Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa Impedance: 120 ohms Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB […]
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Weight: 403 g (14.2 oz)
Dimensions: 170.0 mm (6.69“) long, 52.0 mm (2.05“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
20 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent SPL CCIR 468-3
24 dB
Equivalent SPL DIN/IEC 651
12 dB-A
S/N ratio CCIR 468-3
70 dB
S/N ratio DIN/IEC 651
82 dB
Maximum SPL
114 dB for THD
Maximum output voltage
8 dBu
Dyn. range of the mic. amplifier DIN/IEC 651
102 dB for THD
Supply voltage
Power supply N 149 A
Matching connector
Microphone: DIN 8F, Power Supply: XLR 3F
Weight
460 g
Diameter
57 mm
Length
142 mm
Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
Manual Download
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.
Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.
An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern
cardioid
Frequency range
20 to 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL
140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3)
25 dB
Equivalent noise level
14 dB-A
Signal/noise ratio (A-weighted)
80 dB
Preattenuation pad
10 dB, switchable
Bass filter
6 dB/octave below 500 Hz
Impedance
200 ohms
Recommended load impedance
>1000 ohms
Supply voltage
9 to 52 V phantom power to DIN 45596
Current consumption
Connector
3-pin XLR
Finish
silver gray
Net weight
320 g / 11.3 oz.
Shipping weight
950 g / 2.1 lbs.
Patent(s)
Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.