Content |
Η τεχνολογία VSS3-reverb που έχει ενσωματωθεί στο Μ3000 αποτελεί πλέον μέτρο σύγκρισης στη μουσική βιομηχανία. Το Μ3000 περιλαμβάνει μερικά από τα πιο εύχρηστα, ποιοτικά και ευέλικτα reverbs για μουσική και ταινίες στην αγορά. Συνδυάζοντας τον απόλυτο έλεγχο στα early reflections με τη διαφάνεια και τις τέλειες αρμονικές στον ήχο του βάθους, η τέχνη του reverberation ανεβαίνει σε νέα επίπεδα.
Με διπλή μηχανή που επιτρέπει στη ταυτόχρονη χρήση 2 reverbs ή εφέ, βραβευμένο user interface, 600 factory presets και πολλαπλές εισόδους και εξόδους, το Μ3000 είναι μια από τις καλύτερες επιλογές για επαγγελματικού επιπέδου reverb.
Technical Specification
Digital Inputs and Outputs
Connectors XLR (AES/EBU)
RCA Phono (S/PDIF)
Optical (Toslink, ADAT)
Formats AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958,
EIAJ Optical (Toslink), ADAT Lite pipe
Output Dither HPF TPDF dither 8-24 bit
Word Clock Input RCA Phono, 75 ohm, 0.6 to 10 Vpp
Sample Rates 44.1 kHz, 48 kHz
Processing Delay 0.2 ms @ 48 kHz
Frequency Response DIO 20 Hz to 23,9 kHz +0,01/-0,1 dB @ 48 kHz
Analog Inputs
Connectors XLR balanced (pin 2 hot)
Impedance 20 kohm
Max. Input Level +22 dBu (balanced)
Min. Input Level (for 0 dBFS) -10 dBu
Sensitivity @ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion 24 bit (1 bit, 128 times oversampling
A to D Delay 0.8 ms @ 48 kHz
Dynamic Range >103 dB (Unweighted), >106 dB (A)
THD -95 dB (0,0018 %) @ 1kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response 10 Hz to 20 kHz: +0/-0.2 dB
Crosstalk 100 dB (unweighted), >104 dB(A)
THD -86 dB (0.005%) @ 1 kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response 10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk |
DBX-166XL
Compressor - limited- gate /expander 2 εισόδων κύκλωμα overeasy,
peakstopplus, είσοδοι- έξοδοι XLR κατάλληλος για studio & live χρήση.
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications Input Connectors | 1/4" TRS, female XLR (pin 2 hot) | Input Impedance | >50kΩ balanced, >25kΩ unbalanced | Max Input | >+24dBu, Balanced or Unbalanced | Input Type | Electronically balanced/unbalanced, RF filtered | Sidechain | 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) | Sidechain Impedance | Tip = >10kΩ (Input), Ring = 2kΩ (Output) | Sidechain Max Input Level | >+20dBu (tip/input); >+20dBu (ring/output) | Output Connectors | 1/4" TRS, female XLR (pin 2 hot) | Output Impedance | 120Ω balanced, >60Ω unbalanced | Max Output | +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) | Frequency Response | 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain | Noise | |
|
The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4's Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative.
FEATURES:
4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty
|
DBX ZONEPRO 641
Όμοιο με το 640 αλλά έλεγχος και ρύθμιση μόνο μέσω pc.
|
Γραφικό equalizer 1/3 της οκτάβας, 2x31 περιοχών. Επιλεγόμενο εύρος αυξομείωσης 6/15dB, φίλτρο Bessel αποκοπής χαμηλών συχνοτήτων στα 40Hz με 18dB ανά οκτάβα. Hλεκτρονικά ισορροπημένες (balanced), unbalanced και RF φιλτραρισμένες είσοδοι και έξοδοι με XLR, TRS jacks και γυμνών επαφών, 3U.
1231 Dual 31-Band Graphic Equalizer
The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.
SPECIFICATIONS:
INPUT
|
Connectors:
|
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
|
Type:
|
Electronically balanced/unbalanced, RF filtered
|
Impedance:
|
Balanced 40 kOhm, unbalanced 20 kOhm
|
Max Input Level:
|
>+21dBu balanced or unbalanced
|
CMRR:
|
>40dB, typically >55dB at 1kHz
|
OUTPUTS
|
Connectors:
|
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
|
Type:
|
Impedance-balanaced/unbalanced, RF filtered
|
Impedance:
|
Balanced 200 ohm, unbalanced 100 ohm
|
Max Output Level:
|
>+21dBu balanced/unbalanced into 2 kOhm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
|
SYSTEM PERFORMANCE
|
Bandwidth:
|
20Hz to 20kHz, +0.5/-1dB
|
Frequency Response:
|
50kHz, +0.5/-3dB
| |
+/-15dB range
|
+/-6dB range
|
Dynamic Range:
|
109dB
|
115dB
|
Signal-to-Noise:
|
90dB
|
97dB
|
THD + Noise:
|
| |
DPR-504 Νoise gate τεσσάρων καναλιών |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.