ALIANTE NOVA 2-WAY LOUDSPEAKER 100W

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak

Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)

Frequency Response: 48 Hz - 35 KHz
Sensitivity (1W@1m): 90 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 100 W
System Power Handling (RMS): 150 W
Recommended Amplifier Requirements: 20 - 150 W
Maximum SPL (dBA): 108
Bass Alignment: Front and rear ported
Drive Unit Complement: 2 x 100mm (4“) MMP®II cone bass/mid driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 1000 x 125 x 140 mm
(39 3/8 x 4 15/16 x 5 1/2)
(Without spikes)
Weight (each):
Kg (lbs) 10.2 (22 1/2)

User's Manual

Expanding on the radical design found in the award winning Aero speakers, Aeromax 6 has been tuned to the max to become even better sounding than its predecessor. Available in beautiful, modern, gloss black and white lacquer finishes and with a more coherent and immersive sound, Aeromax 6 is innovative, stylish and ideal for those who want the best stereo performance.

By replacing the traditional tweeter with a BMR (Balanced Mode Radiator) driver, the Aeromax 6 offers a radical improvement in audio quality compared to its rivals. Using the BMR shifts the crossover point between tweeter and woofer away from the usual 3kHz, right at the middle of the human ear\'s most sensitive hearing range, to a less problematic 250Hz. The result is a more natural, immersive and coherent sound. The 4th generation BMR® driver construction also delivers a more room-filling sound by using horizontal vibration modes for a much wider sound. This makes them ideal for modern homes and room layouts where speakers might not end up placed optimally for traditional stereo. You can place the Aeromax 6 where you want and still get great stereo and surround effects.

As well as offering a more coherent sound at the top end, the unique BMR® technology offers advantages at the bottom end too. Aeromax cone drivers and subwoofers are specifically designed to complement the BMR™ drivers - producing cinematic, immersive sound with sumptuous and accurate bass. And with two mid base drivers incorporated into the Aeromax 6 the bass is ground shaking.

Aeromax 2 and Aeromax 6 both feature a brand new, 4th generation BMR® driver with exceptional high frequency extension to deliver a crisp and detailed top end

Aeromax uses ultra high grade crossover components to bring superb levels of detail and transparency

Extensively braced cabinets lock the drive units mechanically to the cabinet structure resulting in lower colouration and cleaner dynamics. This is especially important with Aeromax as the drivers are actually high power subwoofers, so the more rigid the cabinet, the better

Aeromax 2 and 6 feature brand new, audiophile grade, gold plated speaker terminal posts for the ultimate performance

Oxygen Free Copper (OFC) internal cabling for the purest signal path from the audiophile grade, gold plated terminal posts to the crossover and drive units

30Hz - 22kHz

25-120 Watts

1 x BMR 46mm (2“), 2 x 165mm (6.5“) high power subwoofer

Black Gloss or White Gloss

240 x 980 x 344mm (9.4 x 38.6 x 13.5“)

17kg (37.4lbs)

Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey