SAMSON SERVO 600 3X300W POWER AMPLIFIER

The Servo 600 is ideal for larger applications where added power is needed to
drive multiple speaker chains, or larger format speakers.
The Servo amplifiers feature large 10-segment 3-color level LED meters and
independent channel volume controls. The rear panels include 1/4-inch balanced
and RCA input connectors, as well as 5-way binding post and 1/4-inch speaker
outputs. 4-stage power protection circuitry that ensures optimal performance
and protection of connected components. 
 
FEATURES:

300 watts per side at 4 ohms
600 watts bridged mono at 8 ohms
1/4-inch and RCA input connectors
5-way binding post and 1/4-inch outputs
Dual Rack space design
10-segment, 3-color Level LED meters
4-stage power protection circuitry 

Νέας γενιάς τελικός επαγγελματικός ενισχυτής υψηλών απαιτήσεων. Παρέχει μεγάλη ισχύ εξόδου και υψηλή ποιότητα ήχου.  Χρησιμοποιώντας την επόμενης γενιάς τεχνολογία EEEngine, ο ενισχυτής έχει έως 40% μεγαλύτερη απόδοση και χαμηλότερη εκπομπή θερμότητας από συμβατικές τεχνολογίες ενισχυτών. Έχει διπλούς ανεμιστήρες ψύξης με αυτόματα ρυθμιζόμενη ταχύτητα για απόλυτη ψύξη. Διαθέτει θήρα για σύνδεση σε ψηφιακό δίκτυο CobraNet και θύρα για σύνδεση και έλεγχο λειτουργίας με surveillance system. Απόκριση συχνότητας 10 Hz – 40 KHz. Ισχύς 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Βάρος 12,5 κιλά.

Τελικός ενισχυτής, ισχύς 2x280W @8ohms, 2x450W @4ohms, limiter, Jack in, speakon / binding post out, 2U, 482x88x415mm, 16 Kg.

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

• Rack mount stereo powered monitor speaker system
• New AES/EBU digital input
• lndependent MUTE function
• Sophisticated control panel section
• Ideal where space is at a premium

• Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
• AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
• Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
• Independent MUTE function by holding down CH SEL key for a while.
• Auto Mute when powering on*.
• D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
• Multi-voltage power supply.

Speaker Section

• Unit: 110 x 40mm cone type, magnetically shielded, x 2
• Impedance: 8 ohms
• Output SPL: 84 dB/W (1m)
• Frequency response: 200Hz to 20kHz

Amplifier Section

• Rated output power: 10W or more (8 ohms, 1kHz)
• Residual noise: -60 dBV or less (DIN AUDIO)
• Distortion: 0.5% or less (10W / 4 ohms, 1kHz)

Digital input

• Connector: XLR-3-31 type
• Digital input Format: IEC60958 (AES/EBU)
• Digital inputSampling frequency: 44.1kHz to 96 kHz
  

Analog input

• Connector: XLR / 1/4" combi-jack
• Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
• Analog input Input impedance 10k ohms or more

Phones

• Connector: 1/4" stereo jack
• Applicable load imp. 8 ohms or more
• Rated output power 20mW + 20mW (32 ohms, 1kHz)

General

• External dimensions: 430(W) x 44(H) x 282(D) mm
• Weight: Approx. 3.5kg
• Power requirement: 100 - 240V~, 50/60Hz
• Power consumption: 10W

Τελικός ενισχυτής 2U ισχύος 2 Χ 500 Watt/4Ω με απόκριση συχνότητας 20Hz - 20KHz. Βάρος 15 Kg. Διαθέτει ρύθμιση ευαισθησίας εισόδου (0,775V/1,0V/1,44V), Limiter και φίλτρα Low pass & High pass για σύνδεση με sub ή δορυφόρο. Διαθέτει εισόδους balanced XLR/JACK και εξόδους ηχείων σε Speakon & Binding post