2 – Channel Expander – Gate / Compressor / Limiter The ALTO line of dynamic processors is among the most complete available on the market today. From the simple ACL2, yet including Compressor, Limiter, Expander and Gate to the 8 channels, 2-U model ACL8 including 8 complete dynamic processing strips, these processors are compact, easy […]
The ALTO line of dynamic processors is among the most complete available on the market today. From the simple ACL2, yet including Compressor, Limiter, Expander and Gate to the 8 channels, 2-U model ACL8 including 8 complete dynamic processing strips, these processors are compact, easy to use with very low distortion VCA made by THAT for noise less operation. The simple, intuitive layout, colour scheme and the presence of many illuminated switches make these processors easy to use also by beginners.
Weight
3.10 kg
Reviews
There are no reviews yet.
Be the first to review “ALTO ACL2PRO COMPRESSOR-LIMITER-EXPANDER 2-CHANNEL” Cancel reply
The ALTO line of dynamic processors is among the most complete available on the market today. From the simple ACL2, yet including Compressor, Limiter, Expander and Gate to the 8 channels, 2-U model ACL8 including 8 complete dynamic processing strips, these processors are compact, easy to use with very low distortion VCA made by THAT for noise less operation. The simple, intuitive layout, colour scheme and the presence of many illuminated switches make these processors easy to use also by beginners.
Weight: 3.1kg (6.8 lb)
The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4's Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative.
FEATURES:
4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
Four independent channels of operation, stereo linkable in two pairs
PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
Independent Threshold and ratio controls
Switchable OverEasy® or Hard Knee compression
Classic dbx® compression
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
True RMS level detection
Precision metering of input level, output level, and gain reduction
Dual True stereo or quad mono operation
Switchable +4dBu or -10dBV operation per channel
Input Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input
> +22 dBu balanced or unbalanced
CMRR
Typically >50 dB at 1 kHz
Output Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type
Servo-balanced/unbalanced, RF filtered
Output Impedance
Balanced 30 Ohm, unbalanced 15 Ohm
Max Output
> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response
0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range
> 118 dB, unweighted
THD+Noise
>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling
True RMS Power Summing
Compressor Threshold Range
-40 dBu to +20 dBu
Compressor Ratio
1:1 to infinity:1
Compressor Threshold Characteristic
Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic
AutoDynamic™
Compressor Attack Time
Program-dependent
Compressor Release Time
Program-dependent
Compressor Output Gain
-20 to +20 dB
Limiter Threshold Range
0 dBu to +24 dBu (off)
Limiter Ratio
infinity:1
Limiter Type
PeakStopPlus® two-stage limiter
Limiter Stage 1
PeakStop® brickwall limiter
Limiter Stage 1 Attack Time
Zero
Limiter Stage 1 Release Time
Zero
Limiter Stage 2
Predictive intelligent program limiter
Limiter Stage 2 Attack Time
Program-dependent
Limiter Stage 2 Release Time
Program-dependent
OverEasy® Switch
Activates the OverEasy compression function
I/O Meter Switch
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch
Activates the direct input-to-output hard-wire bypass
Operating Level Switch
(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch
Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator
1 LED to indicate PeakStop™ limiting
Function Switches
LED indicator for each front-panel switch
Output Transformer Options
Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage
Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption
20 Watts
Fuse
100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector
IEC receptacle
Dimensions
1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight
5.2 lbs. (2.4 kg)
Shipping Weight
7.6 lbs. (3.5 kg)
SHARK FBQ100
Automatic Feedback Destroyer with Integrated Microphone Preamp, Delay Line, Noise Gate and Compressor
High performance single channel Feedback Destroyer with integrated microphone preamp, delay line, noise gate and compressor
Automatically and "intelligently" locates and destroys up to 8 feedback frequencies
Narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
Ultra-low noise Mic/Line input with Gain control and +48 V phantom power
Delay line with up to 2.5 seconds of delay, adjustable in meters, feet and msec
Noise gate with automatic and manual parameter settings
Automatic compressor with variable density
Subsonic filter with adjustable cut-off frequency
Balanced inputs and servo-balanced outputs with ¼'' TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.