Content |
the t.racks Phase Checker Phase Tester
- For checking acoustic transducers (loudspeakers, microphones) as well as electrical audio accessories
- Consists of a signal generator and a detector
- Generator with acoustic and electrical output
- Output level adjustable
- Detector with acoustic and electrical input (Mic int./Line in / Mic ext switchable)
- LED display
- Power supply (per device): 1x 9 V battery (not included)
|
DIGILYZER Φορητό όργανο έλεγχου ψηφιακών συστημάτων
Audio/Video related, condumer/professional 8-16BIT, συχνότητα δειγματοληψία
32-96 kHz, είσοδοι AES-3/SPDIF/TOS LINK/ADAT INTERFACE. Απεικόνηση
μετρήσεων σε μεγάλη LCD οθόνη, ενσωματωμένο ηχείο, έξοδος ακουστικών,
λειτουργεί με 3 ΑΑΑ μπαταρίες (+DC IN) βάρος 300gr. Εκτελεί μετρήσεις LEVEL
-FS/LEVEL RMS/SIGNAL, FREQ/THD+N/FREQ. SWEEP/PPM/SCOPE/CRC/
OVERLOAD DETECTION/FULL SCALE DETECTION. Επίσης SAMPLING FREQ
/CARRIER LEVEL/CHANELL STATUS κ.α. |
Cable tester για τον έλεγχο καλωδίων, διαθέτει περιστροφικό επιλογέα έξι θέσεων για έλεγχο έως και 5 pins καθώς και έλεγχο της εσωτερικής μπαταρίας, tester με led ενδεικτικά και buzzer με την χρήση banana connectors, ελέγχει speakon 4 επαφών, XLR (αρσενικό /θηλυκό) 3 επαφών, RCA, ΒΝC, MIDI (5-pin DIN), DMX (5-pin), 1/4? TRS.
This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.
We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair.
Features
- 6-position rotary selector with individual LEDʼs for up to five pins plus internal battery life check
- ʽBananaʼ connector continuity tester with beeper and LED indicator
- Super-rugged construction for durability and longer life
- (2) Speaker Twist connectors for testing of 4 pin->to pin connections
- (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
- (2) RCA Phono connectors for testing of 2 pin->to pin connections
- (2) BNC connectors for testing of 2 pin->to pin connections
- (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
- (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
- (2) 1/4” TRS connectors for testing of 3 pin->to pin connections
- (2) Banana connectors for testing of 1 pin->to pin connections
Specifications Power Requirements | 9V battery (Battery not included) | Dimensions | 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H) |
|
ACOUSTILYZER
Αnalyzer ήχου 1/1 ή 1/3 octave band resolution, το οποίο περιλαμβάνει
sound pressure levels, SPL/LEQ, full band & low freq mode, RT 60, delay
time, sti-pa, electrical level RMS
|
Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery.
A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
- 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
- 0.1dB resolution updated every 0.5 seconds
- Auto ranging or manual range selection
- ʽAʼ & ʽCʼ frequency weighting
- Fast or slow response filters
- 42mm LCD display with quasi-analogue bargraph and function Indicators
- Bargraph in 1dB steps updated every 40ms
- Max hold function to display the highest recorded value
- Min/max memory since power on or last reset
- Low battery indicator
- Auto power off
- Analogue output AC: 0.707 Vrms (at full scale)
- Supplied with battery
|
Συσκευή ελέγχου καλωδίων, διαθέτει βύσματα: ΝΕUTRIK, SPEACON, XLR-3, XLR-5, DIN-5, DIN-6, 3mm JACK και BNC, με διακόπτες επιλογής αυτόματου ή manual διακόπτη και φωτεινές ενδείξεις. Λειτουργεί με μπαταρία PP3 9V συμπεριλαμβάνονται: θήκη προστασίας και 2 καλώδια ελέγχου κοντά.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.