| Content |
- For rack mounting
- Measures the decibel level of the sum signal
- Produces interesting lighting in your amplifier rack
- LED indicator changes from green to yellow
- Sensitivity adjustment for right and left channel
- 2 Separate LED modes: dot and bar
- Demo mode for activating the LED without audio signal
- High level inputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
- High level outputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
- Power consumption: 10 W
- Dimensions (L x W x H): 483 x 44.5 x 44.5 mm
- Weight: 0.85 kg
- Includes power supply unit 12 V DC 500 mA
|
DIGILYZER Φορητό όργανο έλεγχου ψηφιακών συστημάτων
Audio/Video related, condumer/professional 8-16BIT, συχνότητα δειγματοληψία
32-96 kHz, είσοδοι AES-3/SPDIF/TOS LINK/ADAT INTERFACE. Απεικόνηση
μετρήσεων σε μεγάλη LCD οθόνη, ενσωματωμένο ηχείο, έξοδος ακουστικών,
λειτουργεί με 3 ΑΑΑ μπαταρίες (+DC IN) βάρος 300gr. Εκτελεί μετρήσεις LEVEL
-FS/LEVEL RMS/SIGNAL, FREQ/THD+N/FREQ. SWEEP/PPM/SCOPE/CRC/
OVERLOAD DETECTION/FULL SCALE DETECTION. Επίσης SAMPLING FREQ
/CARRIER LEVEL/CHANELL STATUS κ.α. | With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through“, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics.
SPECIFICATIONS:
- Input: 2 x XLR/f balanced
- Nominal impedance: 200 Ω
- Output 1 x XLR/m balanced
- Load impedance >200 Ω
- Symmetrically decoupled through resistors
- Total ohmic value: 200 ohms
- Typical attenuation: 6 dB
- Housing: metal casing 110 x 73 x 42 mm
|
- Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
- Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
- Super-easy operation with intuitive LED display
- Continuity check and intermittent contact detection
- Phantom-power and ground-shield check
- Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
- Operates with 2 AA size batteries (not included)
- Designed and engineered in Germany
|
Συσκευή ελέγχου καλωδίων, διαθέτει βύσματα: ΝΕUTRIK, SPEACON, XLR-3, XLR-5,
DIN-5, DIN-6, 3mm JACK και BNC, με διακόπτες επιλογής αυτόματου ή manual
διακόπτη και φωτεινές ενδείξεις. Λειτουργεί με μπαταρία PP3 9V συμπεριλαμβάνονται:
θήκη προστασίας και 2 καλώδια ελέγχου κοντά.
|
MINI SPL
1/2" μικρόφωνο μετρήσεων ακρίβειας για χρήση με το minilyzer |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.