Content |
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Driver Complements Subwoofer 2 - 6" Diameter (15.24cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Ehanced Ring Radiator tweeter Electrical Overall Frequency Response 20Hz-40kHz 22Hz-40kHz Lower -3dB Limit 38Hz dB 42Hz dB Upper -3dB Limit 30kHz dB 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-300 w/channel 20-250 w/channel Efficiency 88 dB 88 dB Crossover Orth Crossover Orth Crossover Crossover (mid-high array) 3000Hz 2800Hz Crossover (subwoofer) 100HZ 100Hz Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts Dimensions Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D (129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D (119.38cm H x 21.11cm W x 36.51cm D) Footprint Size 10 1/2" W x 20 5/16" D (26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D (23.50cm W x 41.27cm D) Mounting Options floor floor Enclosure Type Sealed Sealed Enclosure Type (subwoofer) Dual PowerPort Dual PowerPort bass venting Shipping/Other Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs) Shipping unit: each each Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs) Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
System Format: 3 Way Frequency Response: 35 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 114.5 dBA Power Handling (RMS): 150 W Recommended Amplifier Requirements (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 400 Hz M.F - H.F: 2.6 kHz Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 951 x 170 x 300 mm (37 7/16 x 6 11/16 x 11 13/16 inch) Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Frequency Response: 48 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS): 100 W System Power Handling (RMS): 150 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Front and rear ported Drive Unit Complement: 2 x 100mm (4“) MMP®II cone bass/mid driver. 1 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 1000 x 125 x 140 mm (39 3/8 x 4 15/16 x 5 1/2) (Without spikes) Weight (each): Kg (lbs) 10.2 (22 1/2) User's Manual
|
Expanding on the radical design found in the award winning Aero speakers, Aeromax 6 has been tuned to the max to become even better sounding than its predecessor. Available in beautiful, modern, gloss black and white lacquer finishes and with a more coherent and immersive sound, Aeromax 6 is innovative, stylish and ideal for those who want the best stereo performance.
By replacing the traditional tweeter with a BMR (Balanced Mode Radiator) driver, the Aeromax 6 offers a radical improvement in audio quality compared to its rivals. Using the BMR shifts the crossover point between tweeter and woofer away from the usual 3kHz, right at the middle of the human ear\'s most sensitive hearing range, to a less problematic 250Hz. The result is a more natural, immersive and coherent sound. The 4th generation BMR® driver construction also delivers a more room-filling sound by using horizontal vibration modes for a much wider sound. This makes them ideal for modern homes and room layouts where speakers might not end up placed optimally for traditional stereo. You can place the Aeromax 6 where you want and still get great stereo and surround effects.
As well as offering a more coherent sound at the top end, the unique BMR® technology offers advantages at the bottom end too. Aeromax cone drivers and subwoofers are specifically designed to complement the BMR™ drivers - producing cinematic, immersive sound with sumptuous and accurate bass. And with two mid base drivers incorporated into the Aeromax 6 the bass is ground shaking.
New BMR® driver
Aeromax 2 and Aeromax 6 both feature a brand new, 4th generation BMR® driver with exceptional high frequency extension to deliver a crisp and detailed top end
Improved crossover
Aeromax uses ultra high grade crossover components to bring superb levels of detail and transparency
Superior cabinet bracing
Extensively braced cabinets lock the drive units mechanically to the cabinet structure resulting in lower colouration and cleaner dynamics. This is especially important with Aeromax as the drivers are actually high power subwoofers, so the more rigid the cabinet, the better
New speaker terminals
Aeromax 2 and 6 feature brand new, audiophile grade, gold plated speaker terminal posts for the ultimate performance
High grade internal cabling
Oxygen Free Copper (OFC) internal cabling for the purest signal path from the audiophile grade, gold plated terminal posts to the crossover and drive units
Frequency response
30Hz - 22kHz
Recommended amplifier power
25-120 Watts
Drivers
1 x BMR 46mm (2“), 2 x 165mm (6.5“) high power subwoofer
Colour
Black Gloss or White Gloss
Dimensions (WxHxD)
240 x 980 x 344mm (9.4 x 38.6 x 13.5“)
Weight
17kg (37.4lbs)
|
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
Reviews
There are no reviews yet.