| Content | 4 Channel Analogue
DJ Mixer
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.
The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.
With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.
Features
• 4 channels with phono/line inputs
• VCF Filter system – low-pass, high-pass and band-pass filters plus frequency and resonance controls
• 3-band EQ
• External FX loop (Send/Return) system with dry/wet control per channel
• Mic input on balanced XLR, with 2-band EQ
• Balanced main mix out on XLR
• Independent booth out
• Record out
• 3.5mm and 1/4″ headphone outputs
• Touring grade build quality
• Super smooth VCA channel faders
• User changeable crossfader
• Innofader compatible
• Crossfader curve switch
• 20dB pro standard headroom
• 9-segment signal level monitoring |
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
| Product Description
The new DJM-750 mk2 from Pioneer DJ is a 4-channel mixer designed to take over from the DJM-750 and the DJM-850 and bring versatility into the DJ booth or at home. The DJM-750mk2 comes with a built-in INTERFACE2 for Rekordbox DJ and licence codes for Rekordbox DJ and Rekordbox DVS! So whether you want to use CDJs or turntables, with a laptop or no laptop, the DJM-750mk2 has you covered. Not only that, but it takes many features from the top-of-the-range DJM-900NXS2, including lo-mid-high frequency FX and Magvel crossfader.
Take the step to the DJ booth seamlessly with the DJM-750MK2, a 4-channel mixer which inherits key features and design elements from the DJM-900NXS2, creating a club-style setup when combined with our professional CDJ or XDJ multi players.
You can perform seamless mixes on the DJM-750MK2 thanks to the smooth curves on the EQs and channel faders. The Magvel crossfader, inherited from the DJM-900NXS2, gives a precise response and assured feel during even the most complicated scratch techniques.
PRO FX WITH DETAILED CONTROL: Add texture and flair to your mixes with professional FX inherited from the DJM-900NXS2. 2 effects units combine Sound Color FX and Beat FX – including FX Frequency – giving you the freedom to be creative with sound while always in control.
INDEPENDENT SEND/RETURN: Choose from Aux or Insert send/return to connect different types of FX units on iOS devices such as FX apps, synthesizers and samplers, and combine them with the mixerʼs internal FX. A simple connection via USB will ensure high-quality sound.
PROFESSIONAL SOUND QUALITY: Whether youʼre playing with digital or analogue sources, high-quality sound is created by the 64-bit digital signal processor, dithering technology, 32-bit A/D converter and 32-bit D/A converter.
SMOOTH EQS & FADERS: The EQs and channel faders on the DJM-750MK2 feature curves equivalent to those on the DJM-900NXS2, which also inspired the Magvel cross fader. The latter is smooth, accurate and durable for more than 10 million movements and its cut lag has been improved for more assured and responsive performance
REKORDBOX DJ BUNDLED: You get a rekordbox dj licence key bundled with this controller. Simply activate your licence key for our DJ software, connect the controller and start DJing.
REKORDBOX DVS BUNDLED: You also get a licence key for rekordbox dvs included in the box for low-latency scratching with CDJs and XDJs. Or play and scratch with tracks from your rekordbox library using analogue turntables and the Control Vinyl (sold separately).
| Number of Channels |
4 x Stereo
1 x Mic |
| EQ |
Channel EQ:
Hi: -26 to +6 dB at 20 kHz
Mid: -26 to +6 dB at 1 kHz
Low: -26 to +6 dB at 20 Hz
Mic EQ:
Hi: -12 to +12 dB at 10 kHz
Low: -12 to +12 dB at 100 Hz |
| Built-In Effects |
Yes |
| Sample Rates |
48 kHz |
| Bit Depths |
32-Bit (Master Output)
32-Bit (A/D Conversion)
24-Bit (D/A Conversion) |
Connectivity
| Audio Inputs |
4 x Stereo RCA Phono Input
4 x Stereo RCA Line Input
1 x Combo XLR-1/4" TRS Mic Input
2 x 1/4" TS Return Input |
| Audio Outputs |
2 x XLR 3-Pin Master Output
1 x Stereo RCA Master Output
2 x 1/4" TRS Booth Output
1 x 1/4" TRS Headphone Output
1 x 1/8" / 3.5 mm TRS Headphone Output
2 x 1/4" TS Send Output |
| USB |
1 x USB Type-A (Device Charging/Device Connection)
1 x USB Type-B (Host Connection) |
Performance
| Frequency Response |
Line:
20 Hz to 20 kHz |
| Input Level |
Phono:
-52 dBu
Line:
-12 dBu
Mic:
-57 dBu
Return:
-12 dBu |
| Output Level |
XLR Master:
+6 dBu
+25 dBu (Max)
RCA Master:
+2 dBu
+21 dBu (Max)
Booth:
+6 dBu
Aux/Send:
-6 dB
Send/Insert:
-12 dB
Headphone:
+8 dBu |
| I/O Impedance |
Phono Input:
47 Kilohms
Line Input:
47 Kilohms
Mic Input:
3 Kilohms
Return Input:
47 Kilohms
XLR Master Output:
300 Ohms
RCA Master Output:
680 Ohms
Booth Output:
300 Ohms
Send Output:
680 Ohms
Headphone Output:
≤10 Ohms |
| Load Impedance |
Master Output:
10 Kilohms
Booth Output:
10 Kilohms
Send Output:
10 Kilohms
Headphone Output:
32 Ohms |
| Crosstalk |
Line:
82 dB |
| SNR |
Phono:
87 dB
Line:
105 dB
Mic:
79 dB |
| THD |
Line/Master:
0.005% |
Compatibility
| OS Compatibility |
macOS
Windows |
Power
| Power Requirements |
AC Input, USB Bus Power |
| AC Input Power |
110 to 240 VAC, 50/60 Hz |
| Power Consumption |
40 W
0.3 W (Standby) |
Physical
14.6 lb / 6.6 kg
| Operating Humidity |
5 to 85% |
| Operating Temperature |
41 to 95°F / 5 to 35°C |
| Dimensions (W x D x H) |
12.6 x 15.3 x 4.2" / 320.0 x 388.6 x 106.7 mm |
| Weight |
|
| Although the origins of the company date from 1965, ECLER presented its first mixer back in the 70s: the A4, a simple 4 channel mixer oriented to Super 8 film sound edition. The company grew in the 70s with the boom of disco and tourism.
The AC-4 was a high fidelity mixer designed to meet the most demanding sound requirements in discos, theatres, cinemas, recording studios, conference rooms... The electronic circuits and the extreme selection of all components and transistors used, made the AC-4 a professional high quality mixer.
The new AC-6 is a tribute to those old school, simple, robust, reliable and great sounding mixers. The AC6 enables a new generation of DJs to enjoy the unique sound of those legendary mixers. | Xone:96. The long-awaited follow-up to a genuine club classic.
A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.
It’s all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.
Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.
Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.
Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.
Xone96: You mixed. We listened.
- Type Analogue
- Channels 6 + 2
- EQ
Channel 1-4, 4-Band EQ
Channel A-B, 3-Band Parametric EQ
- USB Soundcards Dual 24 Channel (12 in / 12 out)
Hi-Speed USB2.0 / Mac Class Compliant
32bit / 96kHz
MIDI over USB
- Line Inputs 4 x RCA (CH 1-4)
4 x 1/4″ TRS (CH A-D) Mono/Stereo
- Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS
- USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
- Mic Input 2 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x 1/4″ TRS (Balanced)
- Booth Output 1 x 1/4″ TRS (Balanced)
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Out 1 x 5-Pin DIN
- Send/Return I/O
2 x 1/4″ TRS Send
4 x 1/4″ TRS Return
1 x LN/Hi-Z Switch (SND1/RTNA)
- Filter
2 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A-B
CRUNCH (Controlled Harmonic Signal Distortion)
- X-Link 1 x RJ45
- Headphones
2 x 1/4″
2 x 3.5mm
Split Cue Monitoring
- Channel Faders 60mm VCA / Replaceable
- Chanel Meters 9 Segment LED
- Channel Fader Curve 3 Types
- X-Fader InnoFADER / 45mm VCA / Replaceable
- X-Fader Curve 3 Types
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 45W max
- Mains Adaptor 3 pin IEC socket
- Height 109mm / 4.3″
- Width 336mm / 13.25″
- Depth 410mm / 16.2″
- Weight 7kg / 15.4 lbs.
| DIGITAL PRO MIXER DDM4000 Ultimate 5-Channel Digital DJ Mixer with Sampler, 4 FX Sections, Dual BPM Counter and MIDI
- 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 patented* BPM counters, digital crossfader and MIDI
- 4 Phono/Line stereo channels allowing max. 8 signal sources to be connected simultaneously
- 2 Microphone inputs with Gain, EQ, Talk function and FX
- 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment
- Sophisticated sampler with beat-controlled loop function, real-time pitch control, sampler FX and crossfader start option
- 2 freely assignable and BPM-synchronized, high-quality FX engines (Bitcrusher, Resonator, Reverb, Flanger, etc.)
- Ultra-fast, accurate and patented* BPM counters for automatic BPM synchronization of sampler, FX, crossfader and external drum machines, etc. via MIDI
- Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading
- Dual-mode crossfader with innovative frequency-selective crossfading
- Dedicated Headphone section includes PFL Mix/Split and Bass/Snare boost functions
- Recall your last mixer setting at the push of a button
- Digital S/PDIF output for direct recording of your performance
- Rack mount brackets included for ultimate flexibility
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
- * U.S. Patent No.: 6812394 / German Patent No.: 102 23 735
|
Reviews
There are no reviews yet.