Price | €50.63 Original price was: €50.63.€44.32Current price is: €44.32. incl. GR VAT | €113.00 Original price was: €113.00.€99.00Current price is: €99.00. incl. GR VAT | €1,090.00 Original price was: €1,090.00.€959.00Current price is: €959.00. incl. GR VAT | €170.94 Original price was: €170.94.€165.00Current price is: €165.00. incl. GR VAT | €701,900.00 Original price was: €701,900.00.€80.00Current price is: €80.00. incl. GR VAT | €391.00 Original price was: €391.00.€375.36Current price is: €375.36. incl. GR VAT |
Content | A perfect introductory performance mic, the high-output MB 1k is designed for use as a lead, backup, or choral vocal microphone. It features Audio-Technica's Hi-ENERGY® neodymium magnet structure for maximum output and fast transient response, lockable MagnaLock™ switch design for silent on/off operation, and a corrosion-resistant gold-plated XLRM-type connector.
High-output design for vocals that cut through the mix
Unidirectional dynamic element design
Rugged all-metal construction
Hi-ENERGY® neodymium magnet for improved output and transient response
Reduced handling noise thanks to anti-shock engineering
Silent on-off operation thanks to MagnaLock™ switch design
Corrosion-resistant gold-plated XLRM-type connector
Element: Neodymium Dynamic
Polar Pattern: Unidirectional
Frequency Response: 80-12,000 Hz
Open Circuit Sensitivity: -53 dB (2.2 mV) re 1V at 1 Pa
Impedance: 600 ohms
Switch: MagnaLock™ on/off
Weight: 11.9 oz (337 g)
Dimensions: 7.27" (184.7 mm) long, 2.19" (55.6 mm) head diameter
Output Connector: Integral 3-pin gold-plated XLRM-type
Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter |
The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
Electro-Voice Cobalt CO9
The Co9 is a favorite among vocalists across all musical genres.
Technical Specifications
Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag
| The Beta 87 microphone has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now features a new design and has been renamed the Beta 87A TM.
In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel when hand-held. In addition, the Beta 87A now includes the A25D break-resistant swivel adapter.
The Shure Model Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level (SPL) capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
- Smooth, tailored frequency response provides detail, accuracy, and warmth for vocals
- Extremely accurate supercardioid pattern at all frequencies provides the highest gain-before-feedback
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
Reviews
There are no reviews yet.