PALMER AUDIO PEINS MI EINS – Full Tube Guitar Amplifier 1W

250.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521143014
Installments calculation
CompareAdd to wishlist Submit Better Price
Palmer EINS – Amazingly versatile! Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the […]

 

Read more

Palmer EINS – Amazingly versatile!

Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique “HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.

The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.

  • 1: V1:ECC83 – V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
  • 2: V1:ECC83 – V2:ECC81: Louder than Variation “1“, quieter than the standard configuration, more gain, distorts a little more quickly.
  • 3: V1:ECC81 – V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
  • 4: V1:ECC81 – V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation “1“, distortion can be controlled very precisely.
  • Type: head
  • technology: Tube
  • class: A
  • power: 1 W
  • Inputs: 1
  • input connectors: 6.3 mm Jack
  • Input impedance: 1 M ohm
  • outputs: 4
  • output connectors: 6.3 mm Jack
  • output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
  • Channels: 1
  • Indicators: Power
  • controls: Level, Tone
  • FX loop: no
  • Power supply: 230 VAC
  • Power consumption: 10 W
  • preamp tubes: ECC83
  • power amp tubes: ECC82
  • rectifier: solid state
  • cabinet material: sheet steel
  • Cabinet / Housing surface: powder coated / anodized
  • width: 206 mm
  • depth: 128 mm
  • height: 108 mm
Weight 2.47 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PEINS MI EINS – Full Tube Guitar Amplifier 1W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PEINS MI EINS - Full Tube Guitar Amplifier 1W removeMARSHALL JVM-210H Guitar Amp Head 100 Watts removeMARSHALL 2245-01 JTM45 vintage 30W Guitar Amplifier REISSUE removeMARSHALL EL34 100/100 Dual MonoBloc Power Amp removeYAMAHA THR-100HD Dual Electric Guitar Head removeVOX NT50H-G2 GUITAR AMPLIFIER 50W 8Ω OR 16Ω remove
NamePALMER AUDIO PEINS MI EINS - Full Tube Guitar Amplifier 1W removeMARSHALL JVM-210H Guitar Amp Head 100 Watts removeMARSHALL 2245-01 JTM45 vintage 30W Guitar Amplifier REISSUE removeMARSHALL EL34 100/100 Dual MonoBloc Power Amp removeYAMAHA THR-100HD Dual Electric Guitar Head removeVOX NT50H-G2 GUITAR AMPLIFIER 50W 8Ω OR 16Ω remove
Image
SKUPEINSJVM-210H2245-01EL34 100 100G070.00003NT50H-G2
Rating
Price 250.00 incl. GR VAT 1,240.00 incl. GR VAT 1,454.00 incl. GR VAT 1,700.00 incl. GR VAT 599.00 incl. GR VAT 525.63 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPalmer EINS - Amazingly versatile! Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard. The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
  • 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
  • 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
  • 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
  • 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
  • Type: head
  • technology: Tube
  • class: A
  • power: 1 W
  • Inputs: 1
  • input connectors: 6.3 mm Jack
  • Input impedance: 1 M ohm
  • outputs: 4
  • output connectors: 6.3 mm Jack
  • output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
  • Channels: 1
  • Indicators: Power
  • controls: Level, Tone
  • FX loop: no
  • Power supply: 230 VAC
  • Power consumption: 10 W
  • preamp tubes: ECC83
  • power amp tubes: ECC82
  • rectifier: solid state
  • cabinet material: sheet steel
  • Cabinet / Housing surface: powder coated / anodized
  • width: 206 mm
  • depth: 128 mm
  • height: 108 mm
The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the worldʼs guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar. Outstanding Tone The JVM Series uses a carefully designed, 4 x ECC83 pre-amp stage to generate the desired amount of gain, from the cleanest, yet complex, clean imaginable to a vast palette of overdrives that range from sophisticated and subtle to explosive and extreme. Boasting a truly amazing array of instantly switchable sounds, overflowing with harmonically rich tones and responsive fluidity, every JVM mode exudes that unmistakable Marshall sound and expands on it, effectively offering multiple Marshalls in one easy-to-use package. Ultimate Flexibility Each totally independent JVM channel offers three footswitchable modes which progressively add gain while offering a complimentary tonal topology, making the JVM the perfect amplifier for any situation. Seamless, Silent Switching Ultimate Control and Connectivity Every JVM is supplied with a fully programmable footswitch. This revolutionary, patent-pending technology allows single front panel switching (SWITCH STORE) or entire set-ups (PRESET STORE – Channel/Mode, Reverb, FX Loop, Master Volume) to be simply assigned to any footswitch . . . or, even cooler, a mix ʽnʼ match of both modes. Housed in a rugged metal casing with blank panels on its surface which allow the user to label the pedal exactly as they want, the JVM pedal has no restrictive factory set-ups or functionality barriers, plus itʼs a breeze to program. The multi-coloured LEDs reflect every front panel switch status so you know exactly where you are, in the heat of a performance, without the need to glance at the amplifier itself. The JVMʼs MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up, allowing you to store and recall 128 amplifier set-ups and enabling your MIDI effects board to easily control the amp. With its built-in memory and switching options the possibilities are endless! Studio-Quality Reverb Effective Control Each JVM boasts two FX Loops that live on its rear panel. A footswitchable Parallel/Series Loop with Level and Mix controls plus a Series Loop with a Bypass switch. Combine the JVM with a MIDI FX processor and a MIDI footswitch and the skyʼs the limit! The Tone of the Cone In the case of the 2x12 in. JVM combos, after exhaustive testing of every speaker available, all agreed that the pairing of a Marshall/Celestion ʽHeritageʼ with a Marshall/Celestion ʽVintageʼ was the only way to go as the combination produces a fantastic depth and breadth of sound while maintaining a tight, musical response and a solid low-end thump. In the case of the 50 Watt 1x12”combo, a Celestion G12B delivers a full, wide sound that is much "bigger” than the JVM215Cʼs compact size would suggest. Every JVM is made at the Marshall factory in the heart of England. Time-tested craftsmanship and construction are combined with the latest advances in manufacturing technology, ensuring world-class build quality and roadworthiness. Internally, the JVM circuitry and layout has been kept as simple and logical as possible, ensuring the integrity of the guitar tone and an incredibly low noise-floor for such a high gain beast. Four, double-sided PCBs are used and connections are kept to a minimum to ensure maximum reliability. Only the best components are used to ensure very high quality and all of the internal wiring and amplifier assembly is performed by hand. Strict quality controls ensure every unit made is worthy of the world-renowned and respected white script Marshall logo. Meticulous valve selection adds further to the all-important tone and reliability that are both synonymous with the Marshall legend. Technical Info Output (RMS): 100 Watts Speakers: No Pre-amp Valves: 4 x ECC83 Power Amp Valves: 1 x ECC83, 4 x EL34 Footswitch (Supplied): PEDL-00045 Dimensions (Millimeters): 750 x 310 x 215 Weight: 22 kg, 48.5 lbs

Marshall 2245-01 30W Guitar Amplifier

When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.


Model Name JTM45 (2245)
Series Vintage Reissue
Tubes 3 ECC83 (Preamp), 2 5881 (Power Amp)
Output 30 Watts
OHMS 16
Speakers n/a
Effects n/a
Covering Black Vinyl
Footswitch n/a
Dimensions 660x260x205mm
Weight 14.6kg

Marshall 50 Watt and 100 Watt, EL34 driven, valve power stages are, in the minds of many, the 'industry standard'. As soon as you hear Marshalls 50 Watt + 50 Watt, EL34 50/50 and the 100 Watt + 100 Watt, EL34 100/100 valve power amps, you will immediately understand why. Both of these eye catching units are packed with Marshall valve tone. Just like expensive hi-fi amps, both the EL34 50/50 and EL34 100/100 are Dual MonoBloc amplifiers - meaning that each side (channel) of the stereo amplifier operates as a completely independant unit. Each channel features its own Gain and Presence controls and our highly specialised 'True Differential Inverter' circuitry, ensures that the maximum integrity and pureness of their valve tone is maintained. Each channel also boasts a remotely switchable 'Voice' switch which takes you from 'traditional' (Voice A) to 'modern'(Voice B) and will allow you to cut through any mix, The Marshall EL34 50/50 and Marshall EL34 100/100 - professional, all-valve power amps that sound as good as they look!

 

Get ready to experience a whole new level of tone creation. THR100H Dual packs true dual-amp functionality into a single 5kg package. Both amps feature five custom-voiced amp types with natural, organic overdrive, Yamahaʼs new ultra-dynamic power amp with selectable output tube simulations and selectable class A or A/B topology, independently assignable boosters, reverbs and IR speaker simulators, as well as selectable single or true dual-discrete inputs for genuine dual-path connectivity.

Power: Single Amp: 100W (8/16Ω) 50W (4Ω), Dual Amp: 100W (50W+50W)
Channels: 1
Equalizer: Yes
Inputs: INPUT I (1/4" Phone), INPUT II (1/4" Phone)
Outputs: PHONES (1/8" Mini Stereo), FOOTSWITCH (5pin DIN), EFFECT LOOP SEND/RETURN (Stereo 1/4" Phone), SPEAKER OUT 1 (1/4" Phone), SPEAKER OUT 2 (1/4" Phone), LINE OUT I (XLR), LINE OUT II (XLR), AC IN Jack
Effects: BOOSTER (*White/Amber/Green), REVERB (*Hall/Room/Plate/Spring), NOISE GATE (*OFF/1/2/3), FX LOOP (*PARALLEL/SERIAL), SPEAKER SIMULATION (*Impulse Response) *Only selectable in the THR HD_H Utiity
Valves: EL34, 6L6GC, KT88, EL84, 6V6
Foot-switch: Yes ( Optional )
Controls: POWER, AMP SELECT, BOOSTER x2, AMP TYPE, BOOSTER, GAIN, MASTER, BASS, MIDDLE, TREBLE, PRESENCE, REVERB, LEVEL
FX Loop: Yes
Dimensions ( W x H x D ): 44,5 χ 24,8 χ 12,5 cm
Weight: 4,1 kg

 

Info

NT50H-G2 Features: - Output Power: 50 Watts RMS into 8Ω or 16Ω. - Tube Complement: Preamp: 12AX7 (x3) Power amp: EL34 (x2) - Inputs/Outputs: Guitar input, FX Loop (Send/Return), D.I. Out, Foot switch, 1 x Speaker output (16 Ω), 1 x Speaker output (8 Ω) / 2 x Speaker output (16Ω). - Controls: Master Volume, BRIGHT/GIRTH channel switch, Reverb, Tone Cut, THICK switch, GIRTH channel ? ?Volume, Bass, Middle, Treble, Gain?, BRIGHT channel - ?Bass, Middle, Treble, Gain?, THICK. - Dimensions (W x D x H): 450 x 165 x 215 mm / 17.72 x 6.50 x 8.46 inches. - Weight: 12.2 kg / 26.90 lbs. - Options: VFS2A footswitch. - Accessories: Power cable, High Performance VOX Custom Speaker Cable (16AWG).

Weight2.47 kg22.00 kg14.60 kg25.00 kg5.00 kg12.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.47 kg
Weight 22.00 kg
Guitar Amp Watts

Weight 14.60 kg
Weight 25.00 kg
Guitar Amp Watts

Weight 5.00 kg
Guitar Amp Watts

Weight 12.00 kg