Content |
Ενισχυτής Public Address 120W/100V, 2 μεγαφωνικές ζώνες, 6 mic & 3 AUX input (2 stereo), rec out. (420W x 100H x 364D mm). Κατάλληλος για ναούς. Βάρος 12,6kg.
Specification |
| Power Source | AC mains 50/60Hz) | Output | 120W | Power Consumption | 258W (rated output), 105W (EN60065) | Frequency Response | 50 - 20,000Hz ±3dB | Distortion | Under 2% at 1kHz, rated power | Input | MIC 1 - 6: -60dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack
AUX 1 - 2: -20dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack
(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 - 4: -20dB*, 10kΩ, unbalanced, RCA pin jack
AUX 5: -20dB*, 10kΩ, unbalanced, combined type of XLR-3-31 equivalent and phone jack
PWR AMP IN: 0dB*, 600Ω, unbalanced, RCA pin jack
An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals) | Output | REC: 0dB*, 600Ω, unbalanced, RCA pin jack
LINE: 0dB*, 600Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance
(100V line/83Ω), individual selector key, M4 screw terminal
DIRECT SPEAKER OUT:
High impedance (100V line/83Ω),M4 screw terminal
Low impedance (4 - 16Ω), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.) | Phantom Power | ON or OFF for each MIC 1 - 6 with switch setting | S/N ratio
(Band Pass: 20 - 20,000Hz) | Over 100dB (Master volume: min)
Over 76dB (Master volume: max)
Over 60dB (MIC 1 - 4))
Over 53dB (MIC 5, 6)
Over 76dB (AUX 1 - 5) | Tone Control | Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz | Control Input | REMOTE VOLUME: M3 screw terminal
POWER REMOTE: No-voltage make contact input, open voltage: 24V DC (when the unit's power is OFF), short-circuit: under 10mA, M3 screw terminal | Indicator | 5 point LED output level meter,
Power indicator LED,
Zone indicator LED | Operating Temperature | -10ºC - +40ºC | Finish | Panel: ABS resin, black, hair line
Case: Steel plate, black | Dimensions | 420 (W) x 107.7 (H) x 367 (D)mm | Weight | 12.6kg | Accessory | Power cord x 1,
Terminal block cover x 1,
Terminal block cover mounting screw x 2 | Option | Rack mounting bracket: MB-25B,
Volume control cover: YA-920. | | Note* Note: Distance between barriers on the above screw terminals; M3 = 7mm, M4 = 9mm | | * 0dB = 1V |
Accessories
|
Μίκτης - ενισχυτής 6 μεγαφωνικών ζωνών ισχύος 240W ο οποίος μπροεί να τοποθετηθεί σε ικρίωμα (3U). Ικανοποιεί την ΕΝ60849 και την ΕΝ54. Επιτρέπει την εκπομπή μουσικής βάθους (BGM) αλλά και μηνυμάτων έκτακτης ανάγκης σύμφωνα με την ΕΝ60849. Οι ανακοινώσεις μπορούν να γίνουν τόσο από την κονσόλα RM-300MF όσο και από την ίδια την συσκευή. Διαθέτει βαθμίδα επιτήρησης η οποία ελέγχει το σύστημα αυτόματα για βλάβες.
Specification |
| Power Source | AC mains, 50/60 Hz DC: 24 V DC | Power Consumption | 600W | Rated Output | 240W | Frequency Response | 50 – 20,000 Hz, ±3dB (at 1/3 rated output) | Distortion | Under 0.8% (at rated output, 1kHz) | Signal-to-Noise Ratio | Over 85dB | Audio Input/Output
Characteristic | Sampling frequency: 48kHz
A/D D/A CONVERTER: 24bit | Input | Input 1 – 3 : -50 dB (MIC)/-10dB (LINE) (changeable) 600Ω, electronically balanced combined XLR connector (female)/phone jack
Input 4: -50 dB (MIC)/-10 dB (LINE) (changeable) 600Ω, electronically balanced plug in screw connector
BGM 1 – 2 : -10 dB, 10kΩ RCA pin jack
External AMP Input: 100V Line plug in screw connector | Output | Speaker output 1 – 2 : max (240w) per output
Speaker output 3 - 6 : max (120w) per output
Total with in 240W
Plug-in screw connector
Direct output : Direct output from internal or external amplifier
Plug-in screw connector
Recording output BGM / Paging : 0dB, 10kΩ, RCA pin jack | RM Link 1.2 in | 2 RJ45 female connector for connecting the RM-300MF/RM-200M
Remote Microphone.
Maximum distance: RM1.2 Total 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | Network I/F | RJ45 female connector for switching hub or PC
10 BASE-T/100 BASE-TX Circuit (Selectable by automatic negotiation)
Maximum distance: 100m between this unit and a switching hub or PC
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | VM Link | RJ45 female connector for connecting the VM-3240E or VM-3360E
Maximum distance : 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | EXT PA Link | RJ45 female connector for connecting the VP-2241 or VP-2421
Maximum distance : 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | General Control In: 1 – 8/Out: 1 – 8 | Plug-in screw connector
Input : No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 1 mA
Output : Isolated open collector output, withstand voltage: 30V DC, operating current: under 50 mA | Emergency Control In: 1 – 6/Status out | RJ45 female connector
Input 1 – 5 : No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2 mA
Connection resistance to make the function: Inactive; 9.4kΩ ±5%/Active; 4.7kΩ ±5%
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%
Status out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA | ATT Control | Plug In connector, relay contact, 30V DC, 125V AC 5A (AC/DC) | Power In/Out
PS Out/DC Power In | M4 Screw terminal distance between barriers 11 mm
This connector for connecting the VX-2000DS only
DC 28V/20A (operating range: 20 - 40V DC) | DC24V Output | 24V DC ±10% Maximum feeding current 0.4A | DS Link | RJ45 female connector for connecting the VX-2000DS
Maximum distance: 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | Dimensions | 482 (W) x 132.6 (H) x 460 (D)mm | Weight | 18kg | Option | Input transformer: IT-450 |
|
Crown CDi 2000 2x800W-4Ω Τελικός Ενισχυτής
Τελικός ενισχυτής με 2Χ1000W/2V, 2X800W/4Ω,2Χ800W/70V, δυνατότητα bridge λειτουργίας,εξελιγμένο τροφοδοτικό που επιτρέπει τη χρήση του ενισχυτή οπουδήποτε στον κόσμο LCD οθόνη ενδείξεων φωτιζόμενη στην εμπρόσθια πρόσοψη, με ενσωματωμένο επεξεργαστή DSP με έτοιμα preset για διάφορα ηχεία, EQ, limiting,compression, delay, crossover frequencies και subharmonic synthesizer. Είσοδοι balanced με phoenix connectors έξοδοι με barrier strip.Μεταβλητού βήματος ανεμιστήρες στο σύστημα ψύξης, με σύστημα προστασίας και ελέγχου 5 διαφορετικών σημείων, με 6 led ενδείξεων διαφόρων λειτουργιών Κατάλληλος για μόνιμες εγκαταστάσεις.
|
Ολοκληρωμένος ενισχυτής PA 120 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 10.8 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.
Specification |
| Power Source | 220 - 240V AC or 24V DC | Rated Output | 120W | Power Consumption | 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output) | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | Distortion | Under 1% at 1kHz,1/3 rated power | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | Phnatom Powe | DC + 21V (MIC 1) | S/N Ratio | Over 60dB | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | Indicator | Power signal, peak | Finish | Panel: ABS resin, black/Case: Steel plate, black | Dimensions | 420 (W) x 100.9 (H) x 360.3 (D) mm | Weight | 10kg |
|
Ενισχυτής Commerciall Audio 35w/8Ω/70V/100V με προενισχυτή 3 εισόδων-1 ζώνη εξόδου, είσοδος μικροφώνου/line balanced με δυνατότητα priority-2x unbalanced RCA inputs-Βass/Treble+Master Level-Preamp Line out. Υποδοχη σύνδεσης τηλεφώνου. Για χρήση σε καταστήματα, νοσοκομεία, σχολεία, εκκλησίες, εργοστάσια κλπ. Dip switches για ρύθμιση λειτουργίας εισόδων. Διαστάσεις: ½ πλάτος rack-ύψος 2URack-Βάθος 35cm.
|
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 600: 2x 300 W / 100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 19 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.