Price | €1,440.26 Original price was: €1,440.26.€1,186.00Current price is: €1,186.00. incl. GR VAT | €1,193.61 Original price was: €1,193.61.€1,075.00Current price is: €1,075.00. incl. GR VAT | €1,357.05 Original price was: €1,357.05.€1,085.64Current price is: €1,085.64. incl. GR VAT | €1,452.00 Original price was: €1,452.00.€1,150.01Current price is: €1,150.01. incl. GR VAT | €2,334.34 Original price was: €2,334.34.€1,890.82Current price is: €1,890.82. incl. GR VAT | €1,000.00 Original price was: €1,000.00.€975.00Current price is: €975.00. incl. GR VAT |
Content | Crown XTi 4002 Features at a Glance:
* Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms
* Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms
* Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
* Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
* 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
* New system monitoring provides software visibility of AC line voltage and power supply temperature
* Integrated cast-aluminum handles for easy handling and enhanced durability
* Locking power cord clip provides a secure connection between the amplifier and power cord
* Updated HiQnet Band Manager and System Architect control software
* Increased number of presets to a total of 30; 29 of which are user definable | L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation. |
CB Series ? CB 1902
Rugged Power Amplifier |
Presentation |
The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing.
The latest breakthrough in component assembly and manufacturing processes are present in this new Series.
All the models are equipped with high efficiency toroidal transformers and long life capacitors in a common, sturdy two U steel chassis.
The sum of these specs put them on the front row of cost/effectiveness for all fixed and mobile uses. |
Features |
* |
2U heavy duty steel chassis |
* |
Modular construction for easy servicing |
* |
Symmetrical layout for even weight distribution |
* |
High efficiency toroidal main transformer |
* |
Oversized, high energy, linear power supply |
* |
Dual, parallel or bridged operation |
* |
Twin balanced inputs (Neutrik XLR connectors) |
* |
Three dedicated Speakon outputs |
* |
High quality components used throughout |
* |
Efficient back to front cooling |
* |
Dual, continuously variable speed axial fans |
* |
Fault, signal, and clip indicators |
* |
Functional integrated front panel design |
* |
Heavy duty alloy carrying handles |
Protections |
* |
Calibrated mains fuse |
* |
Independent channel supply fuses |
* |
Input signal muting at turn on |
* |
Continuous short-circuit protection (CSP) |
* |
Thermal overload protection |
* |
Intelligent clip-limiter (ICL) |
* |
Progressive Ramp input signal |
* |
Currentless relay operation (CRO) |
Technical Specifications |
Output Power |
|
Continuous Average Power RMS, 1kHz, 1.0%THD+N |
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms |
2x 960W
2x 770W
2x 480W
1920W
1540W |
Pink Noise 12dB Crest Factor |
@ 2 ohms
@ 4 ohms |
2x 1650W
2x 1050W |
Frequency Response |
Power Bandwidth ±0.25dB |
20Hz - 20kHz |
Phase Response |
@ 1watt 20Hz - 20kHz |
±15deg |
Total Harmonic Distortion |
20Hz - 20kHz |
|
| IPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.
This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.
IPS 3700 is a 2 channel power amplifier that delivers up to 2 x 1500 W RMS @ 4 Ω (3000 W RMS bridged @ 8 Ω), weighing just 19.5 kg.
It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, powercon outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 3700 can withstand the hardest heat conditions ensuring great reliability.
APPLICATIONS
- • Small and medium sized PA systems
- • Club sound
- • DJs
- • Performance and sport venues
- • Worship systems
- • Public spaces
- • Cinema
General Specs
2 unit 19" rack, easy transportation
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety.
Front panel signal / clip / protect LED indicators
XLR input connectors
SPEAKON NL4 output connectors
Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz
Power consumption:800 W
Inputs/Outputs
Input connector: xlr
Input sensitivity: 1.4 V (/ 32 – 26 dB) dBm/V RMS
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
Output connector: Speakon
Amplifier Specifications
• Power output stereo 4Ω: 1500 W rms
• Power output stereo 8Ω: 1200 W rms
• Power output bridged 8Ω: 3000 W rms
• Frequency Response -3 dB: 20 Hz ÷ 20 kHz
• Signal/noise rate: 100 dB
• Crosstalk: -75 dB
• Damping factor: > 200
• Slew rate: 10V/μS
Size/Weight
Height: 88/3.4 mm/inch
Width: 482/18.9 mm/inch
Depth: 255/10 mm/inch
Net Weight: 16.6/36.5 kg/lbs
System Parameters
Protections: DC, internal fault, input overload, RF interference, unmatched load, output short-circuit,
Amplifier class: H
Cooling: Forced |
The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youʼre starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youʼll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.
- Model Name: SP4K
- Output Power 1 kHz, 500
- Crosstalk (20 Hz - 20 kHz): > 75 dB
- Voltage Gain (selectable): 26 / 32 / 38 dB
- Input Sensitivity: 4.0 / 2.0 / 1.0 V
- Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
- Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
- Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
- Connectors:
- Input: 2 x XLR
- Line Output: 2 x XLR
- Speaker Output: 2 x Speakon
- Power Supply: 230 V - 50 Hz
- Dimensions (W x H x D): 483 × 88.9 × 310 mm
| VLP Series Power Amplifier
- 1100W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 700W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- 2200W RMS @ 8 Ohms, 1K Hz, 1% THD (Bridge Mode, Mono)
- Total Harmonic Distortion: Less Than 0.5% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-05db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 20V Per usec
- Damping Factor @ 8 Ohm: 450
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 high speed cooling fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter
- Dimensions (LxWxH): 17.75" x 19" x 3.5" / 453 x 482 x 88mm (2 rm spaces)
- Weight: 50 lbs. / 23 Kgs. |
Reviews
There are no reviews yet.