ALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT

Original price was: €124.00.Current price is: €119.04. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: SM-50 Category:
The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars, electric bass, and electronic music instruments with mixing desks of PA systems and of recording studios. The SM-50 reduces the amount of microphones used on stage, thus improving gain before feedback. Coloration of sound is avoided. Clean signal without interference from other instruments eases […]

 

Read more

The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.

Technical Data

input impedance 20 kOhm
input impedance, instrument
input impedance, line-In
input impedance, speaker
output impedance 200 Ohm
frequency response 30 … 20000 Hz, ± 1 dB
THD
isolation voltage tranformer pri/sec 2500 V
                        outpur to ground 1500 V
inputs 1/4″ phone jacks, unbalanced
outputs XLR, balanced, microphone level.
           pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
 

Weight 0.23 kg

Reviews

There are no reviews yet.

Be the first to review “ALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT”

Your email address will not be published. Required fields are marked *

Quick Comparison

ALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-065 ACTIVE D.I BOX removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY remove
NameALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-065 ACTIVE D.I BOX removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY remove
Image
SKUSM-50E005866PAN03ADB4ELH065LDI02
Rating
Price Original price was: €124.00.Current price is: €119.04. incl. GR VAT Original price was: €45.75.Current price is: €39.00. incl. GR VAT Original price was: €478.10.Current price is: €292.43. incl. GR VAT Original price was: €672.58.Current price is: €585.13. incl. GR VAT Original price was: €89.28.Current price is: €77.67. incl. GR VAT Original price was: €66.48.Current price is: €58.64. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 5 left in stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 5 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.

Technical Data

input impedance 20 kOhm
input impedance, instrument input impedance, line-In input impedance, speaker output impedance 200 Ohm
frequency response 30 ... 20000 Hz, ± 1 dB
THD isolation voltage tranformer pri/sec 2500 V
                        outpur to ground 1500 V
inputs 1/4" phone jacks, unbalanced
outputs XLR, balanced, microphone level.
           pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
 

Behringer DI-600P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage. It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal. Hook Your Guitar or Amp Up to the PA Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig! Behringer Ultra-DI DI600P Direct Box Features:
  • Compact, high-performance passive direct box
  • Jack input 1/4" TS in and parallel out
  • Gold-plated XLR output / impedance balanced
  • Super-flat frequency output for uncolored sound
  • Switchable filter that optimizes the DI for guitars
  • Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
  • Instruments or amplifier outputs with up to 3,000 watts can be connected directly
  • Offers impedance and signal matching of instruments to mixers
  • Perfect for stage and studio use
  • Ground lift switch eliminates typical ground loop problems
  • Rugged metal case can take the rigors of the road
Get your signal to the board with Behringer\'s Ultra-DI DI600P direct box! Tech Specs
  • Type: Passive DI Box
  • Channels: 1
  • Ground Lift: Yes
  • Inputs: 1 x 1/4"
  • Outputs: 1 x 1/4“, 1 x XLR
  • Height: 1.4"
  • Width: 3.75"
  • Depth: 5"
  • Weight: 0.66 lbs.
  • Manufacturer Part Number: DI600P

Palmer PAN 03
19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Product type DI Boxes
Type active
Channels 4
Inputs 4
Input connectors 6.3 mm jack
Max. input level + 45 dBu
Input impedance (@ 60 Hz) 1 M Ohm(s)
Input pad 0 / -30 dB
Outputs 4 (+ 4 parallel XLR outs)
THRU outputs/channel 1
Output connectors 6.3 mm jack , XLR
Max. output level + 10 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 20000 Hz
Transformer balanced Yes
Ratio 10 : 1
Indicators Power
Controls attenuator , ground lift
Operating voltage external
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 "
Depth 90 mm
Height 45 mm
Height 1 U
Weight 1,6 kg

You're serious about getting rid of all that excess noise on stage, but you've got so many line
instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
lot of DI power.

? Requires phantom power or 9v battery
? Ground lift switch
? Instrument or speaker level switch
? Transformerless
? Can be used with amp up to 400w
? RF shielding

pdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg
Weight0.23 kg0.30 kg1.90 kg0.50 kg0.80 kg0.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.23 kg
Weight 0.30 kg
Weight 1.90 kg
Weight 0.50 kg
Weight 0.80 kg
Weight 0.70 kg

Recently Viewed Products