: 230 VAC
• Power consumption: 10 W
• preamp tubes: ECC83
• power amp tubes: ECC82
• rectifier: solid state
• cabinet material: sheet steel
• Cabinet / Housing surface: powder coated / anodized
• width: 206 mm
• depth: 128 mm
• height: 108 mm

Ενισχυτής τελικός STEREO 2x100W με λυχνίες (8x EL34), ανεξάρτητο Volume και Presence σε κάθε κανάλι.

Ενισχυτής κιθάρας HEAD 100W, 4 καναλιών με ψηφιακό προενισχυτή και 4xEL34 Power Amp valves, 4 Modulation εφέ, 3 Delay εφέ, reverb. Περιλαμβάνεται ποδοδιακόπτης.

• Power rating: 100W
• Preamp: Digital Natural Harmonic Technology
• Power amp tubes: 4 x EL34
• Preamp topologies: 16
• Modulation effects: Chorus, Phaser, Flanger, Tremolo
• Delay effects: Hi-Fi Analog, Tape, Multi
• Reverb: Independent custom voiced
• Midi Control: Midi in, Midi Thru
• Stompware controller: supplied
• Emulated line out: XLR
• Headphone out: 1/4" jack
• Line in: 1/4" jack
• Preamp: 1/4" jack
• Effects loop: Serial / Parallel -10dBV / +4dB with mix control
• Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm

Δικάναλη κεφαλή με λυχνίες στα 30 Watts. Καθαρό κανάλι με απίστευτη διαύγεια και πεντακάθαρο λαμπερό ήχο, σε όλο το φάσμα των αρμονικών συχνοτήτων και σε οποιαδήποτε ένταση. Το δεύτερο (dirty) κανάλι διαθέτει το shape control ποτενσιόμετρο, το οποίο όχι μόνο είναι το πιο εύχρηστο ως προς την διαμόρφωση του ήχου, αλλά κάνει τον χαρακτηριστικό αυτόν ήχο της Orange που κυριολεκτικά ισοπεδώνει στις μεσαίες συχνότητες. 

Μία απο τις πιο διαδεδομένες κεφαλές της Orange και όχι άδικα, αφού ο ήχος της είναι μοναδικός. Το τελικό αποτέλεσμα του ήχου που διαμορφώνεται με την τετράδα των λυχνιών EL84 που διαθέτει, μπορεί να χαρακτηριστεί το λιγότερο εντυπωσιακό. Το ξέσπασμα των λυχνιών καθώς οδηγούνται στο όριο του overdrive γίνεται αξεπέραστο. Δυνατότητα προσαρμογής του ενισχυτή με κλιμάκωση από 30, 15 ή 7 Watts αναλόγως των συνθηκών.

Χαρακτηριστικά :

• Ισχύς : 30, 15 ή 7 Watts
• Shape control, Dirty volume
• Δύο κανάλια
• 2 Band EQ (bass, treble) και gain control
• Foot switchable 
• Power amp: 4 XEL84 
• Preamp: 4 X ECC83/12AX7 
• FX Loop: 1 X ECC81/12AT7

Ενισχυτής κιθάρας JCM 900 HEAD 100W, με 3xECC83 Pre-Amp tubes και 4x5881 Power AMP tubes, 2 κανάλια, σειριακή FX λούπα.

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

• Product type: Amplifier
• Type: 2-channel
• Output power (1 kHz 4 ohms): 2 x 200 W
• Output power (1 kHz 8 ohms): 2 x 100 W
• Output power (1 kHz 8 ohms, bridged mode): 400 W
• Circuit concept: Class D dynamic
• Frequency response: 20 - 20,000 Hz
• THD:
• Voltage gain: 32 dB / 26 dB / 28 dB
• Input sensitivity: 0.68 V / 1.4 V / 1.2 V
• Protection: Soft-start, short-circuit, DC, overheating, overvoltage
• Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
• Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
• Line input connectors: 2 x XLR, 2 x 6.3 mm jack
• Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
• Cooling System: low-noise fan
• Power supply: switching power supply
• Power Consumption Full Load: 470 W
• Operating voltage: 115 V AC / 230 V AC (switchable)
• Width: 482 mm
• Height: 44 mm
• Depth: 244 mm