AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE

175.00 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa Impedance: 120 ohms Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB […]

 

Read more

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
  • Impedance: 120 ohms
  • Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 136 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 3.8 mA typical
  • Weight: 403 g (14.2 oz)
  • Dimensions: 170.0 mm (6.69“) long, 52.0 mm (2.05“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8458 shock mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE removeAvantone AV-CK6 Condenser FET mic, inc shock mount, wooden mic box and metal case removeNEUMANN TLM-193 Cardioid Condenser Microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeNEUMANN M-150 TUBE Condenser Tube Microphone remove
NameAUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE removeAvantone AV-CK6 Condenser FET mic, inc shock mount, wooden mic box and metal case removeNEUMANN TLM-193 Cardioid Condenser Microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeNEUMANN M-150 TUBE Condenser Tube Microphone remove
Image
SKUAT2035AV-CK6H11NE00001H11RD00025H11NE00046H11NE00026
Rating
Price 175.00 incl. GR VAT212.03 incl. GR VAT 1,399.00 incl. GR VAT 188.00 incl. GR VAT 2,849.00 incl. GR VAT 6,659.00 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 5 left in stock

AvailabilityOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 5 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
  • Impedance: 120 ohms
  • Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 136 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 3.8 mA typical
  • Weight: 403 g (14.2 oz)
  • Dimensions: 170.0 mm (6.69“) long, 52.0 mm (2.05“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8458 shock mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch

The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!

The rugged CK-6 microphone body and capsule assembly are precision machined of Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.

This Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule is designed with circuitry that will yield pleasing professional results comparable to much more expensive designs. It also features -10 dB pad  &  80 Hz LF roll off switches for varied recording situations.
 
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
 
Applications

Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…

Specifications

Type: True Transformerless Condenser
Polar Pattern: Cardioid
Frequency Response: 35-20,000 Hz +/- 3.5dB
Output Impedance:

Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms18 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-321 dB
Equivalent SPL DIN/IEC 65110 dB-A
S/N ratio CCIR 468-373 dB
S/N ratio DIN/IEC 65184 dB
Maximum SPL for THD 0.5%140 dB
Maximum output voltage13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651130 dB
Supply voltage48 V ± 4 V
Current consumption3 mA
Matching connectorsXLR 3F
Weight480 g
Diameter49 mm
Length175 mm
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
Three directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation

Ideal as main and as support microphone in the most differing recording situations

 

Acoustical operating principle Pressure gradient transducer
Directional pattern Omnidirectional, cardioid, figure-8 plus
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 20/28/22 mV/Pa1)
Rated impedance 200 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR2) 26/23/25 dB1)
Equivalent noise level, A-weighted2) 15/12/14 dB-A1)
Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) 68/71/69 dB1)
Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) 79/82/80 dB1)
Maximum SPL for THD 0.5%3) 117 dB (cardioid)
Maximum SPL for THD 0.5% with preattenuation3) 127 dB
Maximum output voltage 390 mV
Dynamic range of the microphone amplifier (A-weighted) 105 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 0.8 mA
Matching connectors XLR3F
Weight 500 g
Diameter 56 mm
Length 200 mm

 

Acoustical operating principlePressure transducer
Directional patternOmnidirectional
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-328 dB
Equivalent SPL DIN/IEC 65115 dB-A
S/N ratio CCIR 468-366 dB
S/N ratio DIN/IEC 65179 dB
Max. SPL (tube characteristic)K
Dynamic range (of the amplifier)K
Maximum output voltage8 dBu
Weight800 g
Diameter78 mm
Length165 mm
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
Weight0.50 kg0.60 kg0.48 kg3.00 kg2.00 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.60 kg
Weight 0.48 kg
Weight 3.00 kg
Weight 2.00 kg
Weight 0.80 kg