Content | The Apart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings.
The loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of microphone calls and backgroundmusic at a higher volume level.
The housing is made of high quality ABS. The woofer is made out of enforced polypropylen with a rubber edge, what makes it moisture-proof.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
The CMX20T is in white color RAL 9010 and is also standard available in black (CMX20T-BL) and silver (CMX20T-SLV). From 12 pieces on, the loudspeakers can be painted optionally in any other RAL colour. (Ref.: PAINT-CM).
Type: Ceiling
Material: Plastic
Power: 60W RMS / 100W program @16ohms. 2.5,5,10,20W@100V
Ohms Connectivity: 16Ω
Sensitivity: 93dB@1W/1m
Max SPL: 110dB
LF, Woofer: 1x8\'\'
HF, twetter: 1x1\'\'
Frequency Response :50Hz-20KHz
Suspension: From false ceiling with 3 screws (internal)
Connectors: Τerminal
Dimensions Diameter /Height: ø 244 / 90
Dimensions Hole: 220mm
Minimum Depth: 90mm
Weigth :1.4 Kg
Color: White | |
JBL Control Contractor Series 26CT Ceiling Speaker The Control 26C is a powerhouse ceiling speaker containing a coaxially mounted
6.5" woofer and 3/4" titanium-coated tweeter, able to deliver maximum sound level
over a wide coverage area. The Control 26CT includes a multitap transformer for a
70V or 100V line distribution system.
Key Features:
�75 Hz to 20 kHz frequency range (-10 dB)
�140 watts continuous program power capacity
�89 dB sensitivity (1W/1m)
�16 ohms nominal impedance
�110° conical coverage (polar)
�Steel back-can with removable locking connector
�Control 26CT 70V taps: 60W, 30W, 15W, 7.5W
�Control 26CT 100V taps: 60W, 30W, 15W.
�Dimensions (height x diameter): 210 mm x 252 mm (8.3 in x 9.9 in)
�Net Weights: Control 26C = 3.4 kg (7.5 lb), Control 26CT = 4.2 kg (10 lb)
�See Specifications PDF for more details
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Integrated with a speaker unit and panel, the PC-2852 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring. |
Reviews
There are no reviews yet.