| Content |
The Intelli-Q is the first of a new breed of fast, easy-to-use, digital problem solvers from Apex. Intelli-Q's super-quick processors and intuitive operation allow the precision, control and reset-ability expected from the best digital devices but with the response and sound until now only possible with analogue.
Intelli-Q Hardware
Each remotely-controlled 1U, rack-mount Optimizer provides two completely discrete, identical, link-able audio channels each with a unique and exciting combination of sophisticated audio tools sure to get the best from any Front of House, Stage Monitor or In-Ear system:
• A Real-Time 30-band 'Constant Q' Graphic Equalizer - the only such digital equalizer that works as quickly and cleanly as you do. EQ curves can be drawn freehand, and the results heard instantly without audio side effects. Sophisticated compensation calculations eliminate interference between neighbouring frequency bands so that what you see is really what you get, a perfect partner to the new generation of acoustic measuring tools.
• 10 bands of Apex Parametric EQ - fully over-lapping with a variable wide-Q on boost and variable tight "notch" response on cut.
• Fully variable High and Low Pass Fliters - choose between Butterworth, Bessel and Linkwitz-Riley curves and 6/12/18/24 dB per Octave roll-off.
• Two-Band fully-variable frequency Shelving EQ.
• Dual - band Compressor – variable crossover frequency, ratio, attack and release, and a unique variable threshold for each stage of the soft knee response.
• Output Delay - variable up to 5 seconds.
• System Output Limiter - a post-fader, hard-limiter, with variable threshold and release, to protect both ears and speaker systems.
• Up to 16 Intelli-Q dual-channel Optimizers can be linked together and controlled using a hard-wired or radio-remote PC.
• As there is no dedicated ʽMasterʼ or ʽSlaveʼ, all units are identical for easy configuration and hire-stock management.
• In addition to balanced main-signal inputs and outputs, side chain inputs are fitted for use as extra inputs or to control the dual-band compressor.
• A 48V phantom-powered mic input is available for the on-screen 30-band Spectrum Analyzer which has a
dedicated pink noise generator. |
Wireless 5.8 GHz Stereo Receiver
- For wireless transmission of a stereo audio signal together with the
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
- Volume control
- Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
| WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
Overview
Dial in YOUR mix exactly as YOU want it, in Real Time.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
Recommended for: Portable, Tour.
Features
- 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
- 16 Preset Locations for Mix & Configuration Recall
- LCD Display with 16 Channel Metering
- Built-In Lexicon© Reverb
- dbx PeakStopPlus™ Limiting
- Global High & Low EQ
- Global Master Level Control
- Global Stereo Width Control
- BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
- XLR & 1/4” Stereo or Mono Outputs
- 1/8” & 1/4” Headphone Outputs
- Setup Wizard for Easy Configuration
- Supports 48 kHz & 96 kHz Sampling Rates
- Channel Linking, Grouping, & Multi-Select Capabilities
- Supports up to 60 PMC16s on a Single BLU Link Ring
- Built-In Sturdy Mic Stand Mount
- USB Port for Firmware Updates
|
Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation. |
Product Features:
16-channel digital stereo mixer to create your personal monitor mix
Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes
State-of-the-art 24-bit D/A converters for premium audio quality
16 Channel Select buttons with dual LEDs for perfect overview
Level and Pan/Spread control per channel with LED meter
3-band EQ per channel with mid-band frequency control
Solo and Mute functions per channel
Global Level and EQ controls plus Panic Mute function
High power and \"drummer proof\" headphones output
Fully adjustable limiter protects your ears and headphones
Additional mono/stereo line output to connect your powered monitor
MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc.
Standard CAT5e connection delivers power and 16 signals to each Personal Mixers
ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D)
Ultra-low system latency of less than 1 millisecond
Powered via external power supply (included) or P16-I / P16-D
Mounts easily on a mic stand with the P16-MB mic stand mount (not included)
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
User\'s Manual |
Reviews
There are no reviews yet.