PRICE PER UNIT The S5X-V The S5X-V is a four-way vertically oriented studio monitor incorporating ADAMʼs proprietary X-ART folded ribbon tweeter and midrange unit, which provide amazingly life-like, detailed imaging. It houses a 12” HexaCone subwoofer drive unit that has a large 3” voice coil and a heavy magnet system. The combination of this […]
The S5X-V is a four-way vertically oriented studio monitor incorporating ADAMʼs proprietary X-ART folded ribbon tweeter and midrange unit, which provide amazingly life-like, detailed imaging.
It houses a 12” HexaCone subwoofer drive unit that has a large 3” voice coil and a heavy magnet system. The combination of this big motor with the outstanding stiffness of the cone enable the reproduction of signals down to 25Hz while remaining stable and tight. The 7.5” midwoofer uses the same honey-comb core coated with Kevlar on both sides, allowing for an extremely precise and uncolored response.
The upper three drivers are each powered by a 250W discrete PWM amplifier, and a 500W digital amp powers the 12” subwoofer.
The S5X-V is designed to be used as either a midfield or main monitor in the most demanding professional recording, mixing, and surround studio applications.
Highly sophisticated control panel
Both versions of the S5X incorporate the new, very refined control panel that captivates the user with the variety and precision of its controls.
Apart from the standby-button, there are two controls for the input sensitivity, two for the bass section and two more for the high frequencies.
Subwoofer
Number
1
Basket Ø
12″ (305 mm)
Voice coil Ø
3″ (75 mm)
Cone material
HexaCone
Mid-Woofer
Number
1
Basket Ø
7.5″ (186 mm)
Voice coil Ø
2″ (50 mm)
Cone material
HexaCone
Midrange
Number
1
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5″ (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2″ (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
1
Type
PWM
Amp. power RMS / music
500 W / 700 W
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Frequency response
25 Hz – 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥118 dB
Max. peak
≥128 dB
Crossover frequencies
160 / 800 / 4000 Hz
Input impedance
10 KOhm
Weight
98.3 lb (44,6 kg)
Magnetically shielded
No
Height x Width x Depth
32.5″ (830 mm) x 16″ (410 mm) x 19″ (480 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Weight
45.00 kg
Reviews
There are no reviews yet.
Be the first to review “ADAM S5X-V Active Studio Monitor 500W” Cancel reply
Perfect for Home Studios and Multimedia Applications
2-Way Studio Monitors with 2 x 8 Watts Power Output
Dedicated Volume, Mic Level, Bass and Treble Controls
Powerful 4'' Woofers and High-Resolution 1.5'' Tweeters
1/8'' TRS Stereo and RCA Stereo Input Connectors
Content
PRICE PER UNIT
The S5X-V
The S5X-V is a four-way vertically oriented studio monitor incorporating ADAMʼs proprietary X-ART folded ribbon tweeter and midrange unit, which provide amazingly life-like, detailed imaging.
It houses a 12” HexaCone subwoofer drive unit that has a large 3” voice coil and a heavy magnet system. The combination of this big motor with the outstanding stiffness of the cone enable the reproduction of signals down to 25Hz while remaining stable and tight. The 7.5” midwoofer uses the same honey-comb core coated with Kevlar on both sides, allowing for an extremely precise and uncolored response.
The upper three drivers are each powered by a 250W discrete PWM amplifier, and a 500W digital amp powers the 12” subwoofer.
The S5X-V is designed to be used as either a midfield or main monitor in the most demanding professional recording, mixing, and surround studio applications.
Highly sophisticated control panel
Both versions of the S5X incorporate the new, very refined control panel that captivates the user with the variety and precision of its controls.
Apart from the standby-button, there are two controls for the input sensitivity, two for the bass section and two more for the high frequencies.
Subwoofer
Number
1
Basket Ø
12" (305 mm)
Voice coil Ø
3" (75 mm)
Cone material
HexaCone
Mid-Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Midrange
Number
1
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5" (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
1
Type
PWM
Amp. power RMS / music
500 W / 700 W
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Frequency response
25 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥118 dB
Max. peak
≥128 dB
Crossover frequencies
160 / 800 / 4000 Hz
Input impedance
10 KOhm
Weight
98.3 lb (44,6 kg)
Magnetically shielded
No
Height x Width x Depth
32.5" (830 mm) x 16" (410 mm) x 19" (480 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
113dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
Integral through cancellation magnets or by magnet design
Box :
7-1/2" (19mm) MDF panels
Finish :
Dark red natural veneering side panels, black body
Dimensions (HxWxD) :
13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight :
24.2lb (11kg)
Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
Dedicated Volume, Bass and Treble controls for more flexibility
Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
1/8'' TRS headphone connector with auto-mute loudspeaker function
Magnetically shielded for placement near computer monitors
Designed and engineered in Germany
Specifications
Woofer: 4''
Tweeter: 1.5''
Output Power: 2 x 8 Watts
Frequency Response: 80Hz - 20kHz
Speaker Impedance: 4?
Input 1:
Connector: 1/8'' TRS Stereo
Input Level: -10dBm, 10k?
Input 2:
Connector: RCA Stereo
Input Level: -10dBm, 10k?
Mic Input:
Connector: 1/4'' TRS
Input Level: -50dBm, 50?
Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.